aboutsummaryrefslogtreecommitdiff
path: root/gnu
AgeCommit message (Collapse)Author
2019-01-17installer: Rename "Ok" buttons to "OK".Mathieu Othacehe
* gnu/installer/newt/page.scm: s/Ok/OK/. * gnu/installer/newt/partition.scm: Ditto. * gnu/installer/newt/user.scm: Ditto.
2019-01-17installer: parted: Do not call BLKRRPART on loop devices.Mathieu Othacehe
* gnu/installer/parted.scm (with-delay-device-in-use?): Return immediately if the file-name passed as argument designates a loop device.
2019-01-17installer: Various renamins follow-up.Mathieu Othacehe
s/path/file and s/crypt/encrypt. * gnu/installer/newt/partition.scm: Apply renamings. * gnu/installer/parted.scm: Ditto.
2019-01-17installer: Various renamings.Mathieu Othacehe
1. s/partitionment/partitioning/ 2. s/crypted/encrypted/ * gnu/installer.scm (installer-steps): Apply renamings. * gnu/installer/newt/partition.scm (run-disk-page): ditto, * gnu/installer/parted.scm (auto-partition): ditto, (luks-format-and-open): ditto, (luks-close): ditto, (user-partitions->configuration): ditto.
2019-01-17installer: parted: Use read-luks-partition-uuid instead ofMathieu Othacehe
find-partition-by-luks-uuid. * gnu/installer/parted.scm (user-partition->mapped-device): Replace read-luks-partition-uuid by find-partition-by-luks-uuid, (user-partition->file-system): only compute uuid if the partition is not encrypted.
2019-01-17file-systems: Add read-luks-partition-uuid.Mathieu Othacehe
Add a specific procedure to read luks partition uuid. * gnu/build/file-systems.scm (luks-partition-field-reader): New procedure ... (luks-partition-uuid-predicate): ... used here, (read-luks-partition-uuid): new exported procedure.
2019-01-17installer: Clear screen upon exit.Mathieu Othacehe
* gnu/installer/newt.scm (exit): Call clear-screen after newt-finish, (exit-error): ditto.
2019-01-17installer: partionment: Add encryption support.Mathieu Othacehe
* gnu/installer.scm (set-installer-path): Add cryptsetup. * gnu/installer/newt/partition.scm (prompt-luks-passwords): New procedure, (run-partioning-page): Add the possibility to set encryption to "On" on a partition and choose a label, add a new partition scheme: "Guided - using the entire disk with encryption", prompt for encryption passwords before proceeding to formating. * gnu/installer/parted.scm (<user-partition>)[crypt-label], [crypt-password]: New fields, (partition-description): add the encryption label, (user-partition-description): add an encryption field, (auto-partition): add two partitioning schemes: entire-crypted-root and entire-crypted-root-home, (call-with-luks-key-file): new procedure, (user-partition-upper-path): new procedure, (luks-format-and-open): new procedure, (luks-close): new procedure, (format-user-partitions): format and open luks partitions before creating file-system. (mount-user-partitions): use the path returned by user-partition-upper-path, (umount-user-partitions): close the luks partitions, (user-partition->file-system): set device field to label for luks partitions and to uuid for the rest, (user-partition->mapped-device): new procedure, (user-partitions->configuration): add mapped-devices field.
2019-01-17installer: partition: Fix typo.Mathieu Othacehe
* gnu/installer/newt/partition.scm (run-disk-page): Fix typo.
2019-01-17installer: partition: Fix swaping and use syscalls.Mathieu Othacehe
* gnu/installer/parted.scm (start-swaping): Remove it, (stop-swaping): Remove it, (start-swapping): New procedure using swapon syscall, (stop-swapping): New procedure using swapoff syscall, (with-mounted-partitions): Use previous start-swapping and stop-swapping procedures.
2019-01-17installer: menu: Fix typo.Mathieu Othacehe
* gnu/installer/newt/menu.scm (run-menu-page): Fix typo.
2019-01-17installer: partition: Precise when using Manual/Guided partionment.Mathieu Othacehe
* gnu/installer/newt/partition.scm (run-disk-page)[guided?]: New argument. Use guided? to determine if we are proceeding to a guided or a manuel partitioning and precise it the title and info-text.
