This patch disables the use of non-free code distributed with SDCC by
removing
- The "--disable-non-free" option to "configure" and the build logic
it controls;
- All references to the "device/non-free" source directory and the
corresponding "non-free" installation directory; and
- The "--use-non-free" and "--no-warn-non-free" compiler options and
references to them in build scripts and compiler output.
It also updates SDCC's documentation to reflect these changes and to
remove instructions that encourage the use of SDCC with non-free
software.
diff --git a/Makefile.common.in b/Makefile.common.in
index 8469079..174ed91 100644
--- a/Makefile.common.in
+++ b/Makefile.common.in
@@ -78,7 +78,6 @@ OPT_DISABLE_PACKIHX = @OPT_DISABLE_PACKIHX@
OPT_DISABLE_SDBINUTILS = @OPT_DISABLE_SDBINUTILS@
OPT_DISABLE_SDCPP = @OPT_DISABLE_SDCPP@
OPT_DISABLE_UCSIM = @OPT_DISABLE_UCSIM@
-OPT_DISABLE_NON_FREE = @OPT_DISABLE_NON_FREE@
SLIB = $(top_builddir)/support/util
diff --git a/Makefile.in b/Makefile.in
index 3287e30..69511e1 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -104,9 +104,6 @@ endif
ifeq ($(OPT_DISABLE_DEVICE_LIB), 0)
TARGETS += sdcc-device-lib
PKGS += device/lib
-ifeq ($(OPT_DISABLE_NON_FREE), 0)
-PKGS += device/non-free/lib
-endif
endif
ifeq ($(OPT_DISABLE_PACKIHX), 0)
@@ -127,9 +124,6 @@ endif
TARGETS += sdcc-libs sdcc-cc sdcc-device-inc sdcc-as sdcc-ld sdcc-scripts
PKGS += $(SDCC_LIBS) src device/include
-ifeq ($(OPT_DISABLE_NON_FREE), 0)
-PKGS += device/non-free/include
-endif
PKGS += $(SDCC_AS) sdas/linksrc $(SDCC_SCRIPTS)
PORTS = $(shell cat ports.build)
@@ -167,21 +161,12 @@ sdcc-sdbinutils:
sdcc-device-inc:
$(MAKE) -C device/include
-ifeq ($(OPT_DISABLE_NON_FREE), 0)
- $(MAKE) -C device/non-free/include
-endif
sdcc-device-lib: sdcc-cc sdcc-as sdcc-ld $(SDCC_BINUTILS)
$(MAKE) -C device/lib
-ifeq ($(OPT_DISABLE_NON_FREE), 0)
- $(MAKE) -C device/non-free/lib
-endif
sdcc-device-tini:
$(MAKE) -C device/include
-ifeq ($(OPT_DISABLE_NON_FREE), 0)
- $(MAKE) -C device/non-free/include
-endif
$(MAKE) -C device/lib model-ds390 model-ds400
# doc depends on latex and latex2html
diff --git a/configure b/configure
index b509c84..c7ce7fc 100755
--- a/configure
+++ b/configure
@@ -659,7 +659,6 @@ LATEX
LATEX2HTML
LYX
OPT_ENABLE_DOC
-OPT_DISABLE_NON_FREE
OPT_DISABLE_SDBINUTILS
OPT_DISABLE_SDCDB
OPT_DISABLE_SDCPP
@@ -693,10 +692,7 @@ OPT_DISABLE_Z80
OPT_DISABLE_MCS51
SVN_REVISION
GIT_REVISION
-non_free_lib_dir_suffix
lib_dir_suffix
-non_free_include_dir_suffix
-non_free_inclib_dir_suffix
include_dir_suffix
inclib_dir_suffix
LIB_TYPE
@@ -828,7 +824,6 @@ enable_packihx
enable_sdcpp
enable_sdcdb
enable_sdbinutils
-enable_non_free
enable_doc
enable_libgc
'
@@ -849,10 +844,7 @@ sdccconf_h_dir_separator
LIB_TYPE
inclib_dir_suffix
include_dir_suffix
-non_free_inclib_dir_suffix
-non_free_include_dir_suffix
lib_dir_suffix
-non_free_lib_dir_suffix
docdir'
ac_subdirs_all='support/cpp
support/packihx
@@ -860,9 +852,7 @@ sim/ucsim
debugger/mcs51
support/sdbinutils
device/lib/pic14
-device/non-free/lib/pic14
-device/lib/pic16
-device/non-free/lib/pic16'
+device/lib/pic16'
# Initialize some variables set by options.
ac_init_help=
@@ -1517,7 +1507,6 @@ Optional Features:
--disable-sdcpp Disables building sdcpp
--disable-sdcdb Disables building sdcdb
--disable-sdbinutils Disables configuring and building of sdbinutils
- --disable-non-free Disables non-free runtime library parts
--enable-doc Enables building the documentation
--enable-libgc Use the Bohem memory allocator. Lower runtime
footprint.
@@ -1551,16 +1540,8 @@ Some influential environment variables:
appended to datadir to define SDCC's include/lib directory
include_dir_suffix
appended to datadir to define SDCC's include directory
- non_free_inclib_dir_suffix
- appended to datadir to define SDCC's non-free include/lib
- directory
- non_free_include_dir_suffix
- appended to datadir to define SDCC's non-free include directory
lib_dir_suffix
appended to datadir to define SDCC's library root directory
- non_free_lib_dir_suffix
- appended to datadir to define SDCC's non-free library root
- directory
docdir documentation installation directory
Use these variables to override the choices made by `configure' or to help
@@ -7869,19 +7850,6 @@ if test "${include_dir_suffix}" = ""; then
include_dir_suffix="${inclib_dir_suffix}/include"
fi
-
-if test "${non_free_inclib_dir_suffix}" = ""; then
- non_free_inclib_dir_suffix="sdcc/non-free"
-fi
-
-# non_free_include_dir_suffix:
-# *nix default: "sdcc/non-free/include"
-
-
-if test "${non_free_include_dir_suffix}" = ""; then
- non_free_include_dir_suffix="${non_free_inclib_dir_suffix}/include"
-fi
-
# lib_dir_suffix:
# *nix default: "sdcc/lib"
@@ -7889,13 +7857,6 @@ if test "${lib_dir_suffix}" = ""; then
lib_dir_suffix="${inclib_dir_suffix}/lib"
fi
-# non_free_lib_dir_suffix:
-# *nix default: "sdcc/non-free/lib"
-
-if test "${non_free_lib_dir_suffix}" = ""; then
- non_free_lib_dir_suffix="${non_free_inclib_dir_suffix}/lib"
-fi
-
# docdir:
# *nix default: "${datadir}/sdcc/doc"
@@ -8048,22 +8009,6 @@ esac
printf "%s\n" "#define INCLUDE_DIR_SUFFIX DIR_SEPARATOR_STRING \"${norm_inc_dir_suffix}\"" >>confdefs.h
-norm_non_free_inc_dir_suffix=${non_free_include_dir_suffix}
-case ":$norm_non_free_inc_dir_suffix:" in
- ::) norm_non_free_inc_dir_suffix='.' ;;
- :*[\\/]:) norm_non_free_inc_dir_suffix=`echo "$norm_non_free_inc_dir_suffix" | sed 's,[\\/]*$,,'` ;;
- :*:) ;;
-esac
-case $sdccconf_h_dir_separator in
-
- *\\*) norm_non_free_inc_dir_suffix=`echo "$norm_non_free_inc_dir_suffix" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g
- s,^[\\/],\\\\\\\\,'` ;;
-
- *) norm_non_free_inc_dir_suffix=`echo "$norm_non_free_inc_dir_suffix" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;;
-esac
-
-printf "%s\n" "#define NON_FREE_INCLUDE_DIR_SUFFIX DIR_SEPARATOR_STRING \"${norm_non_free_inc_dir_suffix}\"" >>confdefs.h
-
norm_lib_dir_suffix=${lib_dir_suffix}
case ":$norm_lib_dir_suffix:" in
@@ -8081,22 +8026,6 @@ esac
printf "%s\n" "#define LIB_DIR_SUFFIX DIR_SEPARATOR_STRING \"${norm_lib_dir_suffix}\"" >>confdefs.h
-norm_non_free_lib_dir_suffix=${non_free_lib_dir_suffix}
-case ":$norm_non_free_lib_dir_suffix:" in
- ::) norm_non_free_lib_dir_suffix='.' ;;
- :*[\\/]:) norm_non_free_lib_dir_suffix=`echo "$norm_non_free_lib_dir_suffix" | sed 's,[\\/]*$,,'` ;;
- :*:) ;;
-esac
-case $sdccconf_h_dir_separator in
-
- *\\*) norm_non_free_lib_dir_suffix=`echo "$norm_non_free_lib_dir_suffix" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g
- s,^[\\/],\\\\\\\\,'` ;;
-
- *) norm_non_free_lib_dir_suffix=`echo "$norm_non_free_lib_dir_suffix" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;;
-esac
-
-printf "%s\n" "#define NON_FREE_LIB_DIR_SUFFIX DIR_SEPARATOR_STRING \"${norm_non_free_lib_dir_suffix}\"" >>confdefs.h
-
# relative paths
for _lcl_i in expanded_bindir:expanded_datadir:bin2data_dir; do
@@ -9237,27 +9166,6 @@ printf "%s\n" "#define OPT_DISABLE_SDBINUTILS $OPT_DISABLE_SDBINUTILS" >>confdef
- # Check whether --enable-non-free was given.
-if test ${enable_non_free+y}
-then :
- enableval=$enable_non_free;
