aboutsummaryrefslogtreecommitdiff
path: root/gnu/bootloader/grub.scm
AgeCommit message (Expand)Author
2022-09-08gnu: bootloader: grub: Add support for chain-loader....* gnu/bootloader/grub.scm (grub-configuration-file): Add support for chain-loader. Signed-off-by: Julien Lepiller <julien@lepiller.eu> tiantian
2022-06-24image: Add support for 32bit UEFI....* gnu/bootloader/grub.scm (grub-efi32-bootloader): New variable. (install-grub-efi32): New variable. * gnu/build/bootloader.scm (install-efi): Add a 'targets' keyword argument. (install-efi-loader): Likewise. * gnu/build/image.scm (initialize-efi32-partition): New procedure. * gnu/packages/bootloaders.scm (grub-efi32): New variable. * gnu/system/image.scm (esp32-partition): New variable (efi32-disk-image): New variable. (efi32-raw-image-type): New variable. (system-disk-image)[partition-image]: Set '#:grub-efi32' when calling the partition initializer. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Denis 'GNUtoo' Carikli
2022-06-06bootloader: grub: Add removable grub-efi bootloader option....For single-disk installs (external USBs) and for amnesiac UEFIs, Guix is not found using its default Grub EFI bootloader location of /boot/efi/EFI/Guix/grubx64.efi means the Guix install will not be found. To handle this, we can place the bootloader file in the UEFI specification location, overwriting any other OS that may have placed a file there. This location is namely /boot/efi/EFI/BOOT/BOOTX64.efi. Grub has explicit support for this location/situation with the `--removable` flag. * gnu/bootloader/grub.scm (install-grub-efi-removable) (grub-efi-removable-bootloader): New variables. * doc/guix.texi (Bootloader Configuration): Document it. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Karl Hallsby
2022-01-13bootloader: grub: Fix serial mode....* gnu/bootloader/grub.scm (grub-setup-io): Fix serial mode display by declaring the serial property before the terminal_input and terminal_output properties. Mathieu Othacehe
2021-12-01gnu: system: Add LUKS2 support for the root file system....* gnu/bootloader/grub.scm (grub-configuration-file): Add 'insmod luks2'. * gnu/system/mapped-devices.scm (open-luks-device): Create '/run/cryptsetup/' directory. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Josselin Poiret
2021-08-29Migrate to the new 'targets' field of bootloader-configuration....The old 'target' field is deprecated; adjust the sources to use the new 'targets' one instead. * doc/guix-cookbook.texi<target>: Replace by 'targets'. * gnu/bootloader/grub.scm: Likewise. * gnu/installer/parted.scm: Likewise. * gnu/machine/digital-ocean.scm: Likewise. * gnu/system/examples/asus-c201.tmpl: Likewise * gnu/system/examples/bare-bones.tmpl: Likewise * gnu/system/examples/bare-hurd.tmpl: Likewise * gnu/system/examples/beaglebone-black.tmpl: Likewise * gnu/system/examples/desktop.tmpl: Likewise * gnu/system/examples/docker-image.tmpl: Likewise * gnu/system/examples/lightweight-desktop.tmpl: Likewise * gnu/system/examples/vm-image.tmpl: Likewise * gnu/system/examples/yggdrasil.tmpl: Likewise * gnu/system/hurd.scm: Likewise * gnu/system/images/hurd.scm: Likewise * gnu/system/images/novena.scm: Likewise * gnu/system/images/pine64.scm: Likewise * gnu/system/images/pinebook-pro.scm: Likewise * gnu/system/images/rock64.scm: Likewise * gnu/system/install.scm: Likewise * gnu/system/vm.scm: Likewise * gnu/tests.scm: Likewise * gnu/tests/ganeti.scm: Likewise * gnu/tests/install.scm: Likewise * gnu/tests/nfs.scm: Likewise * gnu/tests/telephony.scm: Likewise * tests/boot-parameters.scm: Likewise * tests/system.scm: Likewise Maxim Cournoyer
2021-04-10bootloader: grub: Fix typo in docstring....* gnu/bootloader/grub.scm (install-grub-efi-netboot): Fix typo. Tobias Geerinckx-Rice