2019-01-17installer: Display an eventual backtrace in a page.Mathieu Othacehe
* gnu/installer.scm (installer-program): Write the backtrace in "/tmp/last-installer-error" and pass the filename to installer-exit-error. * gnu/installer/newt.scm (exit-error): Display the file passed above in a textbox.
2019-01-17installer: Make exit button optional for run-file-textbox-page.Mathieu Othacehe
* gnu/installer/newt/page.scm (run-file-textbox-page)[exit-button?]: New argument.
2019-01-17installer: Make sure every sentence is dot terminated.Mathieu Othacehe
gnu/installer/newt/hostname.scm: Finish sentences by a dot. gnu/installer/newt/network.scm: Ditto. gnu/installer/newt/page.scm: Ditto. gnu/installer/newt/partition.scm: Ditto. gnu/installer/newt/user.scm: Ditto. gnu/installer/newt/wifi.scm: Ditto.
2019-01-17installer: partition: Differenciate Back button from Exit button.Mathieu Othacehe
* gnu/installer/newt/partition.scm (run-label-page): Pass the button text as an argument, (run-disk-page): Call run-label-page with the appropriate button text.
2019-01-17installer: network: Do not show an empty technology list.Mathieu Othacehe
If no technology is detected, ask the user if he prefers to continue or to exit the installer. * gnu/installer/newt/network.scm (run-technology-page): Run a choice-window if technology-items procedure returns an empty list.
2019-01-17installer: keymap: Fix keymap selection of layouts with not variant.Mathieu Othacehe
* gnu/installer/newt/keymap.scm (run-keymap-page): Test if the layout has no variant at 'variant step, instead of raising a condition at 'layout step.
2019-01-17installer: keymap: Do not fail on non-kmscon terminals.Mathieu Othacehe
kmscon-update-keymap fails on non kmscon terminals because KEYMAP_UPDATE environment variable is not defined. As it is convenient to test the installer on a regular terminal, do nothing if KEYMAP_UPDATE is missing. * gnu/installer/keymap.scm (kmscon-update-keymap): Do nothing if KEYMAP_UPDATE is not defined.
2019-01-17installer: Turn "Cancel" buttons into "Exit" buttons.Mathieu Othacehe
This change and previous ones were, Suggested-by: Thorsten Wilms <t_w_@freenet.de> here: https://lists.gnu.org/archive/html/guix-devel/2018-11/msg00330.html gnu/installer/newt/ethernet.scm: Turn cancel into exit. gnu/installer/newt/final.scm: Ditto. gnu/installer/newt/keymap.scm: Ditto. gnu/installer/newt/locale.scm: Ditto. gnu/installer/newt/network.scm: Ditto. gnu/installer/newt/page.scm: Ditto. gnu/installer/newt/partition.scm: Ditto. gnu/installer/newt/services.scm: Ditto. gnu/installer/newt/timezone.scm: Ditto. gnu/installer/newt/user.scm: Ditto. gnu/installer/newt/wifi.scm: Ditto.
2019-01-17installer: locale: Set English as the default language.Mathieu Othacehe
* gnu/installer/newt/locale.scm (sort-languages): New procedure ... (run-locale-page)[locale-steps]: ... used here to make english the default language.
2019-01-17installer: locale: Make clear that the point is to select a glibc locale.Mathieu Othacehe
* gnu/installer/newt/locale.scm (run-language-page): Be more specific about what is a locale and what are the different steps involved in the info messages.
2019-01-17installer: Reorder partitionment step.Mathieu Othacehe
* gnu/installer.scm (installer-steps): Run partitionment step after keymap step, so that the keyboard is correctly mapped when filling the mount-point entry in partitionment page.
2019-01-17installer: Fix compute calls.Mathieu Othacehe
* gnu/installer/newt/keymap.scm (run-keymap-page): Add missing argument to compute procedure. * gnu/installer/newt/network.scm (run-network-page): Ditto.
