aboutsummaryrefslogtreecommitdiff
path: root/gnu/installer
AgeCommit message (Collapse)Author
2019-04-08installer: Use 'append' and 'list' instead of 'cons*'.Ludovic Courtès
* gnu/installer/services.scm (system-services->configuration): Use 'append' and 'list' instead of 'cons*'.
2019-04-08installer: Generate 'set-xorg-configuration' snippet.Ludovic Courtès
* gnu/installer/services.scm (system-services->configuration): Add 'set-xorg-configuration' service. * gnu/installer/steps.scm (format-configuration): Add 'xorg' service module.
2019-04-08installer: Xfce service uses the 'service' form.Ludovic Courtès
* gnu/installer/services.scm (%system-services): Adjust Xfce snippet to use the 'service' form.
2019-04-07installer: Adjust welcome page message.Ludovic Courtès
* gnu/installer/newt/welcome.scm (run-welcome-page): Make the message less scary.
2019-04-07installer: Internationalize service "names".Ludovic Courtès
* gnu/installer/services.scm (%system-services): Mark networking service names with 'G_'. * gnu/installer/newt/services.scm (run-networking-cbt-page): Pass 'system-service-name' through 'G_'.
2019-04-07installer: Offer NM, Connman, and DHCP to non-desktop installs.Ludovic Courtès
* gnu/installer/services.scm (%system-services): Add NetworkManager, Connman, and the DHCP client. * gnu/installer/newt/services.scm (run-networking-cbt-page): Add 'network-management?' parameter and honor it. (run-services-page): Adjust call accordingly.
2019-04-07installer: Add dialog to select networking services.Ludovic Courtès
* gnu/installer/newt/services.scm (run-networking-cbt-page): New procedure. (run-services-page): Call it. * gnu/installer/services.scm (%system-services): Add OpenSSH and Tor. (networking-system-service?): New procedure. * gnu/installer/steps.scm (format-configuration): Add 'networking' and 'ssh' to the service modules.
2019-04-07installer: Generalize desktop environments to system services.Ludovic Courtès
* gnu/installer/services.scm (<desktop-environment>): Rename to... (<system-service>): ... this. Add a 'type' field. (%desktop-environments): Rename to... (%system-services): ... this. (desktop-system-service?): New procedure. (desktop-environments->configuration): Rename to... (system-services->configuration): ... this. Determine the base list of services based on whether SERVICES contains at least one "desktop" service. * gnu/installer/newt/services.scm (run-desktop-environments-cbt-page): Adjust accordingly. * gnu/installer.scm (installer-steps): Likewise.
2019-04-07installer: Remove SLiM-specific instructions.Ludovic Courtès
* gnu/installer/newt/services.scm (run-desktop-environments-cbt-page): Remove "with F1".
2019-04-07installer: Fix wording for "Internet access."Ludovic Courtès
* gnu/installer/newt/network.scm (run-technology-page): Fix wording for "Internet access."
2019-04-07installer: Use the normalized codeset in the 'locale' field.Ludovic Courtès
* gnu/installer/locale.scm (normalize-codeset): New procedure. (locale->locale-string): Use it.
2019-04-07installer: Simplify locale dialogs.Ludovic Courtès
* gnu/installer/newt/locale.scm (run-language-page): Simplify text. (run-territory-page): Likewise. (run-codeset-page): Likewise. (run-locale-page): Don't call 'run-codeset-page' when "UTF-8" is among the codesets of LOCALES.
2019-03-27services: Deprecate 'xfce-desktop-service'.Ludovic Courtès
* gnu/services/desktop.scm (xfce-desktop-service-type)[default-value] [description]: New fields. (xfce-desktop-service): Deprecate. * gnu/system/examples/desktop.tmpl: Use the (service …) form. * gnu/installer/services.scm (%desktop-environments): Add TODO comment. * doc/guix.texi (Desktop Services): Adjust accordingly, and fix spelling of "Xfce" throughout.
2019-03-27services: Deprecate 'gnome-desktop-service'.Ludovic Courtès
* gnu/services/desktop.scm (gnome-desktop-service-type)[default-value]: New field. (gnome-desktop-service): Deprecate. * gnu/installer/services.scm (%desktop-environments): Use the (service …) form for GNOME. * gnu/system/examples/desktop.tmpl: Likewise. * doc/guix.texi (Desktop Services): Adjust accordingly.