-fi
-
-
- arg1=`echo non-free | sed s/-/_/`
-
- if test "`eval echo \\$enable_$arg1`" = "no"; then
- OPT_DISABLE_NON_FREE=1
- else
- OPT_DISABLE_NON_FREE=0
- fi
-
-
-printf "%s\n" "#define OPT_DISABLE_NON_FREE $OPT_DISABLE_NON_FREE" >>confdefs.h
-
-
-
-
# Check whether --enable-doc was given.
if test ${enable_doc+y}
@@ -9685,20 +9593,12 @@ if test $OPT_DISABLE_PIC14 = 0; then
test $OPT_DISABLE_DEVICE_LIB = 0 && subdirs="$subdirs device/lib/pic14"
-fi
-if test $OPT_DISABLE_PIC14 = 0 && test $OPT_DISABLE_NON_FREE = 0; then
- test $OPT_DISABLE_DEVICE_LIB = 0 && subdirs="$subdirs device/non-free/lib/pic14"
-
fi
if test $OPT_DISABLE_PIC16 = 0; then
ac_config_files="$ac_config_files src/pic16/Makefile"
test $OPT_DISABLE_DEVICE_LIB = 0 && subdirs="$subdirs device/lib/pic16"
-fi
-if test $OPT_DISABLE_PIC16 = 0 && test $OPT_DISABLE_NON_FREE = 0; then
- test $OPT_DISABLE_DEVICE_LIB = 0 && subdirs="$subdirs device/non-free/lib/pic16"
-
fi
if test $OPT_DISABLE_Z80 = 0 || test $OPT_DISABLE_Z180 = 0 || test $OPT_DISABLE_R2K = 0 || test $OPT_DISABLE_R2KA = 0 || test $OPT_DISABLE_R3KA = 0 || test $OPT_DISABLE_SM83 = 0 || test $OPT_DISABLE_TLCS90 = 0 || test $OPT_DISABLE_EZ80_Z80 = 0 || test $OPT_DISABLE_Z80N = 0 || test $OPT_DISABLE_R800 = 0; then
@@ -9775,8 +9675,6 @@ fi
test $OPT_DISABLE_DEVICE_LIB = 0 && ac_config_files="$ac_config_files device/lib/Makefile"
-test $OPT_DISABLE_DEVICE_LIB = 0 && test $OPT_DISABLE_NON_FREE = 0 && ac_config_files="$ac_config_files device/non-free/lib/Makefile"
-
ac_config_files="$ac_config_files main.mk:main_in.mk bin/Makefile src/Makefile device/include/Makefile sdas/linksrc/Makefile support/makebin/Makefile support/regression/Makefile support/regression/cases/Makefile support/valdiag/Makefile support/scripts/Makefile support/regression/ports/host/spec.mk:support/regression/ports/host/spec.mk.in Makefile Makefile.common:Makefile.common.in"
@@ -9792,10 +9690,6 @@ ac_config_files="$ac_config_files bin/sdranlib"
ac_config_files="$ac_config_files bin/sdobjcopy"
-if test $OPT_DISABLE_NON_FREE = 0; then
- ac_config_files="$ac_config_files device/non-free/include/Makefile"
-
-fi
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
@@ -10538,7 +10432,6 @@ do
"device/lib/pdk15-stack-auto/Makefile") CONFIG_FILES="$CONFIG_FILES device/lib/pdk15-stack-auto/Makefile" ;;
"sdas/aspdk16/Makefile") CONFIG_FILES="$CONFIG_FILES sdas/aspdk16/Makefile" ;;
"device/lib/Makefile") CONFIG_FILES="$CONFIG_FILES device/lib/Makefile" ;;
- "device/non-free/lib/Makefile") CONFIG_FILES="$CONFIG_FILES device/non-free/lib/Makefile" ;;
"main.mk") CONFIG_FILES="$CONFIG_FILES main.mk:main_in.mk" ;;
"bin/Makefile") CONFIG_FILES="$CONFIG_FILES bin/Makefile" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
@@ -10558,7 +10451,6 @@ do
"bin/sdnm") CONFIG_FILES="$CONFIG_FILES bin/sdnm" ;;
"bin/sdranlib") CONFIG_FILES="$CONFIG_FILES bin/sdranlib" ;;
"bin/sdobjcopy") CONFIG_FILES="$CONFIG_FILES bin/sdobjcopy" ;;
- "device/non-free/include/Makefile") CONFIG_FILES="$CONFIG_FILES device/non-free/include/Makefile" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
@@ -11375,54 +11267,6 @@ esac
incPath3=`echo "$incPath3" | sed 's,\\\\\\\\,\\\\,g'`
-nonFreeIncPath1=`echo "/${prefix2data_dir}/${norm_non_free_inc_dir_suffix}" | sed 's,/\./,/,g'`
-case ":$nonFreeIncPath1:" in
- ::) nonFreeIncPath1='.' ;;
- :*[\\/]:) nonFreeIncPath1=`echo "$nonFreeIncPath1" | sed 's,[\\/]*$,,'` ;;
- :*:) ;;
-esac
-case $dirch in
-
- *\\*) nonFreeIncPath1=`echo "$nonFreeIncPath1" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g
- s,^[\\/],\\\\\\\\,'` ;;
-
- *) nonFreeIncPath1=`echo "$nonFreeIncPath1" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;;
-esac
-nonFreeIncPath1=`echo "$nonFreeIncPath1" | sed 's,\\\\\\\\,\\\\,g'`
-
-
-nonFreeIncPath2=`echo "/${bin2data_dir}/${norm_non_free_inc_dir_suffix}" | sed 's,/\./,/,g'`
-case ":$nonFreeIncPath2:" in
- ::) nonFreeIncPath2='.' ;;
- :*[\\/]:) nonFreeIncPath2=`echo "$nonFreeIncPath2" | sed 's,[\\/]*$,,'` ;;
- :*:) ;;
-esac
-case $dirch in
-
- *\\*) nonFreeIncPath2=`echo "$nonFreeIncPath2" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g
- s,^[\\/],\\\\\\\\,'` ;;
-
- *) nonFreeIncPath2=`echo "$nonFreeIncPath2" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;;
-esac
-nonFreeIncPath2=`echo "$nonFreeIncPath2" | sed 's,\\\\\\\\,\\\\,g'`
-
-
-nonFreeIncPath3=`echo "${expanded_datadir}/${norm_non_free_inc_dir_suffix}" | sed 's,/\./,/,g'`
-case ":$nonFreeIncPath3:" in
- ::) nonFreeIncPath3='.' ;;
- :*[\\/]:) nonFreeIncPath3=`echo "$nonFreeIncPath3" | sed 's,[\\/]*$,,'` ;;
- :*:) ;;
-esac
-case $dirch in
-
- *\\*) nonFreeIncPath3=`echo "$nonFreeIncPath3" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g
- s,^[\\/],\\\\\\\\,'` ;;
-
- *) nonFreeIncPath3=`echo "$nonFreeIncPath3" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;;
-esac
-nonFreeIncPath3=`echo "$nonFreeIncPath3" | sed 's,\\\\\\\\,\\\\,g'`
-
-
libPath1=`echo "/${prefix2data_dir}/${norm_lib_dir_suffix}" | sed 's,/\./,/,g'`
case ":$libPath1:" in
@@ -11472,54 +11316,6 @@ esac
libPath3=`echo "$libPath3" | sed 's,\\\\\\\\,\\\\,g'`
-nonFreeLibPath1=`echo "/${prefix2data_dir}/${norm_non_free_lib_dir_suffix}" | sed 's,/\./,/,g'`
-case ":$nonFreeLibPath1:" in
- ::) nonFreeLibPath1='.' ;;
- :*[\\/]:) nonFreeLibPath1=`echo "$nonFreeLibPath1" | sed 's,[\\/]*$,,'` ;;
- :*:) ;;
-esac
-case $dirch in
-
- *\\*) nonFreeLibPath1=`echo "$nonFreeLibPath1" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g
- s,^[\\/],\\\\\\\\,'` ;;
-
- *) nonFreeLibPath1=`echo "$nonFreeLibPath1" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;;
-esac
-nonFreeLibPath1=`echo "$nonFreeLibPath1" | sed 's,\\\\\\\\,\\\\,g'`
-
-
-nonFreeLibPath2=`echo "/${bin2data_dir}/${norm_non_free_lib_dir_suffix}" | sed 's,/\./,/,g'`
-case ":$nonFreeLibPath2:" in
- ::) nonFreeLibPath2='.' ;;
- :*[\\/]:) nonFreeLibPath2=`echo "$nonFreeLibPath2" | sed 's,[\\/]*$,,'` ;;
- :*:) ;;
-esac
-case $dirch in
-
- *\\*) nonFreeLibPath2=`echo "$nonFreeLibPath2" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g
- s,^[\\/],\\\\\\\\,'` ;;
-
- *) nonFreeLibPath2=`echo "$nonFreeLibPath2" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;;
-esac
-nonFreeLibPath2=`echo "$nonFreeLibPath2" | sed 's,\\\\\\\\,\\\\,g'`
-
-
-nonFreeLibPath3=`echo "${expanded_datadir}/${norm_non_free_lib_dir_suffix}" | sed 's,/\./,/,g'`
-case ":$nonFreeLibPath3:" in
- ::) nonFreeLibPath3='.' ;;
- :*[\\/]:) nonFreeLibPath3=`echo "$nonFreeLibPath3" | sed 's,[\\/]*$,,'` ;;
- :*:) ;;
-esac
-case $dirch in
-
- *\\*) nonFreeLibPath3=`echo "$nonFreeLibPath3" | sed 's,\(.\)[\\/][\\/]*,\1\\\\\\\\,g
- s,^[\\/],\\\\\\\\,'` ;;
-
- *) nonFreeLibPath3=`echo "$nonFreeLibPath3" | sed 's,\(.\)[\\/][\\/]*,\1/,g'` ;;
-esac
-nonFreeLibPath3=`echo "$nonFreeLibPath3" | sed 's,\\\\\\\\,\\\\,g'`
-
-
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result:
sdcc ${VERSION} is now configured for
@@ -11562,7 +11358,6 @@ sdcc ${VERSION} is now configured for
mos6502 ${enable_mos6502_port}
mos65c02 ${enable_mos65c02_port}
- Disable non-free lib: ${OPT_DISABLE_NON_FREE}
Disable packihx: ${OPT_DISABLE_PACKIHX}
Disable ucsim: ${OPT_DISABLE_UCSIM}
Disable device lib: ${OPT_DISABLE_DEVICE_LIB}
@@ -11577,9 +11372,6 @@ sdcc ${VERSION} is now configured for
include/library files: ${datadir}/${inclib_dir_suffix}
include files: ${datadir}/${include_dir_suffix}
library files: ${datadir}/${lib_dir_suffix}
- non-free files: ${datadir}/${non_free_inclib_dir_suffix}
- non-free include files: ${datadir}/${non_free_include_dir_suffix}
- non-free library files: ${datadir}/${non_free_lib_dir_suffix}
documentation: ${docdir}
prefix: ${prefix}
@@ -11591,15 +11383,9 @@ sdcc ${VERSION} is now configured for
include files: ${incPath1}
path(argv[0])${incPath2}
${incPath3}
- ${nonFreeIncPath1}
- path(argv[0])${nonFreeIncPath2}
- ${nonFreeIncPath3}
library files: \$SDCC_HOME${libPath1}${dirch}<model>
path(argv[0])${libPath2}${dirch}<model>
${libPath3}${dirch}<model>
- \$SDCC_HOME${nonFreeLibPath1}${dirch}<model>
- path(argv[0])${nonFreeLibPath2}${dirch}<model>
- ${nonFreeLibPath3}${dirch}<model>
" >&5
printf "%s\n" "
sdcc ${VERSION} is now configured for
@@ -11643,7 +11429,6 @@ sdcc ${VERSION} is now configured for
mos6502 ${enable_mos6502_port}
mos65c02 ${enable_mos65c02_port}
- Disable non-free lib: ${OPT_DISABLE_NON_FREE}
Disable packihx: ${OPT_DISABLE_PACKIHX}
Disable ucsim: ${OPT_DISABLE_UCSIM}
Disable device lib: ${OPT_DISABLE_DEVICE_LIB}
@@ -11658,9 +11443,6 @@ sdcc ${VERSION} is now configured for
include/library files: ${datadir}/${inclib_dir_suffix}
include files: ${datadir}/${include_dir_suffix}
library files: ${datadir}/${lib_dir_suffix}
- non-free files: ${datadir}/${non_free_inclib_dir_suffix}
- non-free include files: ${datadir}/${non_free_include_dir_suffix}
- non-free library files: ${datadir}/${non_free_lib_dir_suffix}
documentation: ${docdir}
prefix: ${prefix}
@@ -11672,15 +11454,9 @@ sdcc ${VERSION} is now configured for
include files: ${incPath1}
path(argv[0])${incPath2}
${incPath3}
- ${nonFreeIncPath1}
- path(argv[0])${nonFreeIncPath2}
- ${nonFreeIncPath3}
library files: \$SDCC_HOME${libPath1}${dirch}<model>
path(argv[0])${libPath2}${dirch}<model>
${libPath3}${dirch}<model>
- \$SDCC_HOME${nonFreeLibPath1}${dirch}<model>
- path(argv[0])${nonFreeLibPath2}${dirch}<model>
- ${nonFreeLibPath3}${dirch}<model>
" >&6; }
# End of configure/configure.in
diff --git a/configure.ac b/configure.ac
index adf5060..bd5a036 100644
--- a/configure.ac
+++ b/configure.ac
@@ -542,19 +542,6 @@ if test "${include_dir_suffix}" = ""; then
include_dir_suffix="${inclib_dir_suffix}/include"
fi
-AC_ARG_VAR([non_free_inclib_dir_suffix], [appended to datadir to define SDCC's non-free include/lib directory])
-if test "${non_free_inclib_dir_suffix}" = ""; then
- non_free_inclib_dir_suffix="sdcc/non-free"
-fi
-
-# non_free_include_dir_suffix:
-# *nix default: "sdcc/non-free/include"
-
-AC_ARG_VAR([non_free_include_dir_suffix], [appended to datadir to define SDCC's non-free include directory])
-if test "${non_free_include_dir_suffix}" = ""; then
- non_free_include_dir_suffix="${non_free_inclib_dir_suffix}/include"
-fi
-
# lib_dir_suffix:
# *nix default: "sdcc/lib"
AC_ARG_VAR([lib_dir_suffix], [appended to datadir to define SDCC's library root directory])
@@ -562,13 +549,6 @@ if test "${lib_dir_suffix}" = ""; then
lib_dir_suffix="${inclib_dir_suffix}/lib"
fi
-# non_free_lib_dir_suffix:
-# *nix default: "sdcc/non-free/lib"
-AC_ARG_VAR([non_free_lib_dir_suffix], [appended to datadir to define SDCC's non-free library root directory])
-if test "${non_free_lib_dir_suffix}" = ""; then
- non_free_lib_dir_suffix="${non_free_inclib_dir_suffix}/lib"
-fi
-
# docdir:
# *nix default: "${datadir}/sdcc/doc"
AC_ARG_VAR([docdir], [documentation installation directory])
@@ -609,19 +589,11 @@ norm_inc_dir_suffix=${include_dir_suffix}
adl_NORMALIZE_PATH([norm_inc_dir_suffix], [$sdccconf_h_dir_separator])
AC_DEFINE_UNQUOTED(INCLUDE_DIR_SUFFIX,
DIR_SEPARATOR_STRING "${norm_inc_dir_suffix}", [XXX])
-norm_non_free_inc_dir_suffix=${non_free_include_dir_suffix}
-adl_NORMALIZE_PATH([norm_non_free_inc_dir_suffix], [$sdccconf_h_dir_separator])
-AC_DEFINE_UNQUOTED(NON_FREE_INCLUDE_DIR_SUFFIX,
- DIR_SEPARATOR_STRING "${norm_non_free_inc_dir_suffix}", [XXX])
norm_lib_dir_suffix=${lib_dir_suffix}
adl_NORMALIZE_PATH([norm_lib_dir_suffix], [$sdccconf_h_dir_separator])
AC_DEFINE_UNQUOTED(LIB_DIR_SUFFIX,
DIR_SEPARATOR_STRING "${norm_lib_dir_suffix}", [XXX])
-norm_non_free_lib_dir_suffix=${non_free_lib_dir_suffix}
-adl_NORMALIZE_PATH([norm_non_free_lib_dir_suffix], [$sdccconf_h_dir_separator])
-AC_DEFINE_UNQUOTED(NON_FREE_LIB_DIR_SUFFIX,
- DIR_SEPARATOR_STRING "${norm_non_free_lib_dir_suffix}", [XXX])
# relative paths
adl_COMPUTE_RELATIVE_PATHS([expanded_bindir:expanded_datadir:bin2data_dir])
@@ -815,7 +787,6 @@ AC_DO_DISABLER(packihx, PACKIHX, [Disables building packihx])
AC_DO_DISABLER(sdcpp, SDCPP, [Disables building sdcpp])
AC_DO_DISABLER(sdcdb, SDCDB, [Disables building sdcdb])
AC_DO_DISABLER(sdbinutils, SDBINUTILS, [Disables configuring and building of sdbinutils])
-AC_DO_DISABLER(non-free, NON_FREE, [Disables non-free runtime library parts])
AC_DO_ENABLER(doc, DOC, [Enables building the documentation])
AC_CHECK_PROG([LYX], [lyx], [lyx], [:])
@@ -895,16 +866,10 @@ if test $OPT_DISABLE_PIC14 = 0; then
AC_CONFIG_FILES(src/pic14/Makefile)
test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_SUBDIRS(device/lib/pic14)
fi
-if test $OPT_DISABLE_PIC14 = 0 && test $OPT_DISABLE_NON_FREE = 0; then
- test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_SUBDIRS(device/non-free/lib/pic14)
-fi
if test $OPT_DISABLE_PIC16 = 0; then
AC_CONFIG_FILES(src/pic16/Makefile)
