| Age | Commit message (Expand) | Author |
|---|
| 2022-06-07 | gnu: install: Add uvesafb service only on targets that support v86d....Fixes <https://issues.guix.gnu.org/55806>.
* gnu/system/install.scm (%installation-services): Refactor into a
procedure, so that it can capture the system it's installing for.
Conditionally add uvesafb-service-type based on whether v86d is
supported by the target architecture.
(installation-os)[services]: Use the %installation-service procedure.
(uvesafb-shepherd-service): Remove %host-type checks.
Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>
| Josselin Poiret |
| 2022-05-18 | services: Add more description fields....* gnu/services.scm (simple-service): Add 'description' field.
* gnu/services/base.scm (udev-rules-service): Likewise.
* gnu/system/install.scm (configuration-template-service-type): Likewise.
* gnu/tests.scm (marionette-service-type): Likewise.
| Ludovic Courtès |
| 2021-12-12 | services: Define '%loopback-static-networking'....* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
| Ludovic Courtès |
| 2021-12-12 | services: static-networking: Change interface to mimic netlink....* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
| Ludovic Courtès |
| 2021-08-29 | Migrate to the new 'targets' field of bootloader-configuration....The old 'target' field is deprecated; adjust the sources to use the new
'targets' one instead.
* doc/guix-cookbook.texi<target>: Replace by 'targets'.
* gnu/bootloader/grub.scm: Likewise.
* gnu/installer/parted.scm: Likewise.
* gnu/machine/digital-ocean.scm: Likewise.
* gnu/system/examples/asus-c201.tmpl: Likewise
* gnu/system/examples/bare-bones.tmpl: Likewise
* gnu/system/examples/bare-hurd.tmpl: Likewise
* gnu/system/examples/beaglebone-black.tmpl: Likewise
* gnu/system/examples/desktop.tmpl: Likewise
* gnu/system/examples/docker-image.tmpl: Likewise
* gnu/system/examples/lightweight-desktop.tmpl: Likewise
* gnu/system/examples/vm-image.tmpl: Likewise
* gnu/system/examples/yggdrasil.tmpl: Likewise
* gnu/system/hurd.scm: Likewise
* gnu/system/images/hurd.scm: Likewise
* gnu/system/images/novena.scm: Likewise
* gnu/system/images/pine64.scm: Likewise
* gnu/system/images/pinebook-pro.scm: Likewise
* gnu/system/images/rock64.scm: Likewise
* gnu/system/install.scm: Likewise
* gnu/system/vm.scm: Likewise
* gnu/tests.scm: Likewise
* gnu/tests/ganeti.scm: Likewise
* gnu/tests/install.scm: Likewise
* gnu/tests/nfs.scm: Likewise
* gnu/tests/telephony.scm: Likewise
* tests/boot-parameters.scm: Likewise
* tests/system.scm: Likewise
| Maxim Cournoyer |
| 2021-08-12 | system: install, hurd: Use 'setuid-programs'....This is a followup to a7ac19851baab3fbcc40c4b2cf5b00a6ac9cd2f3.
* gnu/system/install.scm (installation-os)[setuid-programs]: Use
'setuid-program'.
* gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'.
| Ludovic Courtès |
| 2021-01-13 | services: shepherd: 'shepherd-service-type' requires documentation....* gnu/services/shepherd.scm (shepherd-service-type): Require a
'description' form.
* gnu/services/base.scm (root-file-system-service-type)
(rngd-service-type, host-name-service-type):
(virtual-terminal-service-type, console-keymap-service-type)
(syslog-service-type, swap-service-type)
(kmscon-service-type): Add description.
* gnu/services/networking.scm (dhcp-client-service-type): Likewise.
* gnu/system/install.scm (cow-store-service-type): Likewise.
* gnu/system/linux-container.scm (dummy-networking-service-type):
Likewise.
* gnu/system/mapped-devices.scm (device-mapping-service-type):
Likewise.
