aboutsummaryrefslogtreecommitdiff
Index: SDL_Pango-0.1.2/src/SDL_Pango.c
===================================================================
--- SDL_Pango-0.1.2.orig/src/SDL_Pango.c	2007-09-18 15:12:20.736253215 +0200
+++ SDL_Pango-0.1.2/src/SDL_Pango.c	2007-09-18 15:12:44.621614364 +0200
@@ -234,7 +234,7 @@
 //! non-zero if initialized
 static int IS_INITIALIZED = 0;
 
-#define DEFAULT_FONT_FAMILY "Sans"
+#define DEFAULT_FONT_FAMILY "sans-serif"
 #define DEFAULT_FONT_SIZE 12
 #define DEFAULT_DPI 96
 #define _MAKE_FONT_NAME(family, size) family " " #size
ce' procedure....* doc/guix.texi (Desktop Services): Replace with 'dbus-root-service-type'. Document dbus-configuration. * gnu/services/dbus.scm (dbus-service): Define with 'define-deprecated'. * gnu/services/desktop.scm (desktop-services-for-system): Replace with dbus-root-service-type. * gnu/system/install.scm (%installation-services): Ditto. * gnu/tests/base.scm (%avahi-os): Ditto. * gnu/tests/docker.scm (%docker-os): Ditto. * gnu/tests/lightdm.scm (minimal-desktop-services): Ditto. * gnu/tests/virtualization.scm (%libvirt-os): Ditto. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Bruno Victal 2023-03-03services: base: Deprecate 'udev-service' procedure....* doc/guix.texi (Base Services): Replace udev-service with udev-service-type. Document <udev-configuration>. Use @defun @-commands for udev-rules-service, udev-rule and file->udev-rule. * gnu/services/base.scm (udev-service): Deprecate procedure. * gnu/system/install.scm (%installation-services): Use udev-service-type. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Bruno Victal 2023-03-03services: base: Deprecate 'syslog-service' procedure....* doc/guix.texi (Base Services): Replace syslog-service with syslog-service-type. * gnu/services/base.scm (%default-syslog.conf): Place before <syslog-configuration>. (syslog-service-type): Set default value. (syslog-service): Deprecate procedure. (%base-services): Use syslog-service-type. * gnu/system/hurd.scm (%base-services/hurd): Ditto. * gnu/system/install.scm (%installation-services): Ditto. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Bruno Victal 2023-03-03services: base: Deprecate 'nscd-service' procedure....* doc/guix.texi (Application Setup): Compress @cindex entries. (Base Services): Compress @cindex entries. Delete %nscd-default-configuration. Replace 'nscd-service' with 'nscd-service-type'. * gnu/services/base.scm (%nscd-default-configuration): Deprecate variable. (nscd-service): Deprecate procedure. * gnu/system/install.scm (%installation-services): Use nscd-service-type. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Bruno Victal 2023-03-03services: base: Deprecate 'mingetty-service' procedure....* doc/guix.texi (Base Services): Replace mingetty-service with mingetty-service-type. * gnu/services/base.scm (mingetty-service): Deprecate procedure. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Bruno Victal 2023-03-03services: base: Deprecate 'login-service' procedure....* doc/guix.texi (Base Services): Replace with login-service-type. * gnu/services/base.scm (login-service): Deprecate procedure. * gnu/system/install.scm (%installation-services): Use login-service-type. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Bruno Victal 2022-12-19Merge branch 'version-1.4.0'Ludovic Courtès 2022-12-15install: Make sure uvesafb can be loaded....Fixes <https://issues.guix.gnu.org/60010>. Reported by pelzflorian (Florian Pelz) <pelzflorian@pelzflorian.de>. Previously, the 'modprobe' executable would try and fail to load the module from /lib/modules/*. Set 'LINUX_MODULE_DIRECTORY' to make sure 'modprobe' looks for the module in the right place. * gnu/system/install.scm (uvesafb-shepherd-service)[modprobe]: New variable. In 'start' method, invoke it instead of KMOD/bin/modprobe. Ludovic Courtès 2022-12-11install: Add lvm2-static system package....