test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_SUBDIRS(device/lib/pic16)
fi
-if test $OPT_DISABLE_PIC16 = 0 && test $OPT_DISABLE_NON_FREE = 0; then
- test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_SUBDIRS(device/non-free/lib/pic16)
-fi
if test $OPT_DISABLE_Z80 = 0 || test $OPT_DISABLE_Z180 = 0 || test $OPT_DISABLE_R2K = 0 || test $OPT_DISABLE_R2KA = 0 || test $OPT_DISABLE_R3KA = 0 || test $OPT_DISABLE_SM83 = 0 || test $OPT_DISABLE_TLCS90 = 0 || test $OPT_DISABLE_EZ80_Z80 = 0 || test $OPT_DISABLE_Z80N = 0 || test $OPT_DISABLE_R800 = 0; then
AC_CONFIG_FILES([src/z80/Makefile])
@@ -969,7 +934,6 @@ fi
test $OPT_DISABLE_DEVICE_LIB = 0 && AC_CONFIG_FILES([device/lib/Makefile])
-test $OPT_DISABLE_DEVICE_LIB = 0 && test $OPT_DISABLE_NON_FREE = 0 && AC_CONFIG_FILES([device/non-free/lib/Makefile])
AC_CONFIG_FILES([main.mk:main_in.mk
bin/Makefile
@@ -991,9 +955,6 @@ AC_CONFIG_FILES([bin/sdar], [chmod +x bin/sdar])
AC_CONFIG_FILES([bin/sdnm], [chmod +x bin/sdnm])
AC_CONFIG_FILES([bin/sdranlib], [chmod +x bin/sdranlib])
AC_CONFIG_FILES([bin/sdobjcopy], [chmod +x bin/sdobjcopy])
-if test $OPT_DISABLE_NON_FREE = 0; then
- AC_CONFIG_FILES([device/non-free/include/Makefile])
-fi
AC_OUTPUT
# I found no better place
@@ -1011,16 +972,10 @@ adl_NORMALIZE_PATH_MSG(/${prefix2bin_dir}, [binPath], [
adl_NORMALIZE_PATH_MSG(/${prefix2data_dir}/${norm_inc_dir_suffix}, [incPath1], [$dirch])
adl_NORMALIZE_PATH_MSG(/${bin2data_dir}/${norm_inc_dir_suffix}, [incPath2], [$dirch])
adl_NORMALIZE_PATH_MSG(${expanded_datadir}/${norm_inc_dir_suffix}, [incPath3], [$dirch])
-adl_NORMALIZE_PATH_MSG(/${prefix2data_dir}/${norm_non_free_inc_dir_suffix}, [nonFreeIncPath1], [$dirch])
-adl_NORMALIZE_PATH_MSG(/${bin2data_dir}/${norm_non_free_inc_dir_suffix}, [nonFreeIncPath2], [$dirch])
-adl_NORMALIZE_PATH_MSG(${expanded_datadir}/${norm_non_free_inc_dir_suffix}, [nonFreeIncPath3], [$dirch])
adl_NORMALIZE_PATH_MSG(/${prefix2data_dir}/${norm_lib_dir_suffix}, [libPath1], [$dirch])
adl_NORMALIZE_PATH_MSG(/${bin2data_dir}/${norm_lib_dir_suffix}, [libPath2], [$dirch])
adl_NORMALIZE_PATH_MSG(${expanded_datadir}/${norm_lib_dir_suffix}, [libPath3], [$dirch])
-adl_NORMALIZE_PATH_MSG(/${prefix2data_dir}/${norm_non_free_lib_dir_suffix}, [nonFreeLibPath1], [$dirch])
-adl_NORMALIZE_PATH_MSG(/${bin2data_dir}/${norm_non_free_lib_dir_suffix}, [nonFreeLibPath2], [$dirch])
-adl_NORMALIZE_PATH_MSG(${expanded_datadir}/${norm_non_free_lib_dir_suffix}, [nonFreeLibPath3], [$dirch])
AC_MSG_RESULT([
sdcc ${VERSION} is now configured for
@@ -1064,7 +1019,6 @@ sdcc ${VERSION} is now configured for
mos6502 ${enable_mos6502_port}
mos65c02 ${enable_mos65c02_port}
- Disable non-free lib: ${OPT_DISABLE_NON_FREE}
Disable packihx: ${OPT_DISABLE_PACKIHX}
Disable ucsim: ${OPT_DISABLE_UCSIM}
Disable device lib: ${OPT_DISABLE_DEVICE_LIB}
@@ -1079,9 +1033,6 @@ sdcc ${VERSION} is now configured for
include/library files: ${datadir}/${inclib_dir_suffix}
include files: ${datadir}/${include_dir_suffix}
library files: ${datadir}/${lib_dir_suffix}
- non-free files: ${datadir}/${non_free_inclib_dir_suffix}
- non-free include files: ${datadir}/${non_free_include_dir_suffix}
- non-free library files: ${datadir}/${non_free_lib_dir_suffix}
documentation: ${docdir}
prefix: ${prefix}
@@ -1093,14 +1044,8 @@ sdcc ${VERSION} is now configured for
include files: ${incPath1}
path(argv[[0]])${incPath2}
${incPath3}
- ${nonFreeIncPath1}
- path(argv[[0]])${nonFreeIncPath2}
- ${nonFreeIncPath3}
library files: \$SDCC_HOME${libPath1}${dirch}<model>
path(argv[[0]])${libPath2}${dirch}<model>
${libPath3}${dirch}<model>
- \$SDCC_HOME${nonFreeLibPath1}${dirch}<model>
- path(argv[[0]])${nonFreeLibPath2}${dirch}<model>
- ${nonFreeLibPath3}${dirch}<model>
])
# End of configure/configure.in
diff --git a/device/lib/pic14/Makefile.common b/device/lib/pic14/Makefile.common
index 019fe0f..da3389d 100644
--- a/device/lib/pic14/Makefile.common
+++ b/device/lib/pic14/Makefile.common
@@ -68,14 +68,14 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR))
AM_CPPFLAGS =
AM_CPPFLAGS += -I.
AM_CPPFLAGS += -I$(top_srcdir)
-AM_CPPFLAGS += -I$(DEVICE_TOP_DIR)/include/pic14 -I$(DEVICE_TOP_DIR)/non-free/include/pic14 -I$(DEVICE_TOP_DIR)/include
+AM_CPPFLAGS += -I$(DEVICE_TOP_DIR)/include/pic14 -I$(DEVICE_TOP_DIR)/include
############################################################
# C compiler flags
############################################################
SDCC_FLAGS =
-SDCC_FLAGS += -mpic14 --less-pedantic --no-warn-non-free --i-code-in-asm --fverbose-asm
+SDCC_FLAGS += -mpic14 --less-pedantic --i-code-in-asm --fverbose-asm
SDCC_FLAGS += --std-c11
# extra flags for enhanced cores
@@ -113,7 +113,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO
AM_CCASFLAGS =
AM_CCASFLAGS += -p$(ARCH)
AM_CCASFLAGS += -I$(srcdir)
-AM_CCASFLAGS += -I$(DEVICE_TOP_DIR)/include/pic14 -I$(DEVICE_TOP_DIR)/non-free/include/pic14
+AM_CCASFLAGS += -I$(DEVICE_TOP_DIR)/include/pic14
############################################################
# Common actions
diff --git a/device/lib/pic14/Makefile.in b/device/lib/pic14/Makefile.in
index 2c1a5d1..5a2082c 100644
--- a/device/lib/pic14/Makefile.in
+++ b/device/lib/pic14/Makefile.in
@@ -338,13 +338,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR))
# C preprocessor flags
############################################################
AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \
-I$(DEVICE_TOP_DIR)/include
############################################################
# C compiler flags
############################################################
-SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \
+SDCC_FLAGS = -mpic14 --less-pedantic \
--i-code-in-asm --fverbose-asm --std-c11 $(am__append_4)
# extra flags for enhanced cores
@@ -369,8 +368,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO
############################################################
# Assembler flags
############################################################
-AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14
+AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14
# extensions generated by the build process
CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb
diff --git a/device/lib/pic14/libc/Makefile.in b/device/lib/pic14/libc/Makefile.in
index ccf2032..8b2ba48 100644
--- a/device/lib/pic14/libc/Makefile.in
+++ b/device/lib/pic14/libc/Makefile.in
@@ -880,13 +880,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR))
# C preprocessor flags
############################################################
AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \
-I$(DEVICE_TOP_DIR)/include
############################################################
# C compiler flags
############################################################
-SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \
+SDCC_FLAGS = -mpic14 --less-pedantic \
--i-code-in-asm --fverbose-asm --std-c11 $(am__append_9)
# extra flags for enhanced cores
@@ -911,8 +910,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO
############################################################
# Assembler flags
############################################################
-AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14
+AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14
# extensions generated by the build process
CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb
diff --git a/device/lib/pic14/libm/Makefile.in b/device/lib/pic14/libm/Makefile.in
index 47f83e9..599023a 100644
--- a/device/lib/pic14/libm/Makefile.in
+++ b/device/lib/pic14/libm/Makefile.in
@@ -513,13 +513,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR))
# C preprocessor flags
############################################################
AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \
-I$(DEVICE_TOP_DIR)/include
############################################################
# C compiler flags
############################################################
-SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \
+SDCC_FLAGS = -mpic14 --less-pedantic \
--i-code-in-asm --fverbose-asm --std-c11 $(am__append_9)
# extra flags for enhanced cores
@@ -544,8 +543,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO
############################################################
# Assembler flags
############################################################
-AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14
+AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14
# extensions generated by the build process
CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb
diff --git a/device/lib/pic14/libsdcc/enhanced-no-xinst/Makefile.in b/device/lib/pic14/libsdcc/enhanced-no-xinst/Makefile.in
index b74e455..0991bfa 100644
--- a/device/lib/pic14/libsdcc/enhanced-no-xinst/Makefile.in
+++ b/device/lib/pic14/libsdcc/enhanced-no-xinst/Makefile.in
@@ -520,13 +520,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR))
# C preprocessor flags
############################################################
AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \
-I$(DEVICE_TOP_DIR)/include
############################################################
# C compiler flags
############################################################
-SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \
+SDCC_FLAGS = -mpic14 --less-pedantic \
--i-code-in-asm --fverbose-asm --std-c11 $(am__append_5)
# extra flags for enhanced cores
@@ -551,8 +550,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO
############################################################
# Assembler flags
############################################################
-AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14
+AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14
# extensions generated by the build process
CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb
diff --git a/device/lib/pic14/libsdcc/enhanced/Makefile.in b/device/lib/pic14/libsdcc/enhanced/Makefile.in
index 0647cca..0e98e11 100644
--- a/device/lib/pic14/libsdcc/enhanced/Makefile.in
+++ b/device/lib/pic14/libsdcc/enhanced/Makefile.in
@@ -520,13 +520,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR))
# C preprocessor flags
############################################################
AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \
-I$(DEVICE_TOP_DIR)/include
############################################################
# C compiler flags
############################################################
-SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \
+SDCC_FLAGS = -mpic14 --less-pedantic \
--i-code-in-asm --fverbose-asm --std-c11 $(am__append_5)
# extra flags for enhanced cores
@@ -551,8 +550,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO
############################################################
# Assembler flags
############################################################
-AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14
+AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14
# extensions generated by the build process
CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb
diff --git a/device/lib/pic14/libsdcc/regular/Makefile.in b/device/lib/pic14/libsdcc/regular/Makefile.in
index 5936858..16786b4 100644
--- a/device/lib/pic14/libsdcc/regular/Makefile.in
+++ b/device/lib/pic14/libsdcc/regular/Makefile.in
@@ -513,13 +513,12 @@ GENERIC_SRC_DIR_ABS = $(abspath $(GENERIC_SRC_DIR))
# C preprocessor flags
############################################################
AM_CPPFLAGS = -I. -I$(top_srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14 \
-I$(DEVICE_TOP_DIR)/include
############################################################
# C compiler flags
############################################################
-SDCC_FLAGS = -mpic14 --less-pedantic --no-warn-non-free \
+SDCC_FLAGS = -mpic14 --less-pedantic \
--i-code-in-asm --fverbose-asm --std-c11 $(am__append_5)
# extra flags for enhanced cores
@@ -544,8 +543,7 @@ AM_CFLAGS_EOX = -p$(EARCH) $(SDCC_FLAGS) $(SDCC_FLAGS_ENHANCED) $(SDCC_FLAGS_NOO
############################################################
# Assembler flags
############################################################
-AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14 \
- -I$(DEVICE_TOP_DIR)/non-free/include/pic14
+AM_CCASFLAGS = -p$(ARCH) -I$(srcdir) -I$(DEVICE_TOP_DIR)/include/pic14
# extensions generated by the build process
CLEAN_EXTENSIONS = .asm .lst .sym .d .p .g .v .adb
diff --git a/device/lib/pic16/Makefile.common b/device/lib/pic16/Makefile.common
index 01ad950..62839b9 100644
--- a/device/lib/pic16/Makefile.common
+++ b/device/lib/pic16/Makefile.common
@@ -1,11 +1,10 @@
AM_CPPFLAGS =
AM_CPPFLAGS += -I.