* tests/guix-system.sh: Likewise.
| Ludovic Courtès |
| 2020-12-15 | store-copy: 'populate-store' can optionally deduplicate files....Until now deduplication was performed as an additional pass after
copying files, which involve re-traversing all the files that had just
been copied.
* guix/store/deduplication.scm (copy-file/deduplicate): New procedure.
* tests/store-deduplication.scm ("copy-file/deduplicate"): New test.
* guix/build/store-copy.scm (populate-store): Add #:deduplicate?
parameter and honor it.
* tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f
to 'populate-store'.
* gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate?
to 'populate-store'. Pass #:deduplicate? #f to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
* gnu/build/install.scm (populate-single-profile-directory): Pass
#:deduplicate? #f to 'populate-store'.
* gnu/build/linux-initrd.scm (build-initrd): Likewise.
* guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New
procedure.
[build]: Pass it as an argument to 'source-module-closure'.
* guix/scripts/pack.scm (squashfs-image)[build]: Wrap in
'with-extensions'.
* gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New
procedure.
[builder]: Pass it to 'source-module-closure'.
* gnu/system/install.scm (cow-store-service-type)[import-module?]: New
procedure. Pass it to 'source-module-closure'.
| Ludovic Courtès |
| 2020-12-11 | install: Discover local substitute servers....* gnu/installer/substitutes.scm: New file.
* gnu/installer/newt/substitutes.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add them.
* po/guix/POTFILES.in: Add gnu/installer/newt/substitutes.scm.
* gnu/installer/proxy.scm (with-silent-shepherd): Move to ...
* gnu/installer/utils.scm: ... here.
* gnu/installer/record.scm (<installer>)[substitutes-page]: New field.
* gnu/installer/newt.scm (substitutes-page): New procedure,
(newt-installer): register it.
* gnu/installer.scm (installer-steps): Add "substitutes-page" step.
* gnu/system/install.scm (%installation-services): Add avahi-service-type and
enable substitute server discover in guix-service-type.
[<name-service-switch>]: Set it to %mdns-host-lookup-nss.
| Mathieu Othacehe |
| 2020-10-15 | install: Deduplicate packages with %base-package sets....* gnu/system.scm (%base-packages-interactive): Add nvi.
* gnu/system/install.scm (installation-os)[packages]: Remove parted,
gptfdisk, ddrescue, cryptsetup, mdadm, dosfstools, btrfs-progs,
f2fs-tools, jfstools, openssh, wireless-tools, iw,
wpa-supplicant-minimal, iproute, bash-completion, nvi. Add
%base-packages-disk-utilities.
| Efraim Flashner |
| 2020-10-11 | Revert "Revert "install: Pass "modprobe.blacklist=radeon".""...This reverts commit 73ddcab6075f60ef9b3cd72a35fbf7f5d622b6ef.
Blacklisting has become necessary again on my AMD machines, else
the installer screen stays black.
| Florian Pelz |
| 2020-09-02 | install: Factorize cow-store procedure....Move the cow-store procedure from the service declaration in (gnu system
install) to (gnu build install), so that it can be called from within a
different context than Shepherd.
* gnu/build/install.scm (mount-cow-store, unmount-cow-store): New procedures.
* gnu/system/install.scm (make-cow-store): Remove it,
(cow-store-service-type): adapt it accordingly.
| Mathieu Othacehe |
| 2020-07-31 | file-system: Add efivarfs support....Tools such as efibootmgr rely on the deprecated /sys/firmware/efi/vars API as
well as on the new /sys/firmware/efi/efivars API. The latter needs to be
mounted.
Reported by Keyhenge here:
https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00274.html
Here is the efivarfs documentation:
https://www.kernel.org/doc/Documentation/filesystems/efivarfs.txt.
* gnu/system/file-systems.scm (%efivars-file-system): New exported variable,
(%base-file-systems): add it.
* gnu/system/install.scm (%efivars-file-system): Add it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
| Mathieu Othacehe |
| 2020-06-08 | system: install: Add default libcs to gc-roots....During the installation, it may be needed to build locales that are not
covered by glibc-utf8-locales. Make sure that the libraries required to build
locales are available.