2021-01-17gnu: grub: Use installed unicode font....* gnu/bootloader/grub.scm (setup-gfxterm): Remove parameter font-file. Refer to the installed font in /boot, not in the store. (font-file): Delete obsolete function. (install-grub): When populating a disk-image, install the unicode font, too. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan
2020-12-21system: Allow separated /boot and encrypted root....* gnu/bootloader/grub.scm (grub-configuration-file): New parameter store-crypto-devices. [crypto-devices]: New helper function. [builder]: Use crypto-devices. * gnu/machine/ssh.scm (roll-back-managed-host): Use boot-parameters-store-crypto-devices to provide its contents to the bootloader configuration generation process. * gnu/tests/install.scm (%encrypted-root-not-boot-os, %encrypted-root-not-boot-os): New os declaration. (%encrypted-root-not-boot-installation-script): New script, whose contents were initially taken from %encrypted-root-installation-script. (%test-encrypted-root-not-boot-os): New test. * gnu/system.scm (define-module): Export operating-system-bootoader-crypto-devices and boot-parameters-store-crypto-devices. (<boot-parameters>): Add field store-crypto-devices. (read-boot-parameters): Parse store-crypto-devices field. [uuid-sexp->uuid]: New helper function extracted from device-sexp->device. (operating-system-bootloader-crypto-devices): New function. (operating-system-bootcfg): Use operating-system-bootloader-crypto-devices to provide its contents to the bootloader configuration generation process. (operating-system-boot-parameters): Add store-crypto-devices to the generated boot-parameters. (operating-system-boot-parameters-file): Likewise to the file with the serialized structure. * guix/scripts/system.scm (reinstall-bootloader): Use boot-parameters-store-crypto-devices to provide its contents to the bootloader configuration generation process. * tests/boot-parameters.scm (%default-store-crypto-devices): New variable. (%grub-boot-parameters, test-read-boot-parameters): Use %default-store-crypto-devices. (tests store-crypto-devices): New tests. Miguel Ángel Arruga Vivas
2020-12-15Revert "gnu: grub: Fix unicode font loading when booting over TFTP."...This reverts commit 03fb57ff77b57de510b59485845ed7cb4e0a77a7, which breaks most system tests. Specifically, grub.cfg.drv fails to build: ERROR: In procedure canonicalize-path: In procedure canonicalize-path: No such file or directory Ludovic Courtès
2020-12-14gnu: grub: Fix unicode font loading when booting over TFTP....* gnu/bootloader/grub.scm (eye-candy)(font-file): Fix unicode font loading when booting over TFTP. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan
2020-11-17bootloader: grub: Skip install-grub-efi when producing a disk image....Fixes <http://issues.guix.gnu.org/44353>. Every bootloader should try their best to install themselves using only the MOUNT-POINT and otherwise do nothing. This requirement comes from the necessity to call INSTALL-GRUB when installing the (non-EFI) GRUB bootloader, which needs to populate the root file system with extra modules that cannot be fit in the core.img file, limited in size to 491520 bytes (by the i386-pc format required for legacy BIOS compatibility). As introducing bootloader knowledge at the level of the image code is undesirable, every bootloader should be adapted to support this fall-back for their installation procedure (TODO). * gnu/bootloader/grub.scm (install-grub-efi)[efi-dir]: Skip when the EFI-DIR argument is set to #f. Maxim Cournoyer
2020-11-01system: Generate grub locale directory for grub.cfg....* gnu/bootloader/grub.scm (grub-locale-directory): New function. (grub-configuration-file)[locale-config]: Use grub-locale-directory and avoid the extra search when eye-candy have performed it. Miguel Ángel Arruga Vivas
2020-10-30system: Fix dependency for grub.cfg generation....* gnu/bootloader/grub.scm (eye-candy)[font-file]: Use the bootloader package provided with the configuration. Miguel Ángel Arruga Vivas