-AM_CPPFLAGS += -I$(top_srcdir)/../../include/pic16 -I$(top_srcdir)/../../non-free/include/pic16
+AM_CPPFLAGS += -I$(top_srcdir)/../../include/pic16
AM_CFLAGS =
AM_CFLAGS += --std-c11
AM_CFLAGS += --asm="$(CCAS)"
-AM_CFLAGS += --no-warn-non-free
##AM_CFLAGS += -Wa,-q
AM_CFLAGS += --fomit-frame-pointer
@@ -31,7 +30,7 @@ AM_CFLAGS += --i-code-in-asm
AM_CFLAGS += @USE_FLOATS@
AM_CCASFLAGS =
-AM_CCASFLAGS += -I$(top_srcdir)/../../include/pic16 -I$(top_srcdir)/../../non-free/include/pic16
+AM_CCASFLAGS += -I$(top_srcdir)/../../include/pic16
AM_CCASFLAGS += -I$(srcdir)
clean-local:
diff --git a/device/lib/pic16/Makefile.in b/device/lib/pic16/Makefile.in
index b0b5dfd..cfa190d 100644
--- a/device/lib/pic16/Makefile.in
+++ b/device/lib/pic16/Makefile.in
@@ -87,10 +87,7 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = \
- $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \
- $(top_srcdir)/../../non-free/lib/pic16/processors.ac \
- $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
@@ -298,8 +295,7 @@ top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = debug libc libio libm libsdcc startup
-AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16
+AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16
#AM_CFLAGS += --no-optimize-goto
#AM_CFLAGS += --debug-ralloc
@@ -313,11 +309,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
#AM_CFLAGS += --noinduction
#AM_CFLAGS += --nojtbound
#AM_CFLAGS += --noloopreverse
-AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \
+AM_CFLAGS = --std-c11 --asm="$(CCAS)" \
--fomit-frame-pointer --obanksel=9 --denable-peeps \
--optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@
-AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir)
+AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir)
DISTCLEANFILES = a.cod a.hex ./.checkdevices/* pics.supported
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
diff --git a/device/lib/pic16/configure b/device/lib/pic16/configure
index 88da323..abfd874 100755
--- a/device/lib/pic16/configure
+++ b/device/lib/pic16/configure
@@ -3859,7 +3859,6 @@ fi
-LIBDEV="${srcdir}/../../non-free/lib/pic16/libdev"
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking devices supported by gputils" >&5
printf %s "checking devices supported by gputils... " >&6; }
GOOD_PICS="";
@@ -3870,20 +3869,6 @@ N_GOOD=0
N_BAD=0
mkdir -p ".checkdevices";
rm -f "$RESULT";
-for i in "${LIBDEV}/pic1"*.c; do
- p="${i##*pic}";
- p="${p%.c}";
- P=$(echo "$p" | tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ);
- printf " include \"p%s.inc\"\n END" "$p" > "${CHECK}.asm";
- if "$mCCAS" -p "$p" -o "${CHECK}.o" -c "${CHECK}.asm" >/dev/null 2>&1 && "$mLD" "${CHECK}.o" >/dev/null 2>&1; then
- GOOD_PICS="$GOOD_PICS $p";
- N_GOOD=`expr $N_GOOD + 1`;
- echo "$P" >> "$RESULT";
- else
- BAD_PICS="$BAD_PICS $p";
- N_BAD=`expr $N_BAD + 1`;
- fi;
-done;
{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $N_GOOD devices ($GOOD_PICS)" >&5
printf "%s\n" "$N_GOOD devices ($GOOD_PICS)" >&6; }
diff --git a/device/lib/pic16/configure.ac b/device/lib/pic16/configure.ac
index df811a5..4a49c25 100644
--- a/device/lib/pic16/configure.ac
+++ b/device/lib/pic16/configure.ac
@@ -69,10 +69,6 @@ AC_SUBST(OBJEXT, [o])
_AM_DEPENDENCIES(CC)
_AM_DEPENDENCIES(CCAS)
-LIBDEV="${srcdir}/../../non-free/lib/pic16/libdev"
-m4_include([../../non-free/lib/pic16/supported-devices.ac])
-m4_include([../../non-free/lib/pic16/processors.ac])
-
# Checks for libraries.
# Checks for header files.
diff --git a/device/lib/pic16/debug/Makefile.in b/device/lib/pic16/debug/Makefile.in
index db0d421..9e90d7a 100644
--- a/device/lib/pic16/debug/Makefile.in
+++ b/device/lib/pic16/debug/Makefile.in
@@ -88,10 +88,7 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = debug
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = \
- $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \
- $(top_srcdir)/../../non-free/lib/pic16/processors.ac \
- $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
@@ -293,8 +290,7 @@ top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
lib_LIBRARIES = libdebug.a
libdebug_a_SOURCES = gstack/gstack.c
-AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16
+AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16
#AM_CFLAGS += --no-optimize-goto
#AM_CFLAGS += --debug-ralloc
@@ -308,11 +304,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
#AM_CFLAGS += --noinduction
#AM_CFLAGS += --nojtbound
#AM_CFLAGS += --noloopreverse
-AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \
+AM_CFLAGS = --std-c11 --asm="$(CCAS)" \
--fomit-frame-pointer --obanksel=9 --denable-peeps \
--optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@
-AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir)
+AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir)
all: all-am
.SUFFIXES:
diff --git a/device/lib/pic16/libc/Makefile.in b/device/lib/pic16/libc/Makefile.in
index 74147d2..bed548b 100644
--- a/device/lib/pic16/libc/Makefile.in
+++ b/device/lib/pic16/libc/Makefile.in
@@ -88,10 +88,7 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = libc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = \
- $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \
- $(top_srcdir)/../../non-free/lib/pic16/processors.ac \
- $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
@@ -384,8 +381,7 @@ libc18f_a_SOURCES = ctype/iscntrl.c ctype/isdigit.c ctype/isgraph.c \
string/strpbrk.c string/strrchr.c string/strspn.c \
string/strstr.c string/strtok.c string/strupr.c \
utils/cnvfrac.S utils/cnvint.S utils/cvtdec.S
-AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16
+AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16
#AM_CFLAGS += --no-optimize-goto
#AM_CFLAGS += --debug-ralloc
@@ -399,11 +395,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
#AM_CFLAGS += --noinduction
#AM_CFLAGS += --nojtbound
#AM_CFLAGS += --noloopreverse
-AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \
+AM_CFLAGS = --std-c11 --asm="$(CCAS)" \
--fomit-frame-pointer --obanksel=9 --denable-peeps \
--optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@
-AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir)
+AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir)
all: all-am
.SUFFIXES:
diff --git a/device/lib/pic16/libio/Makefile.in b/device/lib/pic16/libio/Makefile.in
index f2b4ecc..13537a8 100644
--- a/device/lib/pic16/libio/Makefile.in
+++ b/device/lib/pic16/libio/Makefile.in
@@ -481,10 +481,7 @@ POST_UNINSTALL = :
@ENABLE_18LF8723_TRUE@am__append_393 = libio18lf8723.a
subdir = libio
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = \
- $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \
- $(top_srcdir)/../../non-free/lib/pic16/processors.ac \
- $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
@@ -15602,8 +15599,7 @@ libio18lf8722_a_SOURCES = dummy.c i2c/i2cack.c i2c/i2cclose.c \
libio18lf8722_a_CFLAGS = -p18lf8722 $(AM_CFLAGS)
libio18lf8723_a_SOURCES = dummy.c
libio18lf8723_a_CFLAGS = -p18lf8723 $(AM_CFLAGS)
-AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16
+AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16
#AM_CFLAGS += --no-optimize-goto
#AM_CFLAGS += --debug-ralloc
@@ -15617,11 +15613,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
#AM_CFLAGS += --noinduction
#AM_CFLAGS += --nojtbound
#AM_CFLAGS += --noloopreverse
-AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \
+AM_CFLAGS = --std-c11 --asm="$(CCAS)" \
--fomit-frame-pointer --obanksel=9 --denable-peeps \
--optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@
-AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir)
+AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir)
all: all-am
.SUFFIXES:
diff --git a/device/lib/pic16/libio/mkmk.sh b/device/lib/pic16/libio/mkmk.sh
index 211604e..e8896bf 100755
--- a/device/lib/pic16/libio/mkmk.sh
+++ b/device/lib/pic16/libio/mkmk.sh
@@ -17,40 +17,6 @@ lib_LIBRARIES =
HEREDOC
-for f in "../../../non-free/lib/pic16/libdev/pic1"*.c; do
- p="${f##*/pic}";
- p="${p%.c}";
- P=$(echo "$p" | tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ);
- echo "Generating for device >>${p}<<" >&2;
- cat <<HERE
-if ENABLE_$P
-lib_LIBRARIES += libio${p}.a
-endif ENABLE_$P
-libio${p}_a_SOURCES = dummy.c
-HERE
- sed -e 's/\s*\(#.*\)\{0,1\}$//' adc.ignore | grep -x "$p" > /dev/null 2>&1 && { echo "No adc." >&2 ; } || cat <<HERE
-libio${p}_a_SOURCES += adc/adcbusy.c adc/adcclose.c adc/adcconv.c
-libio${p}_a_SOURCES += adc/adcopen.c adc/adcread.c adc/adcsetch.c
-HERE
- sed -e 's/\s*\(#.*\)\{0,1\}$//' i2c.ignore | grep -x "$p" > /dev/null 2>&1 && { echo "No i2c." >&2 ; } || cat <<HERE
-libio${p}_a_SOURCES += i2c/i2cack.c i2c/i2cclose.c i2c/i2cdrdy.c
-libio${p}_a_SOURCES += i2c/i2cidle.c i2c/i2cnack.c i2c/i2copen.c
-libio${p}_a_SOURCES += i2c/i2creadc.c i2c/i2creads.c i2c/i2crestart.c
-libio${p}_a_SOURCES += i2c/i2cstart.c i2c/i2cstop.c i2c/i2cwritec.c
-libio${p}_a_SOURCES += i2c/i2cwrites.c
-HERE
- sed -e 's/\s*\(#.*\)\{0,1\}$//' usart.ignore | grep -x "$p" > /dev/null 2>&1 && { echo "No usart." >&2 ; } || cat <<HERE
-libio${p}_a_SOURCES += usart/ubaud.c usart/ubusy.c usart/uclose.c
-libio${p}_a_SOURCES += usart/udrdy.c usart/ugetc.c usart/ugets.c
-libio${p}_a_SOURCES += usart/uopen.c usart/uputc.c usart/uputs.c
-libio${p}_a_SOURCES += usart/usartd.c
-HERE
- cat <<HERE
-libio${p}_a_CFLAGS = -p${p} \$(AM_CFLAGS)
-
-HERE
-done
-
cat <<HEREDOC
include \$(top_srcdir)/Makefile.common
diff --git a/device/lib/pic16/libm/Makefile.in b/device/lib/pic16/libm/Makefile.in
index d08a59c..e01d8e2 100644
--- a/device/lib/pic16/libm/Makefile.in
+++ b/device/lib/pic16/libm/Makefile.in
@@ -88,10 +88,7 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = libm
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = \
- $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \
- $(top_srcdir)/../../non-free/lib/pic16/processors.ac \
- $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
@@ -314,8 +311,7 @@ libm18f_a_SOURCES = acosf.c asincosf.c asinf.c atan2f.c atanf.c \
frexpf.c isinf.c isnan.c ldexpf.c log10f.c logf.c modff.c \
powf.c sincosf.c sincoshf.c sinf.c sinhf.c sqrtf.c tancotf.c \
tanf.c tanhf.c
-AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16
+AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16
#AM_CFLAGS += --no-optimize-goto
#AM_CFLAGS += --debug-ralloc
@@ -329,11 +325,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
#AM_CFLAGS += --noinduction
#AM_CFLAGS += --nojtbound
#AM_CFLAGS += --noloopreverse
-AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \
+AM_CFLAGS = --std-c11 --asm="$(CCAS)" \
--fomit-frame-pointer --obanksel=9 --denable-peeps \
--optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@
-AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir)
+AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir)
all: all-am
.SUFFIXES:
diff --git a/device/lib/pic16/libsdcc/Makefile.in b/device/lib/pic16/libsdcc/Makefile.in
index afbf492..4f4a5e5 100644
--- a/device/lib/pic16/libsdcc/Makefile.in
+++ b/device/lib/pic16/libsdcc/Makefile.in
@@ -88,10 +88,7 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = libsdcc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = \
- $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \
- $(top_srcdir)/../../non-free/lib/pic16/processors.ac \
- $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
@@ -415,8 +412,7 @@ libsdcc_a_SOURCES = char/divschar.c char/divuchar.c char/modschar.c \
int/modsint.c int/moduint.c int/mulint.c long/divslong.c \
long/divulong.c long/modslong.c long/modulong.c long/mullong.c \
lregs/lrrest.c lregs/lrst.c stack/stack.S
-AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16
+AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16
#AM_CFLAGS += --no-optimize-goto
#AM_CFLAGS += --debug-ralloc
@@ -430,11 +426,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
#AM_CFLAGS += --noinduction
#AM_CFLAGS += --nojtbound
#AM_CFLAGS += --noloopreverse
-AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \
+AM_CFLAGS = --std-c11 --asm="$(CCAS)" \
--fomit-frame-pointer --obanksel=9 --denable-peeps \
--optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@
-AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir)
+AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir)
all: all-am
.SUFFIXES:
diff --git a/device/lib/pic16/startup/Makefile.in b/device/lib/pic16/startup/Makefile.in
index 5c2fce7..8d70807 100644
--- a/device/lib/pic16/startup/Makefile.in
+++ b/device/lib/pic16/startup/Makefile.in
@@ -89,10 +89,7 @@ PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = startup
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = \
- $(top_srcdir)/../../non-free/lib/pic16/supported-devices.ac \
- $(top_srcdir)/../../non-free/lib/pic16/processors.ac \
- $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
@@ -310,8 +307,7 @@ libcrt0iz_a_SOURCES = crt0iz.c
# Force installation of .o files into $libdir
crtdir = $(libdir)
crt_DATA = crt0.o crt0i.o crt0iz.o
-AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16
+AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16
#AM_CFLAGS += --no-optimize-goto
#AM_CFLAGS += --debug-ralloc
@@ -325,11 +321,10 @@ AM_CPPFLAGS = -I. -I$(top_srcdir)/../../include/pic16 \
#AM_CFLAGS += --noinduction
#AM_CFLAGS += --nojtbound
#AM_CFLAGS += --noloopreverse
-AM_CFLAGS = --std-c11 --asm="$(CCAS)" --no-warn-non-free \
+AM_CFLAGS = --std-c11 --asm="$(CCAS)" \
--fomit-frame-pointer --obanksel=9 --denable-peeps \
--optimize-cmp --optimize-df --i-code-in-asm @USE_FLOATS@
-AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 \
- -I$(top_srcdir)/../../non-free/include/pic16 -I$(srcdir)
+AM_CCASFLAGS = -I$(top_srcdir)/../../include/pic16 -I$(srcdir)
all: all-am
.SUFFIXES:
diff --git a/doc/INSTALL.txt b/doc/INSTALL.txt
index 8dfadb6..dd17528 100644
--- a/doc/INSTALL.txt
+++ b/doc/INSTALL.txt
@@ -18,9 +18,7 @@ To install:
This will install sdcc binaries into: /usr/local/bin/
header files into: /usr/local/share/sdcc/include/
-non-free header files into: /usr/local/share/sdcc/non-free/include/
library files into: /usr/local/share/sdcc/lib/
-non-free library files into: /usr/local/share/sdcc/non-free/lib/
and documentation into: /usr/local/share/sdcc/doc/
You can test the install by entering:
@@ -44,9 +42,7 @@ To install:
By default this will install sdcc binaries into: C:\Program Files\SDCC\bin\
header files into: C:\Program Files\SDCC\include\
-non-free header files into: C:\Program Files\SDCC\non-free\include\
library files into: C:\Program Files\SDCC\lib\
-non-free library files into: C:\Program Files\SDCC\non-free\lib\
and documentation into: C:\Program Files\SDCC\doc\
You can test the install by opening a DOS box and entering:
@@ -75,9 +71,7 @@ To install:
This will install sdcc binaries into: /Developer/sdcc/bin/
header files into: /Developer/sdcc/share/sdcc/include/
-non-free header files into: /Developer/sdcc/share/sdcc/non-free/include/
library files into: /Developer/sdcc/share/sdcc/lib/
-non-free library files into: /Developer/sdcc/share/sdcc/non-free/lib/
and documentation into: /Developer/sdcc/share/sdcc/doc/
You can test the install by entering:
diff --git a/doc/README.txt b/doc/README.txt
index e62177b..4d09afb 100644
--- a/doc/README.txt
+++ b/doc/README.txt
@@ -37,10 +37,9 @@ Exception are pic device libraries and header files which are derived
from Microchip header (.inc) and linker script (.lkr) files. Microchip
requires that "The header files should state that they are only to be
used with authentic Microchip devices" which makes them incompatible
-with the GPL. Pic device libraries and header files are located at
-non-free/lib and non-free/include directories respectively. Sdcc should
-be run with the --use-non-free command line option in order to include
-the potentially non-free header files and libraries.
