Age | Commit message (Collapse) | Author |
|
This fixes system cross-compilation.
* gnu/system/locale.scm (single-locale-directory)[build]: Use the native
GZIP and LIBC.
|
|
|
|
* gnu/services/dbus.scm (polkit-service-type)[description]: New field.
* gnu/services/dict.scm (dicod-service-type)[description]: New field.
* gnu/services/dns.scm (knot-service-type)[description]: New field.
* gnu/services/networking.scm (dhcpd-service-type)[description]: New field.
* gnu/services/shepherd.scm (shepherd-root-service-type)[description]:
New field.
* gnu/services/xorg.scm (slim-service-type)[description]: New field.
(screen-locker-service-type)[description]: New field.
* gnu/system/pam.scm (pam-root-service-type)[description]: New field.
* gnu/system/shadow.scm (account-service-type)[description]: New field.
|
|
* gnu/system/vm.scm (system-docker-image): Add #:shared-network? and
pass it to 'containerized-operating-system'.
(qemu-image):
* guix/scripts/system.scm (system-derivation-for-action): Pass
#:shared-network? to 'system-docker-image'.
* doc/guix.texi (Invoking guix system): Document it.
|
|
|
|
* gnu/build/vm.scm (install-efi, make-iso9660-image): Remove those procedures
that are now implemented in (gnu build image) module,
(initialize-hard-disk): remove efi support.
* gnu/system/vm.scm (iso9660-image): Remove it,
(qemu-image): adapt it to remove ISO9660 support.
|
|
Raw disk-images and ISO9660 images are created in a Qemu virtual machine. This
is quite fragile, very slow, and almost unusable without KVM.
For all these reasons, add support for host image generation. This implies the
use new image generation mechanisms.
- Raw disk images: images of partitions are created using tools such as mke2fs
and mkdosfs depending on the partition file-system type. The partition
images are then assembled into a final image using genimage.
- ISO9660 images: the ISO root directory is populated within the store. GNU
xorriso is then called on that directory, in the exact same way as this is
done in (gnu build vm) module.
Those mechanisms are built upon the new (gnu image) module.
* gnu/image.scm: New file.
* gnu/system/image.scm: New file.
* gnu/build/image: New file.
* gnu/local.mk: Add them.
* gnu/system/vm.scm (system-disk-image): Rename to system-disk-image-in-vm.
* gnu/ci.scm (qemu-jobs): Adapt to new API.
* gnu/tests/install.scm (run-install): Ditto.
* guix/scripts/system.scm (system-derivation-for-action): Ditto.
|
|
* gnu/system/vm.scm (operating-system-uuid): Move to ...
* gnu/system.scm: ... here.
|
|
* gnu/system/linux-initrd.scm (file-system-packages): Add F2FS fsck.
|
|
* gnu/system/install.scm (installation-os)[packages]: Add f2fs-tools.
|
|
This eases transition for anyone reconfiguring and still having profiles
with packages using the former libc.
* gnu/system/locale.scm (%default-locale-libcs): Add GLIBC-2.29.
|
|
|
|
* gnu/system/linux-initrd.scm (file-system-type-modules): Add f2fs module.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
|
|
* gnu/system/linux-initrd.scm (expression->initrd): Change from
%GUILE-STATIC-STRIPPED to %GUILE-3.0-STATIC-STRIPPED.
|
|
This reverts commit 785919121066a10b291d783b6903b5e368e992a8, which is no longer
needed since uvesafb was added in 557e6820a77b24f8f3f03f28ee473137b1caeb64.
|
|
This allows download to run.
* gnu/system/hurd.scm (cross-hurd-image): Add /etc/group with guixbuilder.
|
|
* gnu/system/hurd.scm (%base-packages/hurd): Add less, which.
|
|
Conflicts:
gnu/local.mk
gnu/packages/backup.scm
gnu/packages/emacs-xyz.scm
gnu/packages/guile.scm
gnu/packages/lisp.scm
gnu/packages/openldap.scm
gnu/packages/package-management.scm
gnu/packages/web.scm
gnu/packages/xorg.scm
|
|
* gnu/system/file-systems.scm (%control-groups): Add "pids".
* gnu/services/docker.scm (docker-shepherd-service): Resolve a TODO.
This has allowed me to make a specific configuration of nsjail work.
|
|
* gnu/system.scm (operating-system-directory-base-entries): Return a
regular, non-monadic value.
* gnu/services.scm (system-derivation): Adjust accordingly.
* gnu/system/linux-container.scm (container-essential-services): Likewise.
|
|
|
|
* gnu/system/vm.scm: Do not import (gnu packages make-bootstrap).
|
|
Conflicts:
etc/news.scm
gnu/local.mk
gnu/packages/bootloaders.scm
gnu/packages/linphone.scm
gnu/packages/linux.scm
gnu/packages/tls.scm
gnu/system.scm
|
|
Because the installer's uvesafb service loads uvesafb only on some machines.
This is a follow-up to commit 0ad60b2a89d6d387236466e0bcdd61ac489fca37.
* gnu/system/install.scm (uvesafb-shepherd-service): Adjust provision and
description fields.
|
|
|
|
* gnu/system/install.scm (%installation-services)[gc-root-service-type]: Add
GC root for GUILE-3.0 instead of GUILE-2.2.
|
|
Until now, 'user-homes' happened to start right after 'user-processes'
and before services that depend on a home directory but the dependency
was not explicit. This addresses it.