2019-01-17installer: Remove group selection in user page.Mathieu Othacehe
Assume that the user's group is always "users". * gnu/installer/newt/user.scm (run-user-add-page): Remove group fields, (run-user-page): ditto.
2019-01-17installer: Reorder local.mk.Mathieu Othacehe
* gnu/local.mk (GNU_SYSTEM_MODULES): Reorder list.
2019-01-17installer: Add partitioning support.Mathieu Othacehe
* gnu/installer.scm (installer-steps): Add partitioning step. * gnu/installer/newt.scm (newt-installer): Add partition-page field. * gnu/installer/newt/partition.scm: New file. * gnu/installer/parted.scm: New file. * gnu/installer/record (installer): New partition-page field. * gnu/local.mk (GNU_SYSTEM_MODULES): Add new files. * po/guix/POTFILES.in: Add new files.
2019-01-17installer: Add user module.Mathieu Othacehe
* gnu/installer/user.scm: New file.
2019-01-17installer: Fix comments.Mathieu Othacehe
* gnu/installer.scm (installer-steps): Fix comments.
2019-01-17installer: Fix ethernet connection.Mathieu Othacehe
* gnu/installer/newt/ethernet.scm (connect-ethernet-service): Return the service passed as parameter.
2019-01-17installer: Redirect to TTY3 root shell for unguided install.Mathieu Othacehe
* gnu/installer/newt/welcome.scm (run-welcome-page): Switch to TTY3 for unguided shell based install.
2019-01-17installer: Add new pages.Mathieu Othacehe
* gnu/installer/newt/page.scm (run-scale-page): New exported procedure, (run-checkbox-tree-page): ditto, (run-file-textbox-page): ditto.
2019-01-17installer: Add hostname.Mathieu Othacehe
* gnu/installer/hostname.scm: New file. * gnu/installer.scm (installer-program): Use new module above. * gnu/local.mk (GNU_SYSTEM_MODULES): Add new file. * po/guix/POTFILES.in: Add new file.
2019-01-17installer: Add services page.Mathieu Othacehe
Add a page to select services, for now only desktop environments choice is available. * gnu/installer.scm (steps): Add services step. * gnu/installer/newt.scm (newt-installer): Add services-page field. * gnu/installer/newt/services.scm: New file. * gnu/installer/record.scm (installer): Add services-page field. * gnu/installer/services.scm: New file. * gnu/local.mk (GNU_SYSTEM_MODULES): Add new files. * po/guix/POTFILES.in: Add new files.
2019-01-17installer: Do not ask for keyboard model.Mathieu Othacehe
Suppose that the keyboard model is "pc105". * gnu/installer.scm (apply-keymap): Remove model ... * gnu/installer/newt/keymap.scm (run-keymap-page): passed here. (run-model-page): remove procedure * gnu/installer/record.scm (installer): Edit keymap-page prototype in comment. * gnu/installer/keymap.scm (default-keyboard-model): New exported parameter.
2019-01-17installer: Add configuration formatter.Mathieu Othacehe
* gnu/installer.scm (installer-steps): Add configuration-formatter procedures. * gnu/installer/final.scm: New file. * gnu/installer/locale.scm (locale->configuration): New exported procedure. * gnu/installer/newt.scm (newt-installer): Add final page. * gnu/installer/newt/final.scm: New file. * gnu/installer/record.scm (installer): Add final-page field. * gnu/installer/timezone.scm (posix-tz->configuration): New exported procedure. * gnu/installer/steps.scm (installer-step): Rename configuration-proc field to configuration-formatter. (%installer-configuration-file): New exported parameter, (%installer-target-dir): ditto, (%configuration-file-width): ditto, (format-configuration): new exported procedure, (configuration->file): new exported procedure.
2019-01-17installer: Add new utils.Mathieu Othacehe
* gnu/installer/utils.scm (nearest-exact-integer): New exported procedure, (read-percentage): ditto, (run-shell-command): ditto.