+with the GPL. These non-free libraries and header files (and the build
+and run-time options that enable their use) are omitted in the SDCC
+package distributed with GNU Guix.
However: Many think that the Microchip requirement is not legally enforceable,
arguing that the header files only contain noncopyrightable facts.
diff --git a/doc/sdccman.lyx b/doc/sdccman.lyx
index efaf738..0ad1ba7 100644
--- a/doc/sdccman.lyx
+++ b/doc/sdccman.lyx
@@ -1151,54 +1151,9 @@ A possible exception are pic device libraries and header files which are
to be used with authentic Microchip devices" which makes them incompatible
with the GPL, if Microchip has any copyright in them (which might depend
on local copyright laws).
- Pic device libraries and header files are located at non-free/lib and non-free/
-include directories respectively.
- SDCC should be run with the
-\series bold
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--
-\series default
-use-non-free
-\series bold
-
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\end_layout
-
-\end_inset
-
-
-\series default
- command line option in order to include non-free header files and libraries.
-
+ These non-free libraries and header files (and the build and run-time options
+ that enable their use) are omitted in the SDCC package distributed with
+ GNU Guix.
\end_layout
\begin_layout Itemize
@@ -1261,23 +1216,6 @@ makebin:
zlib/libpng License
\end_layout
-\begin_layout Itemize
-pic libraries in device/non-free:
-\begin_inset Newline newline
-\end_inset
-
-Microchip Technology Inc.
-\begin_inset space \space{}
-\end_inset
-
-claims to have copyrights on this, and their term are non-free.
- However, a more common opinion is that Microchip Technology Inc.
-\begin_inset space \space{}
-\end_inset
-
-is just claiming a copyright on uncopyrightable facts.
-\end_layout
-
\end_deeper
\begin_layout Itemize
libraries:
@@ -3194,18 +3132,6 @@ include_dir_suffix environment variable, see table below
\end_inset
-\begin_inset space ~
-\end_inset
-
-non_free_include_dir_suffix environment variable, see table below
-\end_layout
-
-\begin_layout Labeling
-\labelwidthstring 00.00.0000
-\begin_inset space ~
-\end_inset
-
-
\begin_inset space ~
\end_inset
@@ -3218,22 +3144,6 @@ lib_dir_suffix environment variable, see table below
\end_inset
-\begin_inset space ~
-\end_inset
-
-
-\begin_inset space ~
-\end_inset
-
-non_free_lib_dir_suffix environment variable, see table below
-\end_layout
-
-\begin_layout Labeling
-\labelwidthstring 00.00.0000
-\begin_inset space ~
-\end_inset
-
-
\begin_inset space ~
\end_inset
@@ -3876,7 +3786,7 @@ These defaults are:
\begin_layout Standard
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="11" columns="3">
+<lyxtabular version="3" rows="9" columns="3">
<features tabularvalignment="middle">
<column alignment="block" valignment="top" width="0in">
<column alignment="block" valignment="top" width="0in">
@@ -4160,68 +4070,6 @@ sdcc/include
include
\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\emph on
-NON_FREE_INCLUDE_DIR_SUFFIX
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-sdcc/non-free/include
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-non-free/include
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\emph on
-LIB_DIR_SUFFIX
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-sdcc/lib
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-lib
-\end_layout
-
\end_inset
</cell>
</row>
@@ -4232,7 +4080,7 @@ lib
\begin_layout Plain Layout
\emph on
-NON_FREE_LIB_DIR_SUFFIX
+LIB_DIR_SUFFIX
\end_layout
\end_inset
@@ -4241,7 +4089,7 @@ NON_FREE_LIB_DIR_SUFFIX
\begin_inset Text
\begin_layout Plain Layout
-sdcc/non-free/lib
+sdcc/lib
\end_layout
\end_inset
@@ -4250,7 +4098,7 @@ sdcc/non-free/lib
\begin_inset Text
\begin_layout Plain Layout
-non-free/lib
+lib
\end_layout
\end_inset
@@ -4649,20 +4497,6 @@ include
\end_inset
-\backslash
-
-\begin_inset Newline newline
-\end_inset
-
-non_free_include_dir_suffix=
-\begin_inset Quotes srd
-\end_inset
-
-non-free/include
-\begin_inset Quotes srd
-\end_inset
-
-
\backslash
\begin_inset Newline newline
@@ -4677,20 +4511,6 @@ lib
\end_inset
-\backslash
-
-\begin_inset Newline newline
-\end_inset
-
-non_free_lib_dir_suffix=
-\begin_inset Quotes srd
-\end_inset
-
-non-free/lib
-\begin_inset Quotes srd
-\end_inset
-
-
\backslash
\begin_inset Newline newline
@@ -4871,20 +4691,6 @@ include
\end_inset
-\backslash
-
-\begin_inset Newline newline
-\end_inset
-
-non_free_include_dir_suffix=
-\begin_inset Quotes srd
-\end_inset
-
-non-free/include
-\begin_inset Quotes srd
-\end_inset
-
-
\backslash
\begin_inset Newline newline
@@ -4899,20 +4705,6 @@ lib
\end_inset
-\backslash
-
-\begin_inset Newline newline
-\end_inset
-
-non_free_lib_dir_suffix=
-\begin_inset Quotes srd
-\end_inset
-
-non-free/lib
-\begin_inset Quotes srd
-\end_inset
-
-
\backslash
\begin_inset Newline newline
@@ -5009,7 +4801,7 @@ Install paths
\begin_layout Standard
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="7" columns="4">
+<lyxtabular version="3" rows="5" columns="4">
<features tabularvalignment="middle">
<column alignment="left" valignment="top">
<column alignment="left" valignment="top" width="4.5cm">
@@ -5165,64 +4957,6 @@ include
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\begin_layout Plain Layout
-Non-free include files
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\emph on
-$DATADIR/non-free/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$INCLUDE_DIR_SUFFIX
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-/usr/local/share/
-\begin_inset Newline newline
-\end_inset
-
-sdcc/non-free/include
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\backslash
-sdcc
-\backslash
-non-free
-\backslash
-include
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
\begin_layout Plain Layout
Library file**
\end_layout
@@ -5272,64 +5006,6 @@ sdcc
lib
\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-Library file**
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\emph on
-$DATADIR/non-free/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$LIB_DIR_SUFFIX
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-/usr/local/share/
-\begin_inset Newline newline
-\end_inset
-
-sdcc/non-free/lib
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\backslash
-sdcc
-\backslash
-non-free
-\backslash
-lib
-\end_layout
-
\end_inset
</cell>
</row>
@@ -5652,7 +5328,7 @@ $PATH
\begin_layout Standard
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="9" columns="4">
+<lyxtabular version="3" rows="6" columns="4">
<features tabularvalignment="middle">
<column alignment="block" valignment="top" width="0.5cm">
<column alignment="block" valignment="top" width="4.8cm">
@@ -5930,203 +5606,13 @@ include
</cell>
</row>
<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
5
\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\emph on
-$DATADIR/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$INCLUDE_DIR_SUFFIX
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-/usr/local/share/
-\begin_inset Newline newline
-\end_inset
-
-sdcc/include
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-(not on Win32)
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-6
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-$SDCC_HOME/
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$PREFIX2DATA_DIR/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-non-free/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$INCLUDE_DIR_SUFFIX
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-$SDCC_HOME/share/
-\begin_inset Newline newline
-\end_inset
-
-sdcc/non-free/include
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-$SDCC_HOME
-\backslash
-non-free
-\backslash
-include
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-7
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-path(argv[0])/
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$BIN2DATADIR/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-non-free/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$INCLUDE_DIR_SUFFIX
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-path(argv[0])/../
-\begin_inset Newline newline
-\end_inset
-
-sdcc/non-free/include
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-path(argv[0])
-\backslash
-..
-\backslash
-non-free
-\backslash
-include
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-8
-\end_layout
-
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
@@ -6142,21 +5628,13 @@ $DATADIR/
\end_inset
-\emph on
-non-free/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
\emph on
$INCLUDE_DIR_SUFFIX
\end_layout
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
@@ -6164,7 +5642,7 @@ $INCLUDE_DIR_SUFFIX
\begin_inset Newline newline
\end_inset
-sdcc/non-free/include
+sdcc/include
\end_layout
\end_inset
@@ -6262,7 +5740,7 @@ model
\begin_layout Standard
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="10" columns="4">
+<lyxtabular version="3" rows="6" columns="4">
<features tabularvalignment="middle">
<column alignment="block" valignment="top" width="0.5cm">
<column alignment="block" valignment="top" width="4.5cm">
@@ -6542,7 +6020,7 @@ lib
</cell>
</row>
<row>
-<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
@@ -6551,7 +6029,7 @@ lib
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
@@ -6582,7 +6060,7 @@ $LIB_DIR_SUFFIX/
\end_inset
</cell>
-<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
@@ -6597,7 +6075,7 @@ lib/
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\begin_layout Plain Layout
@@ -6620,308 +6098,6 @@ lib
<model>
\end_layout
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-6
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\emph on
-$DATADIR/non-free/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$LIB_DIR_SUFFIX/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-<model>
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-/usr/local/share/sdcc/
-\begin_inset Newline newline
-\end_inset
-
-lib/
-\emph on
-<model>
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-(not on Win32)
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-7
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-$SDCC_HOME/
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$PREFIX2DATA_DIR/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-non-free/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$LIB_DIR_SUFFIX/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-<model>
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-$SDCC_HOME/share/sdcc/
-\begin_inset Newline newline
-\end_inset
-
-non-free/lib/
-\emph on
-<model>
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-$SDCC_HOME
-\backslash
-
-\begin_inset Newline newline
-\end_inset
-
-lib
-\backslash
-non-free
-\emph on
-
-\backslash
-<model>
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-8
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-path(argv[0])/
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$BIN2DATADIR/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-non-free/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$LIB_DIR_SUFFIX/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-<model>
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-path(argv[0])/../sdcc/
-\begin_inset Newline newline
-\end_inset
-
-non-free/lib/
-\emph on
-<model>
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-path(argv[0])
-\backslash
-..