This is a follow-up of 0eed77127592323d89f56c215a15374a1aaae110.
* gnu/system/install.scm (installation-os)[services]: Add
%default-locale-libcs to gc-root-service-type.
| Mathieu Othacehe |
| 2020-05-05 | Merge branch 'master' into core-updates | Marius Bakke |
| 2020-05-03 | install: Add f2fs-tools to the installation image....* gnu/system/install.scm (installation-os)[packages]: Add f2fs-tools.
| Danny Milosavljevic |
| 2020-05-02 | Merge branch 'master' into core-updates | Marius Bakke |
| 2020-05-01 | Revert "install: Pass "modprobe.blacklist=radeon"."...This reverts commit 785919121066a10b291d783b6903b5e368e992a8, which is no longer
needed since uvesafb was added in 557e6820a77b24f8f3f03f28ee473137b1caeb64.
| Florian Pelz |
| 2020-04-23 | Merge branch 'master' into core-updates... Conflicts:
etc/news.scm
gnu/local.mk
gnu/packages/bootloaders.scm
gnu/packages/linphone.scm
gnu/packages/linux.scm
gnu/packages/tls.scm
gnu/system.scm
| Marius Bakke |
| 2020-04-20 | installer: Rename uvesafb shepherd service to maybe-uvesafb....Because the installer's uvesafb service loads uvesafb only on some machines.
This is a follow-up to commit 0ad60b2a89d6d387236466e0bcdd61ac489fca37.
* gnu/system/install.scm (uvesafb-shepherd-service): Adjust provision and
description fields.
| Florian Pelz |
| 2020-04-19 | installer: Add GC root for Guile 3.0....* gnu/system/install.scm (%installation-services)[gc-root-service-type]: Add
GC root for GUILE-3.0 instead of GUILE-2.2.
| Marius Bakke |
| 2020-04-15 | Merge branch 'master' into core-updates | Marius Bakke |
| 2020-04-14 | installer: Only load uvesafb kernel module when needed....This is a follow-up to commit 557e6820a77b24f8f3f03f28ee473137b1caeb64.
* gnu/system/install.scm (uvesafb-shepherd-service): Check
that /dev/fb0 is not already present.
| Florian Pelz |
| 2020-04-11 | installer: Load uvesafb kernel module....Fixes <https://bugs.gnu.org/40538>.
Machines without Kernel Mode Setting (those with many old and current AMD
GPUs, SiS GPUs, …) need uvesafb to show the GUI installer. Some may also need
a kernel parameter like nomodeset or vga=793, but we leave that for the user
to specify in GRUB.
* gnu/system/install.scm (uvesafb-shepherd-service): New procedure.
(uvesafb-service-type): New variable.
(%installation-services): Add it.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
| Florian Pelz |
| 2020-02-11 | system: Stop using canonical-package....Usage of canonical-package outside of thunked fields breaks cross-compilation,
see: https://lists.gnu.org/archive/html/guix-devel/2019-12/msg00410.html.
* gnu/installer.scm (installer-program): Remove canonical-package.
* gnu/services/base.scm (<nscd-cache>): Ditto,
(%base-services): ditto.
* gnu/services/xorg.scm: Remove useless canonical-package import.
* gnu/system.scm (%base-packages): Remove canonical-package.
* gnu/system/install.scm (%installation-services): Ditto,
(installation-os): ditto.
* gnu/system/locale.scm (single-locale-directory): Ditto.
| Mathieu Othacehe |
| 2020-01-03 | install: Add jfsutils to the installation image....* gnu/system/install.scm (installation-os)[packages]: Add jfsutils.
| Tobias Geerinckx-Rice |
| 2019-12-01 | install: Pass 'local-file' literal strings for proper resolution....This is a followup to 99c45877a984dd0148151b2e304afef6fb04f1a5, which
introduced a regression: "guix system build gnu/system/install.scm"
would fail to find the .tmpl files.