2019-01-17installer: Remove "selection" from all titles.Mathieu Othacehe
* gnu/installer/newt/hostname.scm (run-hostname-page): Remove selection from page title, (run-variant-page): ditto. * gnu/installer/newt/keymap.scm (run-layout-page): Ditto. * gnu/installer/newt/locale.scm (run-layout-page): Ditto, (run-territory-page): ditto, (run-codeset-page): ditto, (run-modifier-page): ditto * gnu/installer/newt/network.scm (run-territory-page): Ditto. * gnu/installer/newt/timezone.scm (run-timezone-page): Ditto. * gnu/installer/newt/wifi.scm (run-wifi-page): Ditto.
2019-01-17file-systems: Export read-partition-label and read-partition-uuid.Mathieu Othacehe
* gnu/build/file-systems.scm (read-partition-label): Export it, (read-partition-uuid): ditto.
2019-01-17gnu: Add guile-parted.Mathieu Othacehe
* gnu/packages/guile.scm (guile-parted): New variable.
2019-01-17gnu: guile-newt: Update to revision 4.Mathieu Othacehe
* gnu/packages/guile.scm (guile-newt): Update to revision 4.
2019-01-17services: herd: Allow to pass arguments to start-service.Mathieu Othacehe
* gnu/services/herd.scm (start-service)[arguments]: New optional argument.
2019-01-17tests: Rename %test-encrypted-os to %test-encrypted-root-os.Mathieu Othacehe
* gnu/tests/install.scm (%test-encrypted-os): Rename to %test-encrypted-root-os for consistency with its system-test name.
2019-01-17installer: Fix locale installation.Mathieu Othacehe
For some mysterious reason, calling 'setlocale' as first instruction of installer-builder does not install unicode support correctly. So set LANG env variable and start the installer until this is understood. * gnu/installer.scm (installer-program): Wrap installer-builder to have the opportunity to set LANG environment variable before starting the installer.
2019-01-17installer: Move everything to the build side.Mathieu Othacehe
* gnu/installer.scm: Rename to ... * gnu/installer/record.scm: ... this. * gnu/installer/build-installer.scm: Move everything to the build side and rename to gnu/installer.scm. * gnu/installer/newt.scm: Remove all the gexps and add depencies to newt modules as this code will only be used on the build side by now. * gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it, (dist_installer_DATA): New rule to install installer's aux-files. * gnu/system/install.scm (%installation-services): Use only 'installer-program' from (gnu installer). The installer is now choosen on the build side. * guix/self.scm (*system-modules*): Restore previous behaviour and add all installer files to #:extra-files field of the scheme-node. * po/guix/POTFILES.in: Adapt it.
2019-01-17installer: Rewrite welcome page.Mathieu Othacehe
The welcome page is the only page using absolute positioning for the newt components, so that the page occupies all the screen space. This is becoming too hard to manage, so switch to grid management like elsewhere, even if the result is less appealing. Also add an info text to the page with a mention on how to switch back to the original installer. * gnu/installer/newt/welcome.scm (run-menu-page): Use a vertically stacked grid instead of hard window placement.
2019-01-17gnu: installer: Launch the installer as kmscon login-program.Mathieu Othacehe
Source /etc/environment just before starting the installer. The login program is supposed to load the environment variables of this file through PAM, but as we replace it by the installer, they are no longer available. This is mostly useful for the LANG environment variable. * gnu/installer/build-installer.scm (installer-program-launcher): New exported procedure. * gnu/system/install.scm (%installation-services): Restore most of the origin code. kmscon is only started on TTY1, and the graphical installer is the login-program.
2019-01-17configure: Disable installer build by default.Mathieu Othacehe
Only build installer if "--enable-installer" is passed. In that case only, the support for Guile-newt becomes mandatory. * configure.ac: Add --enable-installer argument. Export ENABLE_INSTALLER conditional according to the argument value. * gnu/local.mk (GNU_SYSTEM_MODULES): Remove installer modules and build them only if ENABLE_INSTALLER is set.
2019-01-17installer: newt: Locate the logo within local-file.Mathieu Othacehe
* gnu/installer/newt.scm (logo): Remove it, (welcome-page): Use a relative path to locate the logo.
2019-01-17installer: newt: Use scheme-modules* instead of scheme-modules.Mathieu Othacehe
* gnu/installer/newt.scm (modules): Use scheme-modules*.
generated by cgit