-\backslash
-
-\begin_inset Newline newline
-\end_inset
-
-lib
-\backslash
-non-free
-\emph on
-
-\backslash
-<model>
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-9
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-
-\emph on
-$DATADIR/non-free/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-$LIB_DIR_SUFFIX/
-\emph default
-
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-<model>
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-/usr/local/share/sdcc/
-\begin_inset Newline newline
-\end_inset
-
-non-free/lib/
-\begin_inset Newline newline
-\end_inset
-
-
-\emph on
-<model>
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-(not on Win32)
-\end_layout
-
\end_inset
</cell>
</row>
@@ -9201,14 +8377,6 @@ In <installdir>/share/sdcc/include
the include files
\end_layout
-\begin_layout Standard
-In <installdir>/share/sdcc/non-free/include
-\end_layout
-
-\begin_layout Itemize
-the non-free include files
-\end_layout
-
\begin_layout Standard
In <installdir>/share/sdcc/lib
\end_layout
@@ -9217,14 +8385,6 @@ In <installdir>/share/sdcc/lib
the src and target subdirectories with the precompiled relocatables.
\end_layout
-\begin_layout Standard
-In <installdir>/share/sdcc/non-free/lib
-\end_layout
-
-\begin_layout Itemize
-the src and target subdirectories with the non-free precompiled relocatables.
-\end_layout
-
\begin_layout Standard
In <installdir>/share/sdcc/doc
\end_layout
@@ -16452,66 +15612,6 @@ splint
myprogram.c
\end_layout
-\begin_layout Labeling
-\labelwidthstring 00.00.0000
-
-\series bold
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\series default
-
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\end_layout
-
-\end_inset
-
-
-\begin_inset CommandInset label
-LatexCommand label
-name "lyx:--use-non-free"
-
-\end_inset
-
- Search / include non-free licensed libraries and header files, located
- under the non-free directory - see section
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "subsec:Search-Paths"
-
-\end_inset
-
-
-\end_layout
-
\begin_layout Subsection
Linker Options
\begin_inset Index idx
@@ -46758,66 +45858,9 @@ http://sourceforge.net/projects/gputils
Pic device specific header and c source files are automatically generated
from MPLAB include files, which are published by Microchip with a special
requirement that they are only to be used with authentic Microchip devices.
- This reqirement prevents to publish generated header and c source files
- under the GPL compatible license, so they are located in non-free directory
- (see section
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "subsec:Search-Paths"
-
-\end_inset
-
-).
- In order to include them in include and library search paths, the
-\series bold
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\end_layout
-
-\end_inset
-
-
-\series default
- command line option should be defined.
-\begin_inset Newline newline
-\end_inset
-
-
-\begin_inset Newline newline
-\end_inset
-
-NOTE: the compiled code, which use non-free pic device specific libraries,
- is not GPL compatible!
+ As this restriction is incompatible with the goal of software freedom,
+ header files and libraries generated from these files are not included
+ in the SDCC package distributed with Guix.
\begin_inset Newline newline
\end_inset
@@ -46871,7 +45914,7 @@ Makefile
\begin_inset space ~
\end_inset
-sdcc -V --use-non-free -mpic14 -p16f877 -c $<
+sdcc -V -mpic14 -p16f877 -c $<
\begin_inset Newline newline
\end_inset
@@ -46965,7 +46008,7 @@ Makefile
\begin_inset space ~
\end_inset
-sdcc -S -V --use-non-free -mpic14 -p16f877 $<
+sdcc -S -V -mpic14 -p16f877 $<
\begin_inset Newline newline
\end_inset
@@ -47247,47 +46290,6 @@ status collapsed
\begin_layout Plain Layout
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
-PIC14!Options!-
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\end_layout
-
-\end_inset
-
- make non-free device headers and libraries available in the compiler's
- search paths (implicit -I and -L options)
-\end_layout
-
-\begin_layout Description
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
\backslash
/
\end_layout
@@ -48160,47 +47162,6 @@ status collapsed
-all-callee-saves
\end_layout
-\begin_layout Description
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
-PIC16!Options!-
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\end_layout
-
-\end_inset
-
- Make non-free device headers and libraries available in the compiler's
- search paths (implicit -I and -L options).
-\end_layout
-
\begin_layout Subsection
Port Specific Options
\begin_inset Index idx
@@ -49477,188 +48438,6 @@ Linker
\end_inset
-\end_layout
-
-\begin_layout Standard
-If the
-\series bold
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\end_layout
-
-\end_inset
-
-
-\series default
- command line option is specified, non-free directories are searched:
-\begin_inset Newline newline
-\end_inset
-
-
-\begin_inset Separator latexpar
-\end_inset
-
-
-\end_layout
-
-\begin_layout Standard
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="4">
-<features tabularvalignment="middle">
-<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
-<column alignment="center" valignment="top">
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-Directory
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-Description
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-Target
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-Command prefix
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-PREFIX/sdcc/non-free/include/pic16
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-PIC16 specific non-free headers
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-Compiler
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
--I
-\end_layout
-
-\end_inset
-</cell>
-</row>
-<row>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-PREFIX/sdcc/non-free/lib/pic16
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-PIC16 specific non-free libraries
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
-Linker
-\end_layout
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\begin_layout Plain Layout
--L
-\end_layout
-
-\end_inset
-</cell>
-</row>
-</lyxtabular>
-
-\end_inset
-
-
\end_layout
\begin_layout Subsection
@@ -50354,66 +49133,9 @@ name "subsec:PIC16_Header-Files-and-Libraries"
Pic device specific header and c source files are automatically generated
from MPLAB include files, which are published by Microchip with a special
requirement that they are only to be used with authentic Microchip devices.
- This requirement prevents to publish generated header and c source files
- under the GPL compatible license, so they are located in the non-free directory
- (see section
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "subsec:Search-Paths"
-
-\end_inset
-
-).
- In order to include them in include and library search paths, the
-\series bold
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\begin_inset Index idx
-status collapsed
-
-\begin_layout Plain Layout
--
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-/
-\end_layout
-
-\end_inset
-
--use-non-free
-\end_layout
-
-\end_inset
-
-
-\series default
- command line option should be defined.
-\begin_inset Newline newline
-\end_inset
-
-
-\begin_inset Newline newline
-\end_inset
-
-NOTE: the compiled code, which use non-free pic device specific libraries,
- is not GPL compatible!
+ As this restriction is incompatible with the goal of software freedom,
+ header files and libraries generated from these files are not included
+ in the SDCC package distributed with Guix.
\end_layout
\begin_layout Subsection
@@ -50659,195 +49381,6 @@ vfprintf.c
should also work, but is untested.
\end_layout
-\begin_layout Subsection
-Adding New Devices to the Port
-\end_layout
-
-\begin_layout Standard
-Adding support for a new 16
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-,
-\end_layout
-
-\end_inset
-
-bit PIC MCU requires the following steps:
-\end_layout
-
-\begin_layout Enumerate
-Create picDEVICE.c and picDEVICE.h from pDEVICE.inc using
-\begin_inset Newline newline
-\end_inset
-
-
-\family typewriter
-perl /path/to/sdcc/support/scripts/inc2h-pic16.pl
-\backslash
-
-\begin_inset Newline newline
-\end_inset
-
-/path/to/gputils/header/pDEVICE.inc
-\end_layout
-
-\begin_layout Enumerate
-
-\family typewriter
-mv picDEVICE.h /path/to/sdcc/device/non-free/include/pic16
-\end_layout
-
-\begin_layout Enumerate
-
-\family typewriter
-mv picDEVICE.c /path/to/sdcc/device/non-free/lib/pic16/libdev
-\end_layout
-
-\begin_layout Enumerate
-Either
-\begin_inset Separator latexpar
-\end_inset
-
-
-\end_layout
-
-\begin_deeper
-\begin_layout Enumerate
-add the new device to
-\family typewriter
-/path/to/sdcc/device/lib/pic16/libio/*.ignore
-\family default
- to suppress building any of the I/O libraries for the new device
-\begin_inset Foot
-status collapsed
-
-\begin_layout Plain Layout
-In fact, the
-\family typewriter
-.ignore
-\family default
- files are only used when auto-generating
-\family typewriter
-Makefile.am
-\family default
- using the
-\family typewriter
-.../libio/mkmk.sh
-\family default
- script.
-\end_layout
-
-\end_inset
-
-, or
-\end_layout
-
-\begin_layout Enumerate
-add the device (family) to
-\family typewriter
-/path/to/sdcc/support/scripts/pic18fam-h-gen.pl
-\family default
- to assign I/O styles, run the
-\family typewriter
-pic18fam-h-gen.pl
-\family default
- script to generate
-\family typewriter
-pic18fam.h.gen
-\family default
-, replace your existing
-\family typewriter
-pic18fam.h
-\family default
- with the generated file, and (if required) implement new I/O styles in
-
-\family typewriter
-/path/to/sdcc/device/include/pic16/{adc,i2c,usart}.h
-\family default
- and
-\family typewriter
-/path/to/sdcc/device/lib/pic16/libio/*/*.
-\end_layout
-
-\end_deeper
-\begin_layout Enumerate
-Edit
-\family typewriter
-/path/to/sdcc/device/include/pic16/pic18fregs.h
-\family default
-
-\begin_inset Newline newline
-\end_inset
-
-The file format is self-explanatory, just add
-\begin_inset Newline newline
-\end_inset
-
-
-\family typewriter
-#elif defined(picDEVICE)
-\begin_inset Newline newline
-\end_inset
-
-#
-\begin_inset ERT
-status collapsed
-
-\begin_layout Plain Layout
-
-
-\backslash
-
-\backslash
-
-\end_layout
-
-\end_inset
-
-include <picDEVICE.h>
-\family default
-
-\begin_inset Newline newline
-\end_inset
-
-at the right place (keep the file sorted, please).
-\end_layout
-
-\begin_layout Enumerate
-Edit
-\family typewriter
-/path/to/sdcc/device/include/pic16devices.txt
-\begin_inset Newline newline
-\end_inset
-
-
-\family default
-Copy and modify an existing entry or create a new one and insert it at the
- correct place (keep the file sorted, please).
-\end_layout
-
-\begin_layout Enumerate
-
-\family typewriter
-( cd /path/to/sdcc/device/non-free/lib/pic16 && sh update.sh )
-\end_layout
-
-\begin_layout Enumerate
-Recompile the pic16 libraries as described in
-\begin_inset CommandInset ref
-LatexCommand ref
-reference "subsec:pic16Libraries"
-
-\end_inset
-
- or just configure and build sdcc again from scratch (recommended).
-\end_layout
-
\begin_layout Subsection
Memory Models
\end_layout
@@ -75717,6 +74250,12 @@ This document was initially written by Sandeep Dutta and updated by SDCC
developers.
\end_layout
+\begin_layout Standard
+It has been modified from the original to reflect the removal of non-free
+ components and related functionality in the SDCC package distributed with
+ GNU Guix.
+\end_layout
+
\begin_layout Standard
All product names mentioned herein may be trademarks
\begin_inset Index idx
diff --git a/sdcc.spec b/sdcc.spec
index ccb3217..292b642 100644
--- a/sdcc.spec
+++ b/sdcc.spec
@@ -89,9 +89,7 @@ rm -rf $RPM_BUILD_ROOT
%files common
%defattr(-,root,root)
/usr/share/sdcc/include
-/usr/share/sdcc/non-free/include
/usr/share/sdcc/lib
-/usr/share/sdcc/non-free/lib
%files doc
%defattr(-,root,root)
@@ -104,6 +102,8 @@ rm -rf $RPM_BUILD_ROOT
- version updated to 4.2.0
* Sat Feb 20 2021 - pkk AT spth.de
- version updated to 4.0.0
+* Tue Dec 08 2020 - simon AT simonsouth.net
+- removed non-free include and lib directories
* Sat Jan 18 2020 - pkk AT spth.de
- version updated to 4.0.0
* Fri Apr 05 2019 - krauseph AT informatik.uni-freiburg.de
diff --git a/sdcc_vc.h.in b/sdcc_vc.h.in
index 8cf401b..19f5113 100644
--- a/sdcc_vc.h.in
+++ b/sdcc_vc.h.in
@@ -23,8 +23,6 @@
#define INCLUDE_DIR_SUFFIX "\\include"
#define LIB_DIR_SUFFIX "\\lib"
-#define NON_FREE_INCLUDE_DIR_SUFFIX "\\non-free\\include"
-#define NON_FREE_LIB_DIR_SUFFIX "\\non-free\\lib"
#define BIN2DATA_DIR "\\.."