* gnu/system/install.scm (/etc/configuration-files)[file]: Remove.
[directory]: Use 'local-file' with a literal string.
| Ludovic Courtès |
| 2019-10-18 | gnu: Add u-boot-firefly-rk3399....* gnu/packages/bootloaders (u-boot-firefly-rk3399): New variable.
* gnu/bootloader/u-boot (install-firefly-rk3399-u-boot): New variable.
(u-boot-firefly-rk3399-bootloader): New variable.
* gnu/system/install (define firefly-rk3399-installation-os): New variable.
| Vagrant Cascadian |
| 2019-10-18 | gnu: Add u-boot-rock64-rk3328....* gnu/packages/bootloaders (u-boot-rock64-rk3328): New variable.
* gnu/bootloader/u-boot (install-rock64-rk3328-u-boot): New variable.
(u-boot-rock64-rk3328-bootloader): New variable.
* gnu/system/install (define rock64-installation-os): New variable.
| Vagrant Cascadian |
| 2019-10-18 | gnu: Add u-boot-rockpro64-rk3399...* gnu/packages/bootloaders.scm (u-boot-rockpro64-rk3399): New exported
variable.
(u-boot-2019.10): New variable.
* gnu/bootloader/u-boot.scm (u-boot-rockpro64-rk3399-bootloader): New exported
variable.
(install-rockpro64-rk3399-u-boot): New variable.
* gnu/system/install.scm (rockpro64-installation-os): New exported variable.
Adjusted-by: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Caliph Nomble <nomble@palism.com>
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
| Caliph Nomble |
| 2019-06-29 | etc: Remove hydra.gnu.org.pub key....* etc/substitutes/hydra.gnu.org.pub: Delete file.
* guix/self.scm (miscellaneous-files): Don't install it.
* Makefile.am (dist_pkgdata_DATA): Remove it.
* gnu/services/base.scm (%default-authorized-guix-keys): Likewise.
(hydra-key-authorization): Rename to…
(substitute-key-authorization): …this. Adjust only call site.
| Tobias Geerinckx-Rice |
| 2019-05-13 | install: Add node name in Russian....* gnu/system/install.scm (%installation-node-names): Add "ru".
| Ludovic Courtès |
| 2019-04-25 | install: Add node name in Castellano....* gnu/system/install.scm (%installation-node-names): Add "es".
| Ludovic Courtès |
| 2019-04-23 | install: Pass "quiet" to the kernel....This is a followup to 5582aa8e31bf88f981caedeb4fbbb758486b6ca7.
* gnu/system/install.scm (installation-os)[kernel-arguments]: Add "quiet".
| Ludovic Courtès |
| 2019-04-21 | install: Pass "modprobe.blacklist=radeon"....* gnu/system/install.scm (installation-os)[kernel-arguments]: New field.
| Ludovic Courtès |
| 2019-04-15 | install: Provide a meaningful label....* gnu/system/install.scm (installation-os)[label]: New field.
| Ludovic Courtès |
| 2019-04-12 | install: Use a font with more glyphs on tty2....* gnu/system/install.scm (%installation-services): For
'console-font-service-type', use LatGrkCyr-8x16 on tty2.
| Ludovic Courtès |
| 2019-04-12 | installer: Choosing a locale opens the translated manual on tty2....Suggested by Florian Pelz.
* gnu/system/install.scm (%installation-node-names): New variable.
(log-to-info): Expect the chosen locale as an argument. Compute the
language, Info file name, and node name. Install the locale.
(documentation-shepherd-service): Add 'locale' parameter to the 'start'
action and honor it. Set GUIX_LOCPATH and TERM as environment variables
for the process.
* gnu/installer.scm (apply-locale): Use (gnu services herd). Call
'stop-service' and 'start-service' with the chosen locale.
| Ludovic Courtès |
| 2019-04-12 | install: Add standalone documentation service....* gnu/system/install.scm (log-to-info): Add 'tty' and 'user'
parameters. Open the tty and change UIDs/GIDs.