* gnu/system/shadow.scm (account-service-type): Extend
USER-PROCESSES-SERVICE-TYPE.
|
|
|
|
|
|
This is a follow-up to commit 557e6820a77b24f8f3f03f28ee473137b1caeb64.
* gnu/system/install.scm (uvesafb-shepherd-service): Check
that /dev/fb0 is not already present.
|
|
Fixes <https://bugs.gnu.org/40538>.
Machines without Kernel Mode Setting (those with many old and current AMD
GPUs, SiS GPUs, …) need uvesafb to show the GUI installer. Some may also need
a kernel parameter like nomodeset or vga=793, but we leave that for the user
to specify in GRUB.
* gnu/system/install.scm (uvesafb-shepherd-service): New procedure.
(uvesafb-service-type): New variable.
(%installation-services): Add it.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
|
|
* gnu/system/hurd.scm (%base-packages/hurd): Add GUILE-COLORIZED and
GUILE-READLINE.
(cross-hurd-image)[hurd-directives]: Add /root/.guile.
|
|
This fixes
In procedure getaddrinfo: Servname not supported for ai_socktype
* gnu/system/hurd.scm (%base-packages/hurd): Add net-base, inetutils.
(cross-hurd-image): Add /etc/{services,protocols} from net-base.
|
|
* gnu/system/hurd.scm (compile-manifest): New procedure.
(cross-hurd-image)[for-hurd, hurd-os]: Remove.
[cross-built, cross-built-entry]: New procedures.
[system-profile]: New variable.
[grub.cfg]: Use 'cross-built'.
[profile]: Rename to...
[etc-profile]: ... this, and adjust accordingly.
[hurd-directives]: Create /run/current-system/profile and /etc/profile.
Adjust arguments to 'qemu-image'.
|
|
* gnu/system/hurd.scm (%base-packages/hurd): New variable.
(cross-hurd-image)[for-hurd]: New function.
(cross-hurd-image)[hurd-os]: Use them.
(cross-hurd-image)[profile]: Hack'y .profile for root, only setting PATH.
|
|
* gnu/system/hurd.scm (cross-hurd-image): Add /etc/{hostname,motd,login}
and /root.
|
|
This allows login.c to succeed for root.
* gnu/system/hurd.scm (cross-hurd-image): Link /bin/sh to full the full bash.
|
|
* gnu/system/hurd.scm: Generate hard-coded /etc/{passwd,shadow},
allows running chown in MAKEDEV and loggin in.
|
|
* gnu/packages/hurd.scm (hurd): Substitute /libexec/.
* gnu/system/hurd.scm (cross-hurd-image): Add symlink /etc/ttys =>
<hurd>/etc/ttys.
|
|
This allows running
mount -o remount,rw /
successfully.
* gnu/system/hurd.scm (cross-hurd-image): Create a hard coded fstab and add it
to hurd-os.
|
|
* gnu/system/hurd.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
|
|
* gnu/build/vm.scm (root-partition-initializer): Add #:make-device-nodes
parameter and use it.
* gnu/system/vm.scm (qemu-image): Add #:device-node parameter. Pass
#:make-device-nodes to 'root-partition-initializer'.
|
|
* gnu/build/vm.scm (<partition>)[file-system-options]: New field.
(create-ext-file-system, create-fat-file-system)
(format-partition): Add #:options and honor it.
(initialize-partition): Pass #:options to 'format-partition'.
* gnu/system/vm.scm (qemu-image): Add #:file-system-options and use it
for the root partition.
|
|
* gnu/build/vm.scm (root-partition-initializer): Add #:extra-directives
parameter and pass it to 'populate-root-file-system'.
* gnu/system/vm.scm (qemu-image): Add #:extra-directives parameter and
pass it to 'root-partition-initializer'.
|
|
|
|
This fixes a regression introduced in 8e53fe2b91d2776bc1529e7b34967c8f1d9edc32
where 'guix system vm' would no longer be using virtio.
* gnu/system/vm.scm (common-qemu-options): Add "-nic user,model=virtio-net-pci".
|
|
This is a followup to a328f66a9e16d7bae765d8bc088e4a97037e6e2b.
* gnu/system/vm.scm (iso9660-image): Add #:substitutable? and pass it to
'expression->derivation-in-linux-vm'.
(system-disk-image): Pass #:substitutable? to 'iso9660-image'.
|
|
This is a followup to a328f66a9e16d7bae765d8bc088e4a97037e6e2b.
* gnu/system/vm.scm (iso9660-image): Add #:substitutable? and pass it to
'expression->derivation-in-linux-vm'.
(system-disk-image): Pass #:substitutable? to 'iso9660-image'.
|
|
Conflicts:
etc/news.scm
gnu/local.mk
gnu/packages/check.scm
gnu/packages/cross-base.scm
gnu/packages/gimp.scm
gnu/packages/java.scm
gnu/packages/mail.scm
gnu/packages/sdl.scm
gnu/packages/texinfo.scm
gnu/packages/tls.scm
gnu/packages/version-control.scm
|
|
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Add
#:substitutable? parameter. Pass it to 'gexp->derivation'.
(qemu-image): Add #:substitutable? and pass it to
'expression->derivation-in-linux-vm'.
(system-disk-image): Add #:substitutable? and pass it to 'qemu-image'.
|