2020-10-30system: Fix grub keymap with store in btrfs subvolume....* gnu/bootloader/grub.scm (grub-configuration-file) [keyboard-layout-config]: Use normalize-file. Miguel Ángel Arruga Vivas
2020-10-18system: Use locale information in grub.cfg....* gnu/bootloader/grub.scm (define-module): Add new dependency. (grub-configuration-file): Add locale keyword. (grub-configuration-file)[locale-config]: New variable with generated locale configuration when locale parameter has been provided. [builder]: Add locale-config. Miguel Ángel Arruga Vivas
2020-09-27gnu: grub: Support for network boot via TFTP....* gnu/bootloader/grub.scm (grub-efi-netboot-bootloader): New variable. (install-grub-efi-netboot): New procedure. (grub-root-search): Update comment. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan
2020-09-14gnu: grub: Support loading files from TFTP if the root filesystem is NFS....* gnu/bootloader/grub.scm (grub-root-search): Set the root to "(tftp)" if the searched-for file is stored on NFS. Stefan
2020-09-07bootloader: Use "define" instead of "define*" for all records....* gnu/bootloader/grub.scm (grub-minimal-bootloader): Use "define". (grub-efi-bootloader): Use "define". (grub-mkrescue-bootloader): Use "define". Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan
2020-09-06bootloader: Add comment about grub configuration files....* gnu/bootloader/grub.scm: Add comment about grub configuration files. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan
2020-06-09bootloader: grub: Fix cross-compilation....This is a follow-up of 536c53d347291dcc75e1073af6e6c5c614e0fff4, that do not use the native version of "font-file", breaking cross-compilation. * gnu/bootloader/grub.scm (eye-candy): Use the native version of "font-file". Mathieu Othacehe
2020-06-09gnu: grub: Support graphical gfxterm on all systems....* gnu/bootloaders/grub.scm (eye-candy): Use gfxterm depending only on (bootloader-configuration (terminal-outputs …)), which defaults to '(gfxterm). This makes the system argument obsolete. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Stefan
2020-06-08bootloader: grub: Add support for multiboot....* gnu/bootloader/grub.scm (grub-configuration-file): Add support for multiboot. Jan (janneke) Nieuwenhuizen
2020-05-29bootloader: grub: Rename the btrfs-subvolume-file-name parameter....Following discussion in <https://issues.guix.gnu.org/37305>, it seems more appropriate to give the parameter a more generic name that better describes what it does. * gnu/bootloader/grub.scm (normalize-file): Rename the BTRFS-SUBVOLUME-FILE-NAME parameter to STORE-DIRECTORY-PREFIX, and always assume this argument to be a string. (eye-candy): Likewise. Default STORE-DIRECTORY-PREFIX to "". (grub-configuration-file): Likewise. * gnu/system.scm (operating-system-bootcfg): Adapt. Maxim Cournoyer
2020-05-29bootloader: grub: Use inheritance to define grub-minimal-bootloader....* gnu/bootloader/grub.scm (grub-minimal-bootloader): Inherit from grub-bootloader to avoid field redefinition. Mathieu Othacehe
2020-05-29bootloader: grub: Do not run grub-install when creating a disk-image....* gnu/bootloader/grub.scm (install-grub): When creating a disk-image, grub-install will fail because it lacks root permissions. In that case, do not run grub-install and only copy Grub modules to the /boot directory. Mathieu Othacehe
2020-05-29bootloader: Add 'disk-image-installer'....* gnu/bootloader.scm (<bootloader>)[disk-image-installer]: New field, (bootloader-disk-image-installer): export it. * gnu/bootloader/grub.scm (install-grub-disk-image): New procedure ... (grub-bootloader): ... used as "disk-image-installer" here. (grub-efi-bootloader): set "disk-image-installer" to #f. * gnu/system/image.scm (root-partition?, find-root-partition): Move to "Helpers" section. (root-partition-index): New procedure. (system-disk-image): Honor disk-image-installer, and use it to install the bootloader directly on the disk-image, if supported. Mathieu Othacehe
