aboutsummaryrefslogtreecommitdiff
;; -*- mode: scheme; -*-
;; This is an operating system configuration template for a "Docker image"
;; setup, so it has barely any services at all.

(use-modules (gnu))

(operating-system
  (host-name "komputilo")
  (timezone "Europe/Berlin")
  (locale "en_US.utf8")

  ;; This is where user accounts are specified.  The "root" account is
  ;; implicit, and is initially created with the empty password.
  (users (cons (user-account
                (name "alice")
                (comment "Bob's sister")
                (group "users")
                (supplementary-groups '("wheel"
                                        "audio" "video")))
               %base-user-accounts))

  ;; Globally-installed packages.
  (packages %base-packages)

  ;; Because the system will run in a Docker container, we may omit many
  ;; things that would normally be required in an operating system
  ;; configuration file.  These things include:
  ;;
  ;;   * bootloader
  ;;   * file-systems
  ;;   * services such as mingetty, udevd, slim, networking, dhcp
  ;;
  ;; Either these things are simply not required, or Docker provides
  ;; similar services for us.

  ;; This will be ignored.
  (bootloader (bootloader-configuration
               (bootloader grub-bootloader)
               (targets '("does-not-matter"))))
  ;; This will be ignored, too.
  (file-systems (list (file-system
                        (device "does-not-matter")
                        (mount-point "/")
                        (type "does-not-matter"))))