* gnu/system/install.scm (%installer-disk-utilities): Add lvm2-static. Tobias Geerinckx-Rice 2022-12-06install: Add missing e2fsprogs utility....* gnu/system/install.scm (%installer-disk-utilities): Add e2fsprogs. Reported-by: Adam Kandur <kefironpremise@gmail.com> Maxim Cournoyer 2022-12-06system: Rename and move %base-packages-disk-utilities....Rationale: It is only used in INSTALLATION-OS and doesn't make sense to be used in another context, given that file systems now automatically pull their dependencies since commit 45eac6cdf5c8d9d7b0c564b105c790d2d2007799 (services: Add file system utilities to profile). * gnu/system.scm (%base-packages-disk-utilities): Deprecate and rename to... * gnu/system/install.scm (%installer-disk-utilities): ... this. (installation-os) [packages]: Adjust accordingly. Maxim Cournoyer 2022-12-05install: Add missing e2fsprogs utility....* gnu/system/install.scm (%installer-disk-utilities): Add e2fsprogs. Reported-by: Adam Kandur <kefironpremise@gmail.com> Maxim Cournoyer 2022-12-05system: Rename and move %base-packages-disk-utilities....Rationale: It is only used in INSTALLATION-OS and doesn't make sense to be used in another context, given that file systems now automatically pull their dependencies since commit 45eac6cdf5c8d9d7b0c564b105c790d2d2007799 (services: Add file system utilities to profile). * gnu/system.scm (%base-packages-disk-utilities): Deprecate and rename to... * gnu/system/install.scm (%installer-disk-utilities): ... this. (installation-os) [packages]: Adjust accordingly. Maxim Cournoyer 2022-09-16system: install: Do not load amdgpu in the installer image....* gnu/system/install.scm (installation-os): Add amdgpu to modprobe.blacklist. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Antero Mejr 2022-08-09maint: Use a pretty version string in ISO and VM images....* gnu/system/examples/vm-image.tmpl: Use the 'GUIX_DISPLAYED_VERSION' environment variable in 'label'. * gnu/system/install.scm (%installation-os): Likewise. * Makefile.am (release): Set 'GUIX_DISPLAYED_VERSION'. Ludovic Courtès 2022-08-09system: install: Always use 'current-guix'....Fixes <https://issues.guix.gnu.org/53210>. Reported by Mathieu Othacehe <othacehe@gnu.org>. * gnu/system/install.scm (%installation-services): Set 'guix' to use (current-guix) in 'guix-configuration'. * gnu/system/examples/vm-image.tmpl: Likewise. * gnu/tests/install.scm (operating-system-with-current-guix): Remove. (run-install, installation-os-for-gui-tests): Remove its uses. * Makefile.am (release): Remove intermediate use of 'update-guix-package.scm' and subsequent 'git commit' invocation. Ludovic Courtès 2022-06-07gnu: install: Add uvesafb service only on targets that support v86d....Fixes <https://issues.guix.gnu.org/55806>. * gnu/system/install.scm (%installation-services): Refactor into a procedure, so that it can capture the system it's installing for. Conditionally add uvesafb-service-type based on whether v86d is supported by the target architecture. (installation-os)[services]: Use the %installation-service procedure. (uvesafb-shepherd-service): Remove %host-type checks. Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de> Josselin Poiret 2022-05-18services: Add more description fields....* gnu/services.scm (simple-service): Add 'description' field. * gnu/services/base.scm (udev-rules-service): Likewise. * gnu/system/install.scm (configuration-template-service-type): Likewise. * gnu/tests.scm (marionette-service-type): Likewise. Ludovic Courtès 2021-12-12services: Define '%loopback-static-networking'....* gnu/services/base.scm (%loopback-static-networking): New variable. (%base-services): Use it. * gnu/system/hurd.scm (%base-services/hurd): Use it. * gnu/system/install.scm (%installation-services): Use it. * doc/guix.texi (Networking Setup): Document it. Ludovic Courtès 2021-12-12services: static-networking: Change interface to mimic netlink....