2020-05-20bootloader: grub: Allow booting from a Btrfs subvolume....* gnu/bootloader/grub.scm (strip-mount-point): Remove procedure. (normalize-file): Add procedure. (grub-configuration-file): New BTRFS-SUBVOLUME-FILE-NAME parameter. When defined, prepend its value to the kernel and initrd file names, using the NORMALIZE-FILE procedure. Adjust the call to EYE-CANDY to pass the BTRFS-SUBVOLUME-FILE-NAME argument. Normalize the KEYMAP file as well. (eye-candy): Add a BTRFS-SUBVOLUME-FILE-NAME parameter, and use it, along with the NORMALIZE-FILE procedure, to normalize the FONT-FILE and IMAGE nested variables. Adjust doc. * gnu/bootloader/depthcharge.scm (depthcharge-configuration-file): Adapt. * gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise. * gnu/system/file-systems.scm (btrfs-subvolume?) (btrfs-store-subvolume-file-name): New procedures. * gnu/system.scm (operating-system-bootcfg): Specify the Btrfs subvolume file name the store resides on to the `operating-system-bootcfg' procedure, using the new BTRFS-SUBVOLUME-FILE-NAME argument. * doc/guix.texi (File Systems): Add a Btrfs subsection to document the use of subvolumes. * gnu/tests/install.scm (%btrfs-root-on-subvolume-os) (%btrfs-root-on-subvolume-os-source) (%btrfs-root-on-subvolume-installation-script) (%test-btrfs-root-on-subvolume-os): New variables. Maxim Cournoyer
2020-05-19gnu: grub: Allow a PNG image and replace "aspect-ratio" with "resolution"....* gnu/bootloaders/grub.scm (<grub-image>): Remove this record and replace it by ... (<grub-theme>)[image]: ... this field with the default from %background-image, (<grub-theme>)[resolution]: ... this field with the defaults from 'width' and 'height' of 'grub-background-image'. (<grub-theme>)[images]: Remove this field. (svg->png): Rename to ... (image->png): ... and use 'copy-file' instead of 'svg->png', if the suffix of the image file is not ".svg". (grub-background-image): Remove the arguments 'width' and 'height'. (grub-theme-image): Add function. (grub-theme-resolution): Add function. (grub-theme-gfxmode): Add function. (grub-image): Remove function. (grub-image?): Remove function. (grub-image-aspect-ratio): Remove function. (grub-image-file): Remove function. (grub-theme-images): Remove function. (%default-theme): Remove variable. (%background-image): Remove variable. Using image formats different to SVG was not possible. For a <grub-image> to be chosen, the 'aspect-ratio' of it had to be 4/3, as the resolution of any image was defaulting to 1024 x 768. There was no code to determine the proper boot-resolution to make any use of a list of images with different aspect-ratios. It seems to be a better solution to only define a single image with any format, and use a given resolution only for the conversion from a SVG file. This also makes the use of a special <grub-image> record unnecessary. Moving the default values from '%background-image' and '%default-theme' into <grub-theme> makes a customisation easier without (inherit) and allows to remove the undocumented variables %background-image' and '%default-theme'. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Stefan
2020-05-16bootloader: grub: Refer to the native 'grub-mklayout' and font file....* gnu/bootloader/grub.scm (eye-candy): Refer to the native FONT-FILE. (keyboard-layout-file): Refer to the native 'grub-mklayout'. Ludovic Courtès
2020-04-08Merge branch 'master' into core-updates... Conflicts: etc/news.scm gnu/local.mk gnu/packages/check.scm gnu/packages/cross-base.scm gnu/packages/gimp.scm gnu/packages/java.scm gnu/packages/mail.scm gnu/packages/sdl.scm gnu/packages/texinfo.scm gnu/packages/tls.scm gnu/packages/version-control.scm Marius Bakke