(documentation-shepherd-service): New procedure.
(%documentation-users, documentation-service-type): New variables.
(%installation-services): Use it instead of 'mingetty-service'.
| Ludovic Courtès |
| 2019-04-07 | install: Tweak motd....* gnu/system/install.scm (%installation-services): Tweak motd.
| Ludovic Courtès |
| 2019-04-07 | install: Remove "GuixSD"....* gnu/system/install.scm (%installation-services): Remove "Guix System
Distribution" from motd.
| Ludovic Courtès |
| 2019-03-25 | accounts: Add default value for the 'home-directory' field of <user-account>....* gnu/system/accounts.scm (<user-account>)[home-directory]: Mark as
thunked and add a default value.
(default-home-directory): New procedure.
* doc/guix.texi (User Accounts): Remove 'home-directory' from example.
* gnu/system/examples/bare-bones.tmpl: Likewise.
* gnu/system/examples/beaglebone-black.tmpl: Likewise.
* gnu/system/examples/desktop.tmpl: Likewise.
* gnu/system/examples/docker-image.tmpl: Likewise.
* gnu/system/examples/lightweight-desktop.tmpl: Likewise.
* gnu/system/install.scm (installation-os): Likewise.
* gnu/tests.scm (%simple-os): Likewise.
* gnu/tests/install.scm (%minimal-os, %minimal-os-on-vda):
(%separate-home-os, %encrypted-root-os, %btrfs-root-os): Likewise.
* tests/accounts.scm ("allocate-passwd")
("allocate-passwd with previous state"): Likewise.
| Ludovic Courtès |
| 2019-03-13 | Remove traces of "GuixSD"....* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Remove
mentions of "GuixSD".
* gnu/bootloader/grub.scm (install-grub-efi): Likewise.
* gnu/build/vm.scm (make-iso9660-image): Change default #:volume-id to
"Guix_image".
(initialize-hard-disk): Search for the "Guix_image" label.
* gnu/ci.scm (system-test-jobs, tarball-jobs): Remove "GuixSD".
* gnu/installer/newt/welcome.scm (run-welcome-page): Likewise.
* gnu/packages/audio.scm (supercollider)[description]: Likewise.
* gnu/packages/curl.scm (curl): Likewise.
* gnu/packages/emacs.scm (emacs): Likewise.
* gnu/packages/gnome.scm (network-manager): Likewise.
* gnu/packages/julia.scm (julia): Likewise.
* gnu/packages/linux.scm (alsa-plugins): Likewise.
(powertop, wireless-regdb): Likewise.
* gnu/packages/package-management.scm (guix): Likewise.
* gnu/packages/polkit.scm (polkit): Likewise.
* gnu/packages/tex.scm (texlive-bin): Likewise.
* gnu/services/base.scm (file-systems->fstab): Likewise.
* gnu/services/cups.scm (%cups-activation): Likewise.
* gnu/services/mail.scm (%dovecot-activation): Likewise.
* gnu/services/messaging.scm (prosody-configuration)[log]: Likewise.
* gnu/system/examples/vm-image.tmpl (vm-image-motd): Likewise.
* gnu/system/install.scm (installation-os)[file-systems]: Change root
file system label to "Guix_image".
* gnu/system/mapped-devices.scm (check-device-initrd-modules):
Remove "GuixSD".
* gnu/system/vm.scm (system-docker-image): Likewise.
(system-disk-image)[root-label]: Change to "Guix_image".
* gnu/tests/install.scm (run-install): Remove "GuixSD".
* guix/modules.scm (guix-module-name?): Likewise.
* nix/libstore/optimise-store.cc: Likewise.
| Ludovic Courtès |
| 2019-02-10 | install: Use (gnu package certs) module for the nss-certs package....* gnu/system/install.scm: Use (gnu package certs).
| Pierre Neidhardt |
| 2019-02-10 | install: Add nss-certs to the image....* gnu/system/install.scm (installation-os)[packages]: Add nss-certs.
| Pierre Neidhardt |
| 2019-01-17 | installer: Move everything to the build side....* gnu/installer.scm: Rename to ...