2019-03-27installer: Use the (service …) form for MATE.Ludovic Courtès
* gnu/installer/services.scm (%desktop-environments): Use 'mate-desktop-service-type' for MATE.
2019-03-27installer: Ask for confirmation before formatting partitions.Ludovic Courtès
* gnu/installer/newt/page.scm (run-confirmation-page): New procedure. * gnu/installer/newt/partition.scm (draw-formatting-page): Call it.
2019-03-27installer: Produce an 'initrd-modules' field if needed.Ludovic Courtès
* gnu/installer/parted.scm (root-user-partition?): New procedure. (bootloader-configuration): Use it. (user-partition-missing-modules, initrd-configuration): New procedures. (user-partitions->configuration): Call 'initrd-configuration'.o * gnu/installer.scm (not-config?): Rename to... (module-to-import?): ... this. Add cases to exclude non-installer and non-build (gnu …) modules. (installer-program)[installer-builder]: Add GUIX to the extension list.
2019-03-27installer: Emit 'bootloader' field before 'swap-devices'.Ludovic Courtès
* gnu/installer/parted.scm (user-partitions->configuration): Move 'bootloader' section above 'swap-devices'.
2019-03-25installer: Set the system's 'keyboard-layout' field.Ludovic Courtès
* gnu/installer/newt/keymap.scm (keyboard-layout->configuration): New procedure. * gnu/installer.scm (compute-keymap-step): Return RESULT. (installer-steps) <'keymap>: Add 'configuration-formatter' field. (installer-program): Use (gnu installer newt keymap). * gnu/installer/parted.scm (bootloader-configuration): Set 'keyboard-layout'.
2019-03-13installer: network: Adjust wording.Ludovic Courtès
* gnu/installer/newt/network.scm (wait-service-online): Adjust wording of the messages.
2019-03-13Remove traces of "GuixSD".Ludovic Courtès
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Remove mentions of "GuixSD". * gnu/bootloader/grub.scm (install-grub-efi): Likewise. * gnu/build/vm.scm (make-iso9660-image): Change default #:volume-id to "Guix_image". (initialize-hard-disk): Search for the "Guix_image" label. * gnu/ci.scm (system-test-jobs, tarball-jobs): Remove "GuixSD". * gnu/installer/newt/welcome.scm (run-welcome-page): Likewise. * gnu/packages/audio.scm (supercollider)[description]: Likewise. * gnu/packages/curl.scm (curl): Likewise. * gnu/packages/emacs.scm (emacs): Likewise. * gnu/packages/gnome.scm (network-manager): Likewise. * gnu/packages/julia.scm (julia): Likewise. * gnu/packages/linux.scm (alsa-plugins): Likewise. (powertop, wireless-regdb): Likewise. * gnu/packages/package-management.scm (guix): Likewise. * gnu/packages/polkit.scm (polkit): Likewise. * gnu/packages/tex.scm (texlive-bin): Likewise. * gnu/services/base.scm (file-systems->fstab): Likewise. * gnu/services/cups.scm (%cups-activation): Likewise. * gnu/services/mail.scm (%dovecot-activation): Likewise. * gnu/services/messaging.scm (prosody-configuration)[log]: Likewise. * gnu/system/examples/vm-image.tmpl (vm-image-motd): Likewise. * gnu/system/install.scm (installation-os)[file-systems]: Change root file system label to "Guix_image". * gnu/system/mapped-devices.scm (check-device-initrd-modules): Remove "GuixSD". * gnu/system/vm.scm (system-docker-image): Likewise. (system-disk-image)[root-label]: Change to "Guix_image". * gnu/tests/install.scm (run-install): Remove "GuixSD". * guix/modules.scm (guix-module-name?): Likewise. * nix/libstore/optimise-store.cc: Likewise.
2019-02-18gnu: Remove unused TIMEZONE-LISTBOX-HEIGTH.Tobias Geerinckx-Rice
* gnu/installer/newt/timezone.scm (timezone-listbox-heigth): Delete variable.
2019-02-18gnu: Fix some typos in the installer.Tobias Geerinckx-Rice
* gnu/installer/connman.scm (connman-connect-with-auth): Fix typo in documentation. * gnu/installer/newt/keymap.scm (sort-variants): Likewise. * gnu/installer/newt/page.scm (run-listbox-selection-page): Likewise. * gnu/installer/parted.scm (mkpart): Likewise. * gnu/installer/newt/utils.scm (destroy-form-and-pop): Likewise. * gnu/installer/newt/wifi.scm (run-unknown-error-page): Fix typo. (wifi-listbox-heigth): Rename to… (wifi-listbox-height): …this, and adjust caller. * gnu/installer/timezone.scm (locate-childrens): Rename to… (locate-children): …this. Adjust all callers.