2020-04-06system: Allow for comma-separated keyboard layouts....Reported by Florian Pelz <pelzflorian@pelzflorian.de>. * gnu/bootloader/grub.scm (keyboard-layout-file): Replace commas with hyphens in the first argument to 'computed-file'. * gnu/system/keyboard.scm (keyboard-layout->console-keymap): Likewise. * doc/guix.texi (Keyboard Layout): Add example. Ludovic Courtès
2020-03-29gnu: bootloader: Add grub-minimal-bootloader....* gnu/bootloader/grub.scm (grub-minimal-bootloader): New variable. Jan Nieuwenhuizen
2020-03-17bootloader: grub: Refactor eye-candy a bit....* gnu/bootloader/grub.scm (eye-candy)[setup-gfxterm-body]: Define the GFXMODE binding using AND-LET* instead of chained AND=>. Add a comment about supporting graphical mode on other systems than x86. Generate configuration string using FORMAT rather than STRING-APPEND. Maxim Cournoyer
2020-03-17bootloader: grub: Use the all_video module in graphic mode....* gnu/bootloader/grub.scm (eye-candy): Load the module 'all_video' which automatically loads all the available and relevant video modules. Maxim Cournoyer
2020-01-25bootloader: grub: Add gfxmode (resolution) override....* gnu/bootloader/grub.scm (<grub-theme>): Add `gfxmode' entry. (eye-candy): Use it. * doc/guix.texi (Bootloader Configuration): Document it. Jan Nieuwenhuizen
2020-01-07Revert "bootloader: grub: Add gfxmode (resolution) override."...This reverts commit a23091880d4dc6115acbfa3b7ef09d731fc5abb0. It causes ‘guix pull’ to fail: <https://paste.debian.net/plain/1125061>. Tobias Geerinckx-Rice
2020-01-07bootloader: grub: Add gfxmode (resolution) override....* gnu/bootloader/grub.scm (<grub-theme>): Add `gfxmode' entry. (eye-candy): Use it. * doc/guix.texi (Bootloader Configuration): Document it. Jan Nieuwenhuizen
2020-01-06Adjust module autoloads....In Guile < 2.9.7, autoloading a module would give you access to all its bindings. In future versions, autoloading a module gives access only to the listed bindings, as per #:select (see <https://bugs.gnu.org/38895>). This commit adjusts autoloads to the new semantics, allowing Guix to be built with Guile 2.9.7/2.9.8. * guix/build/download.scm <top level>: Remove call to 'module-autoload!'. (load-gnutls): New procedure. (tls-wrap): Call it. * guix/git.scm <top level>: Remove call to 'module-autoload!'. (load-git-submodules): New procedure. (update-submodules): Call it instead of 'resolve-interface'. * gnu/bootloader/grub.scm: Replace #:autoload with #:use-module. * gnu/packages.scm: Likewise. * gnu/packages/ssh.scm: Likewise. * gnu/packages/tex.scm: Likewise. * gnu/services/cuirass.scm: Likewise. * gnu/services/mcron.scm: Likewise. * guix/lint.scm: Augment list of bindings in #:autoload. * guix/scripts/build.scm: Likewise. * guix/scripts/gc.scm: Likewise. * guix/scripts/pack.scm: Likewise. * guix/scripts/publish.scm: Likewise. * guix/scripts/pull.scm: Likewise. * guix/utils.scm: Remove unnecessary #:autoload clauses; replace one of them with #:use-module. Ludovic Courtès
2020-01-03bootloader: Mark "grub.cfg" and "extlinux.conf" as non-substitutable....Suggested by <pkill9@runbox.com>. * gnu/bootloader/grub.scm (grub-configuration-file): Pass #:options to 'computed-file'. * gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise. Ludovic Courtès
2019-12-23bootloader: grub: Add firmware setup entry....* gnu/bootloader/grub.scm (grub-configuration-file): Add 'Firmware setup' entry for EFI platform. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Brice Waegeneire
2019-05-09bootloader: grub: Remove unneeded 'terminal_output'....Fixes <https://bugs.gnu.org/35585>. Reported by Florian Pelz <pelzflorian@pelzflorian.de>. This statement was added in 8d058e7b1b1a409d3d9cc29c5650a98db4e78783 but turned out to be unnecessary. * gnu/bootloader/grub.scm (grub-configuration-file): Remove 'terminal_output' statement. Ludovic Courtès