* gnu/services/base.scm (<static-networking>)[interface, ip, netmask] [gateway]: Remove. [addresses, links, routes]: New fields. [requirement]: Default to '(udev). (<network-address>, <network-link>, <network-route>): New record types. (ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove. (ipv6-address?, cidr->netmask, ip+netmask->cidr) (network-set-up/hurd, network-tear-down/hurd) (network-set-up/linux, network-tear-down/linux) (static-networking->hurd-pfinet-options): New procedures. (static-networking-shepherd-service): New procedure. (static-networking-shepherd-services): Rewrite in terms of the above. (static-networking-service): Deprecate. Adjust to new 'static-networking' API. (%base-services): Likewise. * gnu/system/install.scm (%installation-services): Likewise. * gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate 'loopback' from 'networking'. * gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove "servers/socket/2". * gnu/tests/networking.scm (run-openvswitch-test)["networking has started on ovs0"]: Check for 'networking instead of 'networking-ovs0, which is no longer provided. * doc/guix.texi (Networking Setup): Document the new interface. Remove documentation of 'static-networking-service'. (Virtualization Services): Change Ganeti example to use the new interface. Ludovic Courtès 2021-08-29Migrate to the new 'targets' field of bootloader-configuration....The old 'target' field is deprecated; adjust the sources to use the new 'targets' one instead. * doc/guix-cookbook.texi<target>: Replace by 'targets'. * gnu/bootloader/grub.scm: Likewise. * gnu/installer/parted.scm: Likewise. * gnu/machine/digital-ocean.scm: Likewise. * gnu/system/examples/asus-c201.tmpl: Likewise * gnu/system/examples/bare-bones.tmpl: Likewise * gnu/system/examples/bare-hurd.tmpl: Likewise * gnu/system/examples/beaglebone-black.tmpl: Likewise * gnu/system/examples/desktop.tmpl: Likewise * gnu/system/examples/docker-image.tmpl: Likewise * gnu/system/examples/lightweight-desktop.tmpl: Likewise * gnu/system/examples/vm-image.tmpl: Likewise * gnu/system/examples/yggdrasil.tmpl: Likewise * gnu/system/hurd.scm: Likewise * gnu/system/images/hurd.scm: Likewise * gnu/system/images/novena.scm: Likewise * gnu/system/images/pine64.scm: Likewise * gnu/system/images/pinebook-pro.scm: Likewise * gnu/system/images/rock64.scm: Likewise * gnu/system/install.scm: Likewise * gnu/system/vm.scm: Likewise * gnu/tests.scm: Likewise * gnu/tests/ganeti.scm: Likewise * gnu/tests/install.scm: Likewise * gnu/tests/nfs.scm: Likewise * gnu/tests/telephony.scm: Likewise * tests/boot-parameters.scm: Likewise * tests/system.scm: Likewise Maxim Cournoyer 2021-08-12system: install, hurd: Use 'setuid-programs'....This is a followup to a7ac19851baab3fbcc40c4b2cf5b00a6ac9cd2f3. * gnu/system/install.scm (installation-os)[setuid-programs]: Use 'setuid-program'. * gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'. Ludovic Courtès 2021-01-13services: shepherd: 'shepherd-service-type' requires documentation....* gnu/services/shepherd.scm (shepherd-service-type): Require a 'description' form. * gnu/services/base.scm (root-file-system-service-type) (rngd-service-type, host-name-service-type): (virtual-terminal-service-type, console-keymap-service-type) (syslog-service-type, swap-service-type) (kmscon-service-type): Add description. * gnu/services/networking.scm (dhcp-client-service-type): Likewise. * gnu/system/install.scm (cow-store-service-type): Likewise. * gnu/system/linux-container.scm (dummy-networking-service-type): Likewise. * gnu/system/mapped-devices.scm (device-mapping-service-type): Likewise. * tests/guix-system.sh: Likewise. Ludovic Courtès 2020-12-15store-copy: 