2019-01-17installer: Fix manual partitioning.Ludovic Courtès
* gnu/installer/newt/partition.scm (run-partioning-page): When METHOD is 'manual, use 'filter-map' on DEVICES, not 'map', since 'disk-new' can return #f.
2019-01-17installer: "formating" → "formatting".Ludovic Courtès
* gnu/installer/newt/partition.scm, gnu/installer/parted.scm: Replace "formating" with "formatting".
2019-01-17installer: Adjust messages on the final page.Ludovic Courtès
* gnu/installer/newt/final.scm (run-config-display-page) (run-install-success-page, run-install-failed-page): Adjust messages.
2019-01-17installer: partition: Add encryption password confirmation.Mathieu Othacehe
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Add password confirmation page.
2019-01-17installer: keymap: Put English layout and international variant ahead.Mathieu Othacehe
* gnu/installer/newt/keymap.scm (sort-layouts): New procedure, (sort-variants): new procedure, (run-keymap-page): use the two procedures above to sort layouts and variants.
2019-01-17installer: Remove debug popup.Mathieu Othacehe
* gnu/installer/newt/partition.scm (run-partioning-page): Remove debug partition popup.
2019-01-17installer: welcome: Put "Graphical installer" ahead.Mathieu Othacehe
* gnu/installer/newt/welcome.scm (run-welcome-page): Propose "Graphical install" before shell based install.
2019-01-17installer: Rename "Ok" buttons to "OK".Mathieu Othacehe
* gnu/installer/newt/page.scm: s/Ok/OK/. * gnu/installer/newt/partition.scm: Ditto. * gnu/installer/newt/user.scm: Ditto.
2019-01-17installer: parted: Do not call BLKRRPART on loop devices.Mathieu Othacehe
* gnu/installer/parted.scm (with-delay-device-in-use?): Return immediately if the file-name passed as argument designates a loop device.
2019-01-17installer: Various renamins follow-up.Mathieu Othacehe
s/path/file and s/crypt/encrypt. * gnu/installer/newt/partition.scm: Apply renamings. * gnu/installer/parted.scm: Ditto.
2019-01-17installer: Various renamings.Mathieu Othacehe
1. s/partitionment/partitioning/ 2. s/crypted/encrypted/ * gnu/installer.scm (installer-steps): Apply renamings. * gnu/installer/newt/partition.scm (run-disk-page): ditto, * gnu/installer/parted.scm (auto-partition): ditto, (luks-format-and-open): ditto, (luks-close): ditto, (user-partitions->configuration): ditto.
2019-01-17installer: parted: Use read-luks-partition-uuid instead ofMathieu Othacehe
find-partition-by-luks-uuid. * gnu/installer/parted.scm (user-partition->mapped-device): Replace read-luks-partition-uuid by find-partition-by-luks-uuid, (user-partition->file-system): only compute uuid if the partition is not encrypted.
2019-01-17installer: Clear screen upon exit.Mathieu Othacehe
* gnu/installer/newt.scm (exit): Call clear-screen after newt-finish, (exit-error): ditto.
2019-01-17installer: partionment: Add encryption support.Mathieu Othacehe
* gnu/installer.scm (set-installer-path): Add cryptsetup. * gnu/installer/newt/partition.scm (prompt-luks-passwords): New procedure, (run-partioning-page): Add the possibility to set encryption to "On" on a partition and choose a label, add a new partition scheme: "Guided - using the entire disk with encryption", prompt for encryption passwords before proceeding to formating. * gnu/installer/parted.scm (<user-partition>)[crypt-label], [crypt-password]: New fields, (partition-description): add the encryption label, (user-partition-description): add an encryption field, (auto-partition): add two partitioning schemes: entire-crypted-root and entire-crypted-root-home, (call-with-luks-key-file): new procedure, (user-partition-upper-path): new procedure, (luks-format-and-open): new procedure, (luks-close): new procedure, (format-user-partitions): format and open luks partitions before creating file-system. (mount-user-partitions): use the path returned by user-partition-upper-path, (umount-user-partitions): close the luks partitions, (user-partition->file-system): set device field to label for luks partitions and to uuid for the rest, (user-partition->mapped-device): new procedure, (user-partitions->configuration): add mapped-devices field.