* gnu/installer/record.scm: ... this.
* gnu/installer/build-installer.scm: Move everything to the build side and
rename to gnu/installer.scm.
* gnu/installer/newt.scm: Remove all the gexps and add depencies to newt
modules as this code will only be used on the build side by now.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it,
(dist_installer_DATA): New rule to install installer's aux-files.
* gnu/system/install.scm (%installation-services): Use only
'installer-program' from (gnu installer). The installer is now choosen on the
build side.
* guix/self.scm (*system-modules*): Restore previous behaviour and add all
installer files to #:extra-files field of the scheme-node.
* po/guix/POTFILES.in: Adapt it.
| Mathieu Othacehe |
| 2019-01-17 | gnu: installer: Launch the installer as kmscon login-program....Source /etc/environment just before starting the installer. The login program
is supposed to load the environment variables of this file through PAM, but as
we replace it by the installer, they are no longer available. This is mostly
useful for the LANG environment variable.
* gnu/installer/build-installer.scm (installer-program-launcher): New exported
procedure.
* gnu/system/install.scm (%installation-services): Restore most of the origin
code. kmscon is only started on TTY1, and the graphical installer is the
login-program.
| Mathieu Othacehe |
| 2019-01-17 | gnu: Add graphical installer support....* configure.ac: Require that guile-newt is available.
* gnu/installer.scm: New file.
* gnu/installer/aux-files/logo.txt: New file.
* gnu/installer/build-installer.scm: New file.
* gnu/installer/connman.scm: New file.
* gnu/installer/keymap.scm: New file.
* gnu/installer/locale.scm: New file.
* gnu/installer/newt.scm: New file.
* gnu/installer/newt/ethernet.scm: New file.
* gnu/installer/newt/hostname.scm: New file.
* gnu/installer/newt/keymap.scm: New file.
* gnu/installer/newt/locale.scm: New file.
* gnu/installer/newt/menu.scm: New file.
* gnu/installer/newt/network.scm: New file.
* gnu/installer/newt/page.scm: New file.
* gnu/installer/newt/timezone.scm: New file.
* gnu/installer/newt/user.scm: New file.
* gnu/installer/newt/utils.scm: New file.
* gnu/installer/newt/welcome.scm: New file.
* gnu/installer/newt/wifi.scm: New file.
* gnu/installer/steps.scm: New file.
* gnu/installer/timezone.scm: New file.
* gnu/installer/utils.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add previous files.
* gnu/system.scm: Export %root-account.
* gnu/system/install.scm (%installation-services): Use kmscon instead of linux
VT for all tty.
(installation-os)[users]: Add the graphical installer as shell of the root
account.
[packages]: Add font related packages.
* po/guix/POTFILES.in: Add installer files.
| Mathieu Othacehe |
| 2019-01-16 | install: Avoid deprecated 'gpm-service' procedure....* gnu/system/install.scm (%installation-services): Use the 'service'
form instead of 'gpm-service'.
| Ludovic Courtès |
| 2019-01-11 | services: Deprecate a few more service procedures....These procedures were already either undocumented (and de facto
deprecated) or documented as deprecated or redundant.
* gnu/services/base.scm (guix-service, guix-publish-service): Mark as
deprecated.
* gnu/services/mcron.scm (mcron-service): Likewise.
* gnu/services/networking.scm (tor-service): Likewise.
* doc/guix.texi (Scheduled Job Execution): Remove 'mcron-service' and
adjust example.
(Networking Services): Remove 'tor-service'.
* gnu/tests/base.scm (%mcron-os): Use 'mcron-service-type' instead of
'mcron-service'.
* gnu/tests/networking.scm (%tor-os): Use 'tor-service-type' instead of
'tor-service'.
* tests/guix-system.sh: Likewise.
| Ludovic Courtès |