2019-03-24bootloader: Add a 'keyboard-layout' field....* gnu/bootloader/grub.scm (keyboard-layout-file): New procedure. (grub-configuration-file)[keyboard-layout-file]: New variable. [builder]: Use it. * gnu/bootloader.scm (<bootloader-configuration>)[keyboard-layout]: New field. * doc/guix.texi (Bootloader Configuration): Document it. Co-authored-by: nee <nee-git@hidamari.blue> Ludovic Courtès
2019-03-16bootloader: Use 'invoke/quiet' when running 'grub-install' and co....This hides potentially confusing GRUB messages from the user, such as "Installing for i386-pc platform." * gnu/bootloader/extlinux.scm (install-extlinux): Use 'invoke/quiet' instead of 'system*' and 'error'. * gnu/bootloader/grub.scm (install-grub, install-grub-efi): Likewise. * guix/scripts/system.scm (bootloader-installer-script): Guard against 'message-condition?' and handle them properly. Ludovic Courtès
2019-03-13Remove traces of "GuixSD"....* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Remove mentions of "GuixSD". * gnu/bootloader/grub.scm (install-grub-efi): Likewise. * gnu/build/vm.scm (make-iso9660-image): Change default #:volume-id to "Guix_image". (initialize-hard-disk): Search for the "Guix_image" label. * gnu/ci.scm (system-test-jobs, tarball-jobs): Remove "GuixSD". * gnu/installer/newt/welcome.scm (run-welcome-page): Likewise. * gnu/packages/audio.scm (supercollider)[description]: Likewise. * gnu/packages/curl.scm (curl): Likewise. * gnu/packages/emacs.scm (emacs): Likewise. * gnu/packages/gnome.scm (network-manager): Likewise. * gnu/packages/julia.scm (julia): Likewise. * gnu/packages/linux.scm (alsa-plugins): Likewise. (powertop, wireless-regdb): Likewise. * gnu/packages/package-management.scm (guix): Likewise. * gnu/packages/polkit.scm (polkit): Likewise. * gnu/packages/tex.scm (texlive-bin): Likewise. * gnu/services/base.scm (file-systems->fstab): Likewise. * gnu/services/cups.scm (%cups-activation): Likewise. * gnu/services/mail.scm (%dovecot-activation): Likewise. * gnu/services/messaging.scm (prosody-configuration)[log]: Likewise. * gnu/system/examples/vm-image.tmpl (vm-image-motd): Likewise. * gnu/system/install.scm (installation-os)[file-systems]: Change root file system label to "Guix_image". * gnu/system/mapped-devices.scm (check-device-initrd-modules): Remove "GuixSD". * gnu/system/vm.scm (system-docker-image): Likewise. (system-disk-image)[root-label]: Change to "Guix_image". * gnu/tests/install.scm (run-install): Remove "GuixSD". * guix/modules.scm (guix-module-name?): Likewise. * nix/libstore/optimise-store.cc: Likewise. Ludovic Courtès
2018-11-18bootloader: De-monadify configuration file generators....* gnu/bootloader/extlinux.scm: Remove unneeded imports. (extlinux-configuration-file): Use 'computed-file' instead of 'gexp->derivation'. * gnu/bootloader/grub.scm (svg->png): Likewise. (grub-background-image, eye-candy): Adjust accordingly, return non-monadically. (grub-configuration-file): Likewise, and use 'computed-file' instead of 'gexp->derivation'. * gnu/bootloader/u-boot.scm: Remove unneeded imports. * gnu/system.scm: Add 'lower-object' call. Ludovic Courtès
2018-06-26bootloader: grub-efi: Identify as "GuixSD" instead of "grub"....* gnu/bootloader/grub.scm (install-grub-efi): Pass "--bootloader-id" to grub-install. Marius Bakke
2018-06-26bootloader: grub-efi: Support EFI directories relative to MOUNT-POINT....* gnu/bootloader/grub.scm (install-grub-efi): When MOUNT-POINT/EFI-DIR exists, install there rather than EFI-DIR directly. Marius Bakke
2018-06-01bootloader: grub: Use 'with-extensions'....* gnu/bootloader/grub.scm (svg->png): Use 'with-extensions'. Remove 'add-to-load-path' calls. * gnu/build/svg.scm: Use (rsvg) and (cairo) the normal way. Remove 'module-autoload!' calls. Ludovic Courtès
2018-06-01bootloader: grub: Simplify 'svg->png'....* gnu/bootloader/grub.scm (svg->png): Remove now unneeded #:guile-for-build argument. Ludovic Courtès