2019-01-17installer: partition: Fix typo.Mathieu Othacehe
* gnu/installer/newt/partition.scm (run-disk-page): Fix typo.
2019-01-17installer: partition: Fix swaping and use syscalls.Mathieu Othacehe
* gnu/installer/parted.scm (start-swaping): Remove it, (stop-swaping): Remove it, (start-swapping): New procedure using swapon syscall, (stop-swapping): New procedure using swapoff syscall, (with-mounted-partitions): Use previous start-swapping and stop-swapping procedures.
2019-01-17installer: menu: Fix typo.Mathieu Othacehe
* gnu/installer/newt/menu.scm (run-menu-page): Fix typo.
2019-01-17installer: partition: Precise when using Manual/Guided partionment.Mathieu Othacehe
* gnu/installer/newt/partition.scm (run-disk-page)[guided?]: New argument. Use guided? to determine if we are proceeding to a guided or a manuel partitioning and precise it the title and info-text.
2019-01-17installer: Display an eventual backtrace in a page.Mathieu Othacehe
* gnu/installer.scm (installer-program): Write the backtrace in "/tmp/last-installer-error" and pass the filename to installer-exit-error. * gnu/installer/newt.scm (exit-error): Display the file passed above in a textbox.
2019-01-17installer: Make exit button optional for run-file-textbox-page.Mathieu Othacehe
* gnu/installer/newt/page.scm (run-file-textbox-page)[exit-button?]: New argument.
2019-01-17installer: Make sure every sentence is dot terminated.Mathieu Othacehe
gnu/installer/newt/hostname.scm: Finish sentences by a dot. gnu/installer/newt/network.scm: Ditto. gnu/installer/newt/page.scm: Ditto. gnu/installer/newt/partition.scm: Ditto. gnu/installer/newt/user.scm: Ditto. gnu/installer/newt/wifi.scm: Ditto.
2019-01-17installer: partition: Differenciate Back button from Exit button.Mathieu Othacehe
* gnu/installer/newt/partition.scm (run-label-page): Pass the button text as an argument, (run-disk-page): Call run-label-page with the appropriate button text.
2019-01-17installer: network: Do not show an empty technology list.Mathieu Othacehe
If no technology is detected, ask the user if he prefers to continue or to exit the installer. * gnu/installer/newt/network.scm (run-technology-page): Run a choice-window if technology-items procedure returns an empty list.
2019-01-17installer: keymap: Fix keymap selection of layouts with not variant.Mathieu Othacehe
* gnu/installer/newt/keymap.scm (run-keymap-page): Test if the layout has no variant at 'variant step, instead of raising a condition at 'layout step.
2019-01-17installer: keymap: Do not fail on non-kmscon terminals.Mathieu Othacehe
kmscon-update-keymap fails on non kmscon terminals because KEYMAP_UPDATE environment variable is not defined. As it is convenient to test the installer on a regular terminal, do nothing if KEYMAP_UPDATE is missing. * gnu/installer/keymap.scm (kmscon-update-keymap): Do nothing if KEYMAP_UPDATE is not defined.
2019-01-17installer: Turn "Cancel" buttons into "Exit" buttons.Mathieu Othacehe
This change and previous ones were, Suggested-by: Thorsten Wilms <t_w_@freenet.de> here: https://lists.gnu.org/archive/html/guix-devel/2018-11/msg00330.html gnu/installer/newt/ethernet.scm: Turn cancel into exit. gnu/installer/newt/final.scm: Ditto. gnu/installer/newt/keymap.scm: Ditto. gnu/installer/newt/locale.scm: Ditto. gnu/installer/newt/network.scm: Ditto. gnu/installer/newt/page.scm: Ditto. gnu/installer/newt/partition.scm: Ditto. gnu/installer/newt/services.scm: Ditto. gnu/installer/newt/timezone.scm: Ditto. gnu/installer/newt/user.scm: Ditto. gnu/installer/newt/wifi.scm: Ditto.
2019-01-17installer: locale: Set English as the default language.Mathieu Othacehe
* gnu/installer/newt/locale.scm (sort-languages): New procedure ... (run-locale-page)[locale-steps]: ... used here to make english the default language.