#define PREFIX2BIN_DIR "\\bin"
diff --git a/sdccconf_in.h b/sdccconf_in.h
index 9e6e3c7..8681ceb 100644
--- a/sdccconf_in.h
+++ b/sdccconf_in.h
@@ -100,12 +100,6 @@
/* XXX */
#undef LIB_DIR_SUFFIX
-/* XXX */
-#undef NON_FREE_INCLUDE_DIR_SUFFIX
-
-/* XXX */
-#undef NON_FREE_LIB_DIR_SUFFIX
-
/* Define to 1 to disable the AVR port */
#undef OPT_DISABLE_AVR
@@ -133,9 +127,6 @@
/* XXX */
#undef OPT_DISABLE_MOS65C02
-/* XXX */
-#undef OPT_DISABLE_NON_FREE
-
/* XXX */
#undef OPT_DISABLE_PACKIHX
diff --git a/src/SDCCglobl.h b/src/SDCCglobl.h
index 9f0e52a..02a5fb8 100644
--- a/src/SDCCglobl.h
+++ b/src/SDCCglobl.h
@@ -290,7 +290,6 @@ struct options
int stack_size; /* MCS51/DS390 - Tells the linker to allocate this space for stack */
int acall_ajmp; /* MCS51 - Use acall/ajmp instead of lcall/ljmp */
int no_ret_without_call; /* MCS51 - Do not use ret independent of acall/lcall */
- int use_non_free; /* Search / include non-free licensed libraries and header files */
/* starting address of the segments */
int xstack_loc; /* initial location of external stack */
int stack_loc; /* initial value of internal stack pointer */
diff --git a/src/SDCCmain.c b/src/SDCCmain.c
index e7e8bd6..3b25061 100644
--- a/src/SDCCmain.c
+++ b/src/SDCCmain.c
@@ -143,7 +143,6 @@ char buffer[PATH_MAX * 2];
#define OPTION_DATA_SEG "--dataseg"
#define OPTION_DOLLARS_IN_IDENT "--fdollars-in-identifiers"
#define OPTION_SIGNED_CHAR "--fsigned-char"
-#define OPTION_USE_NON_FREE "--use-non-free"
#define OPTION_PEEP_RETURN "--peep-return"
#define OPTION_NO_PEEP_RETURN "--no-peep-return"
#define OPTION_NO_OPTSDCC_IN_ASM "--no-optsdcc-in-asm"
@@ -195,7 +194,6 @@ static const OPTION optionsTable[] = {
{0, OPTION_STD, NULL, "Determine the language standard (c89, c99, c11, c23, sdcc89 etc.)"},
{0, OPTION_DOLLARS_IN_IDENT, &options.dollars_in_ident, "Permit '$' as an identifier character"},
{0, OPTION_SIGNED_CHAR, &options.signed_char, "Make \"char\" signed by default"},
- {0, OPTION_USE_NON_FREE, &options.use_non_free, "Search / include non-free licensed libraries and header files"},
{0, NULL, NULL, "Code generation options"},
{'m', NULL, NULL, "Set the port to use e.g. -mz80."},
@@ -2231,10 +2229,6 @@ preProcess (char **envp)
else
addSet (&preArgvSet, Safe_strdup ("-D__SDCC_CHAR_UNSIGNED"));
- /* set the macro for non-free */
- if (options.use_non_free)
- addSet (&preArgvSet, Safe_strdup ("-D__SDCC_USE_NON_FREE"));
-
/* set the macro for large model */
switch (options.model)
{
@@ -2478,12 +2472,6 @@ setIncludePath (void)
* 6. - $SDCC_HOME/PREFIX2DATA_DIR/INCLUDE_DIR_SUFFIX
* 7. - path(argv[0])/BIN2DATA_DIR/INCLUDE_DIR_SUFFIX
* 8. - DATADIR/INCLUDE_DIR_SUFFIX (only on *nix)
- * 9. - $SDCC_HOME/PREFIX2DATA_DIR/NON_FREE_INCLUDE_DIR_SUFFIX/target
- * 10. - path(argv[0])/BIN2DATA_DIR/NON_FREE_INCLUDE_DIR_SUFFIX/target
- * 11. - DATADIR/NON_FREE_INCLUDE_DIR_SUFFIX/target (only on *nix)
- * 12. - $SDCC_HOME/PREFIX2DATA_DIR/NON_FREE_INCLUDE_DIR_SUFFIX
- * 13. - path(argv[0])/BIN2DATA_DIR/NON_FREE_INCLUDE_DIR_SUFFIX
- * 14. - DATADIR/NON_FREE_INCLUDE_DIR_SUFFIX (only on *nix)
*/
if (!options.nostdinc)
@@ -2499,17 +2487,6 @@ setIncludePath (void)
includeDirsSet = processStrSet (includeDirsSet, NULL, port->target, NULL);
mergeSets (&includeDirsSet, tempSet);
- if (options.use_non_free)
- {
- set *tempSet1;
-
- tempSet = processStrSet (dataDirsSet, NULL, NON_FREE_INCLUDE_DIR_SUFFIX, NULL);
- tempSet1 = processStrSet (tempSet, NULL, DIR_SEPARATOR_STRING, NULL);
- tempSet1 = processStrSet (tempSet1, NULL, port->target, NULL);
- mergeSets (&tempSet1, tempSet);
- mergeSets (&includeDirsSet, tempSet1);
- }
-
if ((p = getenv (SDCC_INCLUDE_NAME)) != NULL)
{
struct dbuf_s dbuf;
@@ -2534,9 +2511,6 @@ setLibPath (void)
* 3. - $SDCC_HOME/PREFIX2DATA_DIR/LIB_DIR_SUFFIX/<model>
* 4. - path(argv[0])/BIN2DATA_DIR/LIB_DIR_SUFFIX/<model>
* 5. - DATADIR/LIB_DIR_SUFFIX/<model> (only on *nix)
- * 6. - $SDCC_HOME/PREFIX2DATA_DIR/NON_FREE_LIB_DIR_SUFFIX/<model>
- * 7. - path(argv[0])/BIN2DATA_DIR/NON_FREE_LIB_DIR_SUFFIX/<model>
- * 8. - DATADIR/NON_FREE_LIB_DIR_SUFFIX/<model> (only on *nix)
*/
if (!options.nostdlib)
@@ -2553,13 +2527,6 @@ setLibPath (void)
dbuf_makePath (&dbuf, LIB_DIR_SUFFIX, port->general.get_model ? port->general.get_model () : targetname);
libDirsSet = processStrSet (dataDirsSet, NULL, dbuf_c_str (&dbuf), NULL);
- if (options.use_non_free)
- {
- dbuf_set_length (&dbuf, 0);
- dbuf_makePath (&dbuf, NON_FREE_LIB_DIR_SUFFIX, port->general.get_model ? port->general.get_model () : targetname);
- mergeSets (&libDirsSet, processStrSet (dataDirsSet, NULL, dbuf_c_str (&dbuf), NULL));
- }
-
if ((p = getenv (SDCC_LIB_NAME)) != NULL)
{
addSetHead (&libDirsSet, Safe_strdup (p));
diff --git a/src/pic14/main.c b/src/pic14/main.c
index 304c79b..9cbb9e8 100644
--- a/src/pic14/main.c
+++ b/src/pic14/main.c
@@ -42,7 +42,6 @@ static OPTION _pic14_poptions[] =
{ 0, "--no-pcode-opt", &pic14_options.disable_df, "disable (slightly faulty) optimization on pCode" },
{ 0, OPTION_STACK_SIZE, &options.stack_size, "sets the size if the argument passing stack (default: 16, minimum: 4)", CLAT_INTEGER },
{ 0, "--no-extended-instructions", &pic14_options.no_ext_instr, "forbid use of the extended instruction set (e.g., ADDFSR)" },
- { 0, "--no-warn-non-free", &pic14_options.no_warn_non_free, "suppress warning on absent --use-non-free option" },
{ 0, NULL, NULL, NULL }
};
@@ -180,16 +179,6 @@ _pic14_finaliseOptions (void)
addSet (&preArgvSet, Safe_strdup (dbuf_detach_c_str (&dbuf)));
}
- if (!pic14_options.no_warn_non_free && !options.use_non_free)
- {
- fprintf(stderr,
- "WARNING: Command line option --use-non-free not present.\n"
- " When compiling for PIC14/PIC16, please provide --use-non-free\n"
- " to get access to device headers and libraries.\n"
- " If you do not use these, you may provide --no-warn-non-free\n"
- " to suppress this warning (not recommended).\n");
- } // if
-
}
static void
diff --git a/src/pic14/main.h b/src/pic14/main.h
index 4275b65..0dc8c86 100644
--- a/src/pic14/main.h
+++ b/src/pic14/main.h
@@ -5,7 +5,6 @@ typedef struct {
unsigned int isLibrarySource:1;
int disable_df;
int no_ext_instr;
- int no_warn_non_free;
} pic14_options_t;
extern pic14_options_t pic14_options;
diff --git a/src/pic16/device.h b/src/pic16/device.h
index 41a1b79..9c642e3 100644
--- a/src/pic16/device.h
+++ b/src/pic16/device.h
@@ -99,7 +99,6 @@ typedef struct {
int gstack;
unsigned int debgen;
int xinst;
- int no_warn_non_free;
} pic16_options_t;
extern pic16_options_t pic16_options;
diff --git a/src/pic16/main.c b/src/pic16/main.c
index 9557a10..d650e66 100644
--- a/src/pic16/main.c
+++ b/src/pic16/main.c
@@ -660,7 +660,6 @@ OPTION pic16_optionsTable[]= {
{ 0, "--pcode-verbose", &pic16_pcode_verbose, "dump pcode related info"},
{ 0, "--calltree", &pic16_options.dumpcalltree, "dump call tree in .calltree file"},
{ 0, "--gstack", &pic16_options.gstack, "trace stack pointer push/pop to overflow"},
- { 0, "--no-warn-non-free", &pic16_options.no_warn_non_free, "suppress warning on absent --use-non-free option" },
{ 0, NULL, NULL, NULL}
};
@@ -945,16 +944,6 @@ _pic16_finaliseOptions (void)
addSet (&asmOptionsSet, Safe_strdup ("-D__STACK_MODEL_SMALL"));
}
- if (!pic16_options.no_warn_non_free && !options.use_non_free)
- {
- fprintf(stderr,
- "WARNING: Command line option --use-non-free not present.\n"
- " When compiling for PIC14/PIC16, please provide --use-non-free\n"
- " to get access to device headers and libraries.\n"
- " If you do not use these, you may provide --no-warn-non-free\n"
- " to suppress this warning (not recommended).\n");
- } // if
-
dbuf_destroy (&dbuf);
}
@@ -984,7 +973,6 @@ _pic16_setDefaultOptions (void)
pic16_options.ip_stack = 1; /* set to 1 to enable ipop/ipush for stack */
pic16_options.gstack = 0;
pic16_options.debgen = 0;
- pic16_options.no_warn_non_free = 0;
}
static const char *
diff --git a/src/regression/Makefile b/src/regression/Makefile
index 634e970..9a7a78a 100644
--- a/src/regression/Makefile
+++ b/src/regression/Makefile
@@ -107,12 +107,12 @@ endif
CC = $(top_builddir)/bin/sdcc
# compiler options
-CFLAGS = --no-warn-non-free -m$(ARCH) -p$(DEV) --fsigned-char --i-code-in-asm --fverbose-asm --std-c99
-CFLAGS += --nostdinc -I$(top_srcdir)/device/include/$(ARCH) -I$(top_srcdir)/device/non-free/include/$(ARCH) -I$(top_srcdir)/device/include
+CFLAGS = -m$(ARCH) -p$(DEV) --fsigned-char --i-code-in-asm --fverbose-asm --std-c99
+CFLAGS += --nostdinc -I$(top_srcdir)/device/include/$(ARCH) -I$(top_srcdir)/device/include
# linker options (for sdcc)
CFLAGS += -Wl,-l,-O2
-CFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/$(ARCH) -L$(top_builddir)/device/non-free/lib/build/$(ARCH)
+CFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/$(ARCH)
# linker libraries
LIB_SUFFIX = $(LIB_E)$(LIB_O)$(LIB_X)
diff --git a/support/regression/ports/pic14/spec.mk b/support/regression/ports/pic14/spec.mk
index b0b0867..2d5cdd3 100644
--- a/support/regression/ports/pic14/spec.mk
+++ b/support/regression/ports/pic14/spec.mk
@@ -16,13 +16,9 @@ EMU = ${WINE} ${GPSIM}
ifndef SDCC_BIN_PATH
ifndef CROSSCOMPILING
- SDCCFLAGS += --nostdinc -I$(top_srcdir)/device/include/pic14 -I$(top_srcdir)/device/non-free/include/pic14 -I$(top_srcdir)
- LINKFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/pic14 -L$(top_builddir)/device/non-free/lib/build/pic14
- else
- SDCCFLAGS += --use-non-free
+ SDCCFLAGS += --nostdinc -I$(top_srcdir)/device/include/pic14 -I$(top_srcdir)
+ LINKFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/pic14
endif
-else
- SDCCFLAGS += --use-non-free
endif
ifdef CROSSCOMPILING
@@ -30,7 +26,6 @@ ifdef CROSSCOMPILING
endif
SDCCFLAGS += -mpic14 -pp16f877 --less-pedantic
-SDCCFLAGS += --no-warn-non-free
LINKFLAGS += libsdcc.lib libm.lib
OBJEXT = .o
diff --git a/support/regression/ports/pic16/spec.mk b/support/regression/ports/pic16/spec.mk
index 15b4028..3b79cfe 100644
--- a/support/regression/ports/pic16/spec.mk
+++ b/support/regression/ports/pic16/spec.mk
@@ -16,13 +16,9 @@ EMU_INPUT = -c $(PORTS_DIR)/pic16/gpsim.cmd
ifndef SDCC_BIN_PATH
ifndef CROSSCOMPILING
- SDCCFLAGS += --nostdinc -I$(top_srcdir)/device/include/pic16 -I$(top_srcdir)/device/non-free/include/pic16 -I$(top_srcdir)
- LINKFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/pic16 -L$(top_builddir)/device/non-free/lib/build/pic16
- else
- SDCCFLAGS += --use-non-free
+ SDCCFLAGS += --nostdinc -I$(top_srcdir)/device/include/pic16 -I$(top_srcdir)
+ LINKFLAGS += --nostdlib -L$(top_builddir)/device/lib/build/pic16
endif
-else
- SDCCFLAGS += --use-non-free
endif
ifdef CROSSCOMPILING
@@ -31,7 +27,6 @@ endif
SDCCFLAGS += -mpic16 -pp18f452 --less-pedantic -Wl,-q
SDCCFLAGS += --no-peep
-SDCCFLAGS += --no-warn-non-free
LINKFLAGS += libsdcc.lib libc18f.lib libm18f.lib
OBJEXT = .o
diff --git a/support/scripts/cinc2h.pl b/support/scripts/cinc2h.pl
index 8558135..30d72b7 100755
--- a/support/scripts/cinc2h.pl
+++ b/support/scripts/cinc2h.pl
@@ -39,58 +39,10 @@
-------------------------------------------------
- Steps to add a new target device to SDCC/PIC16:
- (Following Raphael Neider <rneider AT web.de>)
-
- 1. Create the picDEVICE.c and picDEVICE.h from pDEVICE.inc using
- ./cinc2h.pl -p 18f4520 -cb -cp -gp "path/to/gputils_source" -o "path/to/output"
-
- 2. mv picDEVICE.h $SDCC/device/non-free/include/pic16
- 3. mv picDEVICE.c $SDCC/device/non-free/lib/pic16/libdev
- 4. either
-
- (a) adjust $SDCC/device/lib/pic16/libio/*.ignore
- if the device does not support ADC, I2C, or USART
- --- OR ---
- (b) adjust
- * SDCC/scripts/pic18fam-h-gen.pl
- * SDCC/device/include/pic16/adc.h (if required)
- * SDCC/device/include/pic16/usart.h (if required)
- * SDCC/device/lib/pic16/libio/*/* (if required)
- to add the new device to the appropriate I/O style
- and implement new styles (if required).