  ;; Guix is all you need!
  (services (list (service guix-service-type))))
+0200'>2021-09-07tests: Disable grafts in 'tests/builders.scm'....This is required since the introduction of the OpenSSL graft in the parent commit so that calling 'package-derivation' in the Python tests would not trigger a build. * tests/builders.scm <top level>: Add '%graft?' call. Ludovic Courtès 2021-07-05tests: Adjust Python "sanity" check tests....This is a followup to 09448c0994390697e876db235a3b773311795238. The 'check-build-failure' procedure would not actually check anything since it did not call 'build-derivations'. However, it was throwing an exception for unrelated reasons, so the tests would pass. * tests/builders.scm (check-build-failure): Use 'guard' instead of 'false-if-exception'. Call 'build-derivations' to actually check for build failures. Ludovic Courtès 2021-03-30build-system: Rewrite using gexps....* guix/packages.scm (expand-input): Remove 'store', 'system', and 'cross-system' parameters; add #:native?. Rewrite to return name/gexp-input tuples. (bag->derivation): Adjust accordingly. Lower (bag-build bag). (bag->cross-derivation): Ditto. Instead of #:native-drvs and #:target-drvs, pass #:build-inputs, #:host-inputs, and #:target-inputs. (%derivation-cache): Remove. * gnu/packages/bootstrap.scm (raw-build): Turn into a monadic procedure. * gnu/packages/commencement.scm (glibc-final)[arguments]: Use 'gexp-input' for the #:allowed-references argument. * guix/build-system/cmake.scm (cmake-build): Remove 'store' parameter. Switch to the use of gexps and 'gexp->derivation'. (lower): Remove #:source from 'private-keywords'. * guix/build-system/glib-or-gtk.scm (glib-or-gtk-build, lower): Likewise. * guix/build-system/font.scm (font-build): Likewise. * guix/build-system/gnu.scm (gnu-build): Likewise, and remove 'canonicalize-reference'. (gnu-cross-build): Likewise, and expect #:build-inputs, #:host-inputs, and #:target-inputs instead of #:native-drvs and #:target-drvs. (lower): Likewise. * guix/build-system/perl.scm (perl-build, lower): Likewise. * guix/build-system/python.scm (python-build, lower): Likewise. * guix/build-system/ruby.scm (ruby-build, lower): Likewise. * guix/build-system/waf.scm (waf-build, lower): Likewise. * guix/build-system/trivial.scm (guile-for-build): Remove. (trivial-build): Remove 'store' parameter, change to gexps. (trivial-cross-build): Ditto, and change to #:build-inputs & co. * guix/build-system/cargo.scm (cargo-build): Change to 'gexp->derivation'. * guix/build-system/copy.scm (copy-build): Likewise. * guix/build-system/dune.scm (dune-build): Likewise. * guix/build-system/guile.scm (guile-build, guile-cross-build): Likewise. * guix/build-system/meson.scm (meson-build): Likewise. * guix/build-system/ocaml.scm (ocaml-build): Likewise. * guix/build-system/scons.scm (scons-build): Likewise. * guix/build-system/texlive.scm (texlive-build): Likewise. * guix/build-system/android-ndk.scm (android-ndk-build): Likewise. * guix/build-system/ant.scm (ant-build): Likewise. * guix/build-system/asdf.scm (asdf-build/source, asdf-build): Likewise. * guix/build-system/chicken.scm (chicken-build): Likewise. * guix/build-system/clojure.scm (clojure-build): Likewise. (source->output-path, maybe-guile->guile): Remove. * guix/build-system/dub.scm (dub-build): Likewise. * guix/build-system/emacs.scm (emacs-build): Likewise. * guix/build-system/go.scm (go-build): Likewise. * guix/build-system/haskell.scm (haskell-build): Likewise. * guix/build-system/julia.scm (julia-build): Likewise. * guix/build-system/linux-module.scm (linux-module-build) (linux-module-build-cross): Likewise. * guix/build-system/maven.scm (maven-build): Likewise. * guix/build-system/minify.scm (minify-build): Likewise. * guix/build-system/node.scm (node-build): Likewise. * guix/build-system/qt.scm (qt-build, qt-cross-build): Likewise. * guix/build-system/r.scm (r-build): Likewise. * guix/build-system/rakudo.scm (rakudo-build): Likewise. * guix/build-system/renpy.scm (renpy-build): Likewise. * tests/builders.scm ("gnu-build"): Call 'store-lower' on 'gnu-build'. Pass #:source parameter. * tests/packages.scm ("search paths"): Use 'abort-to-prompt' instead of a normal return from the 'build' method. ("package->bag, sensitivity to %current-target-system"): Change 'build' to match the new build system signature. squash! build-system: Rewrite using gexps. squash! build-system: Rewrite using gexps. Ludovic Courtès 2021-02-01build/python: Add a sanity check phase....Add a new phase validating the usability of installed Python packages. * gnu/packages/aux-files/python/sanity-check.py: New file. * Makefile.am (AUX_FILES): Register it. * guix/build-system/python.scm (sanity-check.py): New variable. (lower): Add the script as an implicit input. * guix/build/python-build-system.scm: Remove trailing #t. (sanity-check): New phase. (%standard-phases): Use it. * tests/builders.scm: (make-python-dummy) (dummy-ok, dummy-dummy-nosetuptools, dummy-fail-requirements) (dummy-fail-import, dummy-fail-console-script): New variables. ("python-build-system: dummy-ok") ("python-build-system: dummy-dummy-nosetuptools") ("python-build-system: dummy-fail-requirements") ("python-build-system: dummy-fail-import") ("python-build-system: dummy-fail-console-script"): Add tests. Lars-Dominik Braun 2021-01-26build-systems/gnu: Allow unpacking/repacking more kind of files....Before this change, only plain directories, tar or zip archives were supported as the source of a package for the GNU build system; anything else would cause the unpack phase to fail. Origins relying on snippets would suffer from the same problem. This change adds the support to use files of the following extensions: .gz, .Z, .bz2, .lz, and .xz, even when they are not tarballs. Files of unknown extensions are treated as uncompressed files and supported as well. * guix/packages.scm (patch-and-repack): Only add the compressor utility to the PATH when the file is compressed. Bind more inputs in the mlet, and use them for decompressing single files. Adjust the decompression and compression routines. [decompression-type]: Remove nested variable. * guix/build/utils.scm (compressor, tarball?): New procedures. Move %xz-parallel-args to the new 'compression helpers' section. * tests/packages.scm: Add tests. Add missing copyright year for Jan. * guix/build/gnu-build-system.scm (first-subdirectory): Return #f when no sub-directory was found. (unpack): Support more file types, including uncompressed plain files. Maxim Cournoyer 2019-06-14tests: Remove expensive and pointless test....This test had become too expensive since the introduction of the reduced bootstrap. * tests/builders.scm ("gnu-build"): Remove. (%bootstrap-inputs, %bootstrap-search-paths): Remove. Ludovic Courtès 2018-09-22bootstrap: %bootstrap-inputs: Wrap input lists into thunks....* gnu/packages/bootstrap.scm (%bootstrap-inputs): Change to procedure. Update users; prepares for Mes bootstrap. * gnu/packages/commencement.scm (%boot0-inputs, %boot1-inputs, %boot2-inputs, %boot3-inputs, %boot4-inputs, %boot5-inputs, %boot-6-inputs): Change to procedure. Update users. * tests/builders.scm (%bootstrap-inputs, %bootstrap-search-paths): Make a procedure, filter on package?. Update users. Jan Nieuwenhuizen 2018-09-04Switch to Guile-Gcrypt....This removes (guix hash) and (guix pk-crypto), which now live as part of Guile-Gcrypt (version 0.1.0.) * guix/gcrypt.scm, guix/hash.scm, guix/pk-crypto.scm, tests/hash.scm, tests/pk-crypto.scm: Remove. * configure.ac: Test for Guile-Gcrypt. Remove LIBGCRYPT and LIBGCRYPT_LIBDIR assignments. * m4/guix.m4 (GUIX_ASSERT_LIBGCRYPT_USABLE): Remove. * README: Add Guile-Gcrypt to the dependencies; move libgcrypt as "required unless --disable-daemon". * doc/guix.texi (Requirements): Likewise. * gnu/packages/bash.scm, guix/derivations.scm, guix/docker.scm, guix/git.scm, guix/http-client.scm, guix/import/cpan.scm, guix/import/cran.scm, guix/import/crate.scm, guix/import/elpa.scm, guix/import/gnu.scm, guix/import/hackage.scm, guix/import/texlive.scm, guix/import/utils.scm, guix/nar.scm, guix/pki.scm, guix/scripts/archive.scm, guix/scripts/authenticate.scm, guix/scripts/download.scm, guix/scripts/hash.scm, guix/scripts/pack.scm, guix/scripts/publish.scm, guix/scripts/refresh.scm, guix/scripts/substitute.scm, guix/store.scm, guix/store/deduplication.scm, guix/tests.scm, tests/base32.scm, tests/builders.scm, tests/challenge.scm, tests/cpan.scm, tests/crate.scm, tests/derivations.scm, tests/gem.scm, tests/nar.scm, tests/opam.scm, tests/pki.scm, tests/publish.scm, tests/pypi.scm, tests/store-deduplication.scm, tests/store.scm, tests/substitute.scm: Adjust imports. * gnu/system/vm.scm: Likewise. (guile-sqlite3&co): Rename to... (gcrypt-sqlite3&co): ... this. Add GUILE-GCRYPT. (expression->derivation-in-linux-vm)[config]: Remove. (iso9660-image)[config]: Remove. (qemu-image)[config]: Remove. (system-docker-image)[config]: Remove. * guix/scripts/pack.scm: Adjust imports. (guile-sqlite3&co): Rename to... (gcrypt-sqlite3&co): ... this. Add GUILE-GCRYPT. (self-contained-tarball)[build]: Call 'make-config.scm' without #:libgcrypt argument. (squashfs-image)[libgcrypt]: Remove. [build]: Call 'make-config.scm' without #:libgcrypt. (docker-image)[config, json]: Remove. [build]: Add GUILE-GCRYPT to the extensions Remove (guix config) from the imported modules. * guix/self.scm (specification->package): Remove "libgcrypt", add "guile-gcrypt". (compiled-guix): Remove #:libgcrypt. [guile-gcrypt]: New variable. [dependencies]: Add it. [*core-modules*]: Remove #:libgcrypt from 'make-config.scm' call. Add #:extensions. [*config*]: Remove #:libgcrypt from 'make-config.scm' call. (%dependency-variables): Remove %libgcrypt. (make-config.scm): Remove #:libgcrypt. * build-aux/build-self.scm (guile-gcrypt): New variable. (make-config.scm): Remove #:libgcrypt. (build-program)[fake-gcrypt-hash]: New variable. Add (gcrypt hash) to the imported modules. Adjust load path assignments. * gnu/packages/package-management.scm (guix)[propagated-inputs]: Add GUILE-GCRYPT. [arguments]: In 'wrap-program' phase, add GUILE-GCRYPT to the search path. Ludovic Courtès