'populate-store' can optionally deduplicate files....Until now deduplication was performed as an additional pass after copying files, which involve re-traversing all the files that had just been copied. * guix/store/deduplication.scm (copy-file/deduplicate): New procedure. * tests/store-deduplication.scm ("copy-file/deduplicate"): New test. * guix/build/store-copy.scm (populate-store): Add #:deduplicate? parameter and honor it. * tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f to 'populate-store'. * gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate? to 'populate-store'. Pass #:deduplicate? #f to 'register-closure'. * gnu/build/vm.scm (root-partition-initializer): Likewise. * gnu/build/install.scm (populate-single-profile-directory): Pass #:deduplicate? #f to 'populate-store'. * gnu/build/linux-initrd.scm (build-initrd): Likewise. * guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New procedure. [build]: Pass it as an argument to 'source-module-closure'. * guix/scripts/pack.scm (squashfs-image)[build]: Wrap in 'with-extensions'. * gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New procedure. [builder]: Pass it to 'source-module-closure'. * gnu/system/install.scm (cow-store-service-type)[import-module?]: New procedure. Pass it to 'source-module-closure'. Ludovic Courtès 2020-12-11install: Discover local substitute servers....* gnu/installer/substitutes.scm: New file. * gnu/installer/newt/substitutes.scm: New file. * gnu/local.mk (INSTALLER_MODULES): Add them. * po/guix/POTFILES.in: Add gnu/installer/newt/substitutes.scm. * gnu/installer/proxy.scm (with-silent-shepherd): Move to ... * gnu/installer/utils.scm: ... here. * gnu/installer/record.scm (<installer>)[substitutes-page]: New field. * gnu/installer/newt.scm (substitutes-page): New procedure, (newt-installer): register it. * gnu/installer.scm (installer-steps): Add "substitutes-page" step. * gnu/system/install.scm (%installation-services): Add avahi-service-type and enable substitute server discover in guix-service-type. [<name-service-switch>]: Set it to %mdns-host-lookup-nss. Mathieu Othacehe 2020-10-15install: Deduplicate packages with %base-package sets....* gnu/system.scm (%base-packages-interactive): Add nvi. * gnu/system/install.scm (installation-os)[packages]: Remove parted, gptfdisk, ddrescue, cryptsetup, mdadm, dosfstools, btrfs-progs, f2fs-tools, jfstools, openssh, wireless-tools, iw, wpa-supplicant-minimal, iproute, bash-completion, nvi. Add %base-packages-disk-utilities. Efraim Flashner 2020-10-11Revert "Revert "install: Pass "modprobe.blacklist=radeon".""...This reverts commit 73ddcab6075f60ef9b3cd72a35fbf7f5d622b6ef. Blacklisting has become necessary again on my AMD machines, else the installer screen stays black. Florian Pelz 2020-09-02install: Factorize cow-store procedure....Move the cow-store procedure from the service declaration in (gnu system install) to (gnu build install), so that it can be called from within a different context than Shepherd. * gnu/build/install.scm (mount-cow-store, unmount-cow-store): New procedures. * gnu/system/install.scm (make-cow-store): Remove it, (cow-store-service-type): adapt it accordingly. Mathieu Othacehe 2020-07-31file-system: Add efivarfs support....Tools such as efibootmgr rely on the deprecated /sys/firmware/efi/vars API as well as on the new /sys/firmware/efi/efivars API. The latter needs to be mounted. Reported by Keyhenge here: https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00274.html Here is the efivarfs documentation: https://www.kernel.org/doc/Documentation/filesystems/efivarfs.txt. * gnu/system/file-systems.scm (%efivars-file-system): New exported variable, (%base-file-systems): add it. * gnu/system/install.scm (%efivars-file-system): Add it. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Mathieu Othacehe