-
- Having modified pic18fam-h-gen.pl, you need to run the
- script to generate pic18fam.h.gen, which in turn must
- then replace your .../include/pic16/pic18fam.h to take
- effect; see pic18fam-h-gen.pl for usage information.
- 6. edit $SDCC/device/include/pic16/pic18fregs.h
- 7. edit $SDCC/device/include/pic16/pic16devices.txt
- 8. run cd $SDCC/device/non-free/lib/pic16 && sh update.sh
- to regenerate .../libdev/Makefile.am and processors.ac
-
- The file format of steps 6 and 7 is self explanatory, in most
- if not all cases you can copy and paste another device's records
- and adjust them to the newly added device.
-
- -------------------------------------------------
-
- Steps to add a new target device to SDCC/PIC14:
-
- 1. Create the picDEVICE.c and picDEVICE.h from pDEVICE.inc using
- ./cinc2h.pl -p 16f1503 -cb -cp -gp "path/to/gputils_source" -o "path/to/output"
-
- 2. mv picDEVICE.h $SDCC/device/non-free/include/pic14
- 3. mv picDEVICE.c $SDCC/device/non-free/lib/pic14/libdev
- 4. add DEVICE to $SDCC/device/non-free/lib/pic14/libdev/devices.txt
- (The names of the enhanced devices the "# enhanced cores" line
- after follow.)
-
- 5. edit $SDCC/device/include/pic14/pic14devices.txt
-
- The file format of step 5 is self explanatory, in most if not all
- cases you can copy and paste another device's records and adjust
- them to the newly added device.
+ For its inclusion in the SDCC package distributed with GNU Guix
+ (https://guix.gnu.org/) this file has been modified from the
+ original to remove instructions on its use with non-free software
+ and to update the output of the print_license subroutine below.
$Id: cinc2h.pl 9450 2016-01-09 16:47:43Z molnarkaroly $
=cut
@@ -1345,10 +1297,9 @@ sub print_license($)
* Microchip header (.inc) and linker script (.lkr) files Microchip
* requires that "The header files should state that they are only to be
* used with authentic Microchip devices" which makes them incompatible
- * with the GPL. Pic device libraries and header files are located at
- * non-free/lib and non-free/include directories respectively.
- * Sdcc should be run with the --use-non-free command line option in
- * order to include non-free header files and libraries.
+ * with the GPL. These non-free libraries and header files (and the
+ * build and run-time options that enable their use) are omitted in the
+ * SDCC package distributed with GNU Guix.
*
* See http://sdcc.sourceforge.net/ for the latest information on sdcc.
*/
diff --git a/support/scripts/pic14-header-parser.pl b/support/scripts/pic14-header-parser.pl
index 4413c25..57c6076 100755
--- a/support/scripts/pic14-header-parser.pl
+++ b/support/scripts/pic14-header-parser.pl
@@ -63,9 +63,7 @@ use constant P_SHOW_ONLY_NAME => 3;
my @default_paths =
(
- '/usr/share/sdcc/non-free/include',
'/usr/share/sdcc/include',
- '/usr/local/share/sdcc/non-free/include',
'/usr/local/share/sdcc/include'
);
diff --git a/support/scripts/pic16-header-parser.pl b/support/scripts/pic16-header-parser.pl
index 6db417a..4b35225 100755
--- a/support/scripts/pic16-header-parser.pl
+++ b/support/scripts/pic16-header-parser.pl
@@ -62,9 +62,7 @@ use constant P_SHOW_ONLY_NAME => 3;
my @default_paths =
(
- '/usr/share/sdcc/non-free/include',
'/usr/share/sdcc/include',
- '/usr/local/share/sdcc/non-free/include',
'/usr/local/share/sdcc/include'
);
diff --git a/support/scripts/sdcc.nsi b/support/scripts/sdcc.nsi
index 37393d7..997b2fe 100644
--- a/support/scripts/sdcc.nsi
+++ b/support/scripts/sdcc.nsi
@@ -487,11 +487,6 @@ ${Section} "SDCC include files" SEC05
SetOutPath "$INSTDIR\include"
File "${DEV_ROOT}\include\*.h"
-
- SetOutPath "$INSTDIR\non-free\include\pic14"
- File "${DEV_ROOT}\non-free\include\pic14\*.h"
- SetOutPath "$INSTDIR\non-free\include\pic16"
- File "${DEV_ROOT}\non-free\include\pic16\*.h"
${SectionEnd}
${Section} "SDCC DS390 library" SEC06
@@ -589,18 +584,12 @@ ${Section} "SDCC PIC16 library" SEC21
SetOutPath "$INSTDIR\lib\pic16"
File "${DEV_ROOT}\lib\pic16\*.o"
File "${DEV_ROOT}\lib\pic16\*.lib"
-
- SetOutPath "$INSTDIR\non-free\lib\pic16"
- File "${DEV_ROOT}\non-free\lib\pic16\*.lib"
${SectionEnd}
${Section} "SDCC PIC14 library" SEC22
SectionIn 1 2
SetOutPath "$INSTDIR\lib\pic14"
File "${DEV_ROOT}\lib\pic14\*.lib"
-
- SetOutPath "$INSTDIR\non-free\lib\pic14"
- File "${DEV_ROOT}\non-free\lib\pic14\*.lib"
${SectionEnd}
${Section} "SDCC STM8 medium model library" SEC23
@@ -709,10 +698,6 @@ ${Section} "SDCC library sources" SEC25
File "${DEV_ROOT}\lib\src\pic14\libsdcc\enhanced\*.inc"
# File "${DEV_ROOT}\lib\src\pic14\libsdcc\Makefile"
- SetOutPath "$INSTDIR\non-free\lib\src\pic14\libdev"
- File "${DEV_ROOT}\non-free\lib\src\pic14\libdev\*.c"
-# File "${DEV_ROOT}\non-free\lib\src\pic14\libdev\Makefile"
-
SetOutPath "$INSTDIR\lib\src\pic14\libm"
# File "${DEV_ROOT}\lib\src\pic14\libm\*.c"
@@ -764,10 +749,6 @@ ${Section} "SDCC library sources" SEC25
File "${DEV_ROOT}\lib\src\pic16\libc\utils\*.S"
# File "${DEV_ROOT}\lib\src\pic16\libc\utils\Makefile"
- SetOutPath "$INSTDIR\non-free\lib\src\pic16\libdev"
- File "${DEV_ROOT}\non-free\lib\src\pic16\libdev\*.c"
-# File "${DEV_ROOT}\non-free\lib\src\pic16\libdev\Makefile"
-
SetOutPath "$INSTDIR\lib\src\pic16\libio"
File "${DEV_ROOT}\lib\src\pic16\libio\*.ignore"
# File "${DEV_ROOT}\lib\src\pic16\libio\Makefile"
@@ -1169,13 +1150,9 @@ ${Section} Uninstall SECUNINSTALL
Delete "$INSTDIR\lib\pic14\*.lib"
- Delete "$INSTDIR\non-free\lib\pic14\*.lib"
-
Delete "$INSTDIR\lib\pic16\*.o"
Delete "$INSTDIR\lib\pic16\*.lib"
- Delete "$INSTDIR\non-free\lib\pic16\*.lib"
-
Delete "$INSTDIR\lib\hc08\*.lib"
Delete "$INSTDIR\lib\s08\*.lib"
@@ -1259,9 +1236,7 @@ ${Section} Uninstall SECUNINSTALL
Delete "$INSTDIR\include\pic14\*.h"
Delete "$INSTDIR\include\pic14\*.txt"
Delete "$INSTDIR\include\pic14\*.inc"
- Delete "$INSTDIR\non-free\include\pic14\*.h"
Delete "$INSTDIR\include\pic16\*.h"
- Delete "$INSTDIR\non-free\include\pic16\*.h"
Delete "$INSTDIR\include\pic16\*.txt"
Delete "$INSTDIR\include\mcs51\*.h"
Delete "$INSTDIR\include\hc08\*.h"
@@ -1334,9 +1309,7 @@ ${Section} Uninstall SECUNINSTALL
Delete "$INSTDIR\uninstall.exe"
RMDir /r "$INSTDIR\lib\src\pic14"
- RMDir /r "$INSTDIR\non-free\lib\src\pic14"
RMDir /r "$INSTDIR\lib\src\pic16"
- RMDir /r "$INSTDIR\non-free\lib\src\pic16"
RMDir "$INSTDIR\lib\src\small"
RMDir "$INSTDIR\lib\src\medium"
RMDir "$INSTDIR\lib\src\large"
@@ -1367,12 +1340,9 @@ ${Section} Uninstall SECUNINSTALL
RMDir "$INSTDIR\lib\src\mos65c02"
RMDir "$INSTDIR\lib\src\s08-stack-auto"
RMDir "$INSTDIR\lib\src"
- RMDir "$INSTDIR\non-free\lib\src"
RMDir "$INSTDIR\lib\pic14"
- RMDir "$INSTDIR\non-free\lib\pic14"
RMDir "$INSTDIR\lib\pic16"
- RMDir "$INSTDIR\non-free\lib\pic16"
RMDir "$INSTDIR\lib\z80"
RMDir "$INSTDIR\lib\z180"
RMDir "$INSTDIR\lib\r2k"
@@ -1403,15 +1373,12 @@ ${Section} Uninstall SECUNINSTALL
RMDir "$INSTDIR\lib\mos65c02"
RMDir "$INSTDIR\lib\s08-stack-auto"
RMDir "$INSTDIR\lib"
- RMDir "$INSTDIR\non-free\lib"
RMDir "$INSTDIR\include\asm\z80"
RMDir "$INSTDIR\include\asm\r2k"
RMDir "$INSTDIR\include\asm\r3ka"
RMDir "$INSTDIR\include\asm\pic16"
- RMDir "$INSTDIR\non-free\include\asm\pic16"
RMDir "$INSTDIR\include\asm\pic14"
- RMDir "$INSTDIR\non-free\include\asm\pic14"
RMDir "$INSTDIR\include\asm\mcs51"
RMDir "$INSTDIR\include\asm\sm83"
RMDir "$INSTDIR\include\asm\ds390"
@@ -1420,17 +1387,12 @@ ${Section} Uninstall SECUNINSTALL
RMDir "$INSTDIR\include\asm"
RMDir "$INSTDIR\include\z180"
RMDir "$INSTDIR\include\pic14"
- RMDir "$INSTDIR\non-free\include\pic14"
RMDir "$INSTDIR\include\pic16"
- RMDir "$INSTDIR\non-free\include\pic16"
RMDir "$INSTDIR\include\mcs51"
RMDir "$INSTDIR\include\hc08"
RMDir "$INSTDIR\include\ds400"
RMDir "$INSTDIR\include\ds390"
RMDir "$INSTDIR\include"
- RMDir "$INSTDIR\non-free\include"
-
- RMDir "$INSTDIR\non-free"
!ifdef FULL_DOC
RMDir /r "$INSTDIR\doc"
diff --git a/support/scripts/sdcc_cygwin_mingw32 b/support/scripts/sdcc_cygwin_mingw32
index 5575663..2588d4f 100755
--- a/support/scripts/sdcc_cygwin_mingw32
+++ b/support/scripts/sdcc_cygwin_mingw32
@@ -6,9 +6,7 @@
--datarootdir="/sdcc" \
docdir="\${datarootdir}/doc" \
include_dir_suffix="include" \
-non_free_include_dir_suffix="non-free/include" \
lib_dir_suffix="lib" \
-non_free_lib_dir_suffix="non-free/lib" \
sdccconf_h_dir_separator="\\\\" \
CC="gcc -mno-cygwin" \
CXX="g++ -mno-cygwin"
diff --git a/support/scripts/sdcc_mingw32 b/support/scripts/sdcc_mingw32
index 96e3280..050761e 100755
--- a/support/scripts/sdcc_mingw32
+++ b/support/scripts/sdcc_mingw32
@@ -19,9 +19,7 @@ export SDCCCONFIGUREFLAGS=" \
--datarootdir=/sdcc \
docdir=\${datarootdir}/doc \
include_dir_suffix=include \
-non_free_include_dir_suffix=non-free/include \
lib_dir_suffix=lib \
-non_free_lib_dir_suffix=non-free/lib \
sdccconf_h_dir_separator=\\\\ \
--disable-device-lib \
--host=i586-mingw32msvc --build=unknown-unknown-linux-gnu"
