aboutsummaryrefslogtreecommitdiff
Normally a ChangeLog is generated at "make dist" time and available in
source tarballs.

If not, see the Git commit log at <http://git.sv.gnu.org/cgit/guix.git/>.
owrap'>AgeCommit message (Expand)Author 2021-12-01gnu: system: Add LUKS2 support for the root file system....* gnu/bootloader/grub.scm (grub-configuration-file): Add 'insmod luks2'. * gnu/system/mapped-devices.scm (open-luks-device): Create '/run/cryptsetup/' directory. Signed-off-by: Ludovic Courtès <ludo@gnu.org> Josselin Poiret 2021-08-29Migrate to the new 'targets' field of bootloader-configuration....The old 'target' field is deprecated; adjust the sources to use the new 'targets' one instead. * doc/guix-cookbook.texi<target>: Replace by 'targets'. * gnu/bootloader/grub.scm: Likewise. * gnu/installer/parted.scm: Likewise. * gnu/machine/digital-ocean.scm: Likewise. * gnu/system/examples/asus-c201.tmpl: Likewise * gnu/system/examples/bare-bones.tmpl: Likewise * gnu/system/examples/bare-hurd.tmpl: Likewise * gnu/system/examples/beaglebone-black.tmpl: Likewise * gnu/system/examples/desktop.tmpl: Likewise * gnu/system/examples/docker-image.tmpl: Likewise * gnu/system/examples/lightweight-desktop.tmpl: Likewise * gnu/system/examples/vm-image.tmpl: Likewise * gnu/system/examples/yggdrasil.tmpl: Likewise * gnu/system/hurd.scm: Likewise * gnu/system/images/hurd.scm: Likewise * gnu/system/images/novena.scm: Likewise * gnu/system/images/pine64.scm: Likewise * gnu/system/images/pinebook-pro.scm: Likewise * gnu/system/images/rock64.scm: Likewise * gnu/system/install.scm: Likewise * gnu/system/vm.scm: Likewise * gnu/tests.scm: Likewise * gnu/tests/ganeti.scm: Likewise * gnu/tests/install.scm: Likewise * gnu/tests/nfs.scm: Likewise * gnu/tests/telephony.scm: Likewise * tests/boot-parameters.scm: Likewise * tests/system.scm: Likewise Maxim Cournoyer 2021-04-10bootloader: grub: Fix typo in docstring....* gnu/bootloader/grub.scm (install-grub-efi-netboot): Fix typo. Tobias Geerinckx-Rice 2021-01-17gnu: grub: Use installed unicode font....* gnu/bootloader/grub.scm (setup-gfxterm): Remove parameter font-file. Refer to the installed font in /boot, not in the store. (font-file): Delete obsolete function. (install-grub): When populating a disk-image, install the unicode font, too. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan 2020-12-21system: Allow separated /boot and encrypted root....* gnu/bootloader/grub.scm (grub-configuration-file): New parameter store-crypto-devices. [crypto-devices]: New helper function. [builder]: Use crypto-devices. * gnu/machine/ssh.scm (roll-back-managed-host): Use boot-parameters-store-crypto-devices to provide its contents to the bootloader configuration generation process. * gnu/tests/install.scm (%encrypted-root-not-boot-os, %encrypted-root-not-boot-os): New os declaration. (%encrypted-root-not-boot-installation-script): New script, whose contents were initially taken from %encrypted-root-installation-script. (%test-encrypted-root-not-boot-os): New test. * gnu/system.scm (define-module): Export operating-system-bootoader-crypto-devices and boot-parameters-store-crypto-devices. (<boot-parameters>): Add field store-crypto-devices. (read-boot-parameters): Parse store-crypto-devices field. [uuid-sexp->uuid]: New helper function extracted from device-sexp->device. (operating-system-bootloader-crypto-devices): New function. (operating-system-bootcfg): Use operating-system-bootloader-crypto-devices to provide its contents to the bootloader configuration generation process. (operating-system-boot-parameters): Add store-crypto-devices to the generated boot-parameters. (operating-system-boot-parameters-file): Likewise to the file with the serialized structure. * guix/scripts/system.scm (reinstall-bootloader): Use boot-parameters-store-crypto-devices to provide its contents to the bootloader configuration generation process. * tests/boot-parameters.scm (%default-store-crypto-devices): New variable. (%grub-boot-parameters, test-read-boot-parameters): Use %default-store-crypto-devices. (tests store-crypto-devices): New tests. Miguel Ángel Arruga Vivas 2020-12-15Revert "gnu: grub: Fix unicode font loading when booting over TFTP."...This reverts commit 03fb57ff77b57de510b59485845ed7cb4e0a77a7, which breaks most system tests. Specifically, grub.cfg.drv fails to build: ERROR: In procedure canonicalize-path: In procedure canonicalize-path: No such file or directory Ludovic Courtès 2020-12-14gnu: grub: Fix unicode font loading when booting over TFTP....* gnu/bootloader/grub.scm (eye-candy)(font-file): Fix unicode font loading when booting over TFTP. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan 2020-11-17bootloader: grub: Skip install-grub-efi when producing a disk image....Fixes <http://issues.guix.gnu.org/44353>. Every bootloader should try their best to install themselves using only the MOUNT-POINT and otherwise do nothing. This requirement comes from the necessity to call INSTALL-GRUB when installing the (non-EFI) GRUB bootloader, which needs to populate the root file system with extra modules that cannot be fit in the core.img file, limited in size to 491520 bytes (by the i386-pc format required for legacy BIOS compatibility). As introducing bootloader knowledge at the level of the image code is undesirable, every bootloader should be adapted to support this fall-back for their installation procedure (TODO). * gnu/bootloader/grub.scm (install-grub-efi)[efi-dir]: Skip when the EFI-DIR argument is set to #f. Maxim Cournoyer 2020-11-01system: Generate grub locale directory for grub.cfg....* gnu/bootloader/grub.scm (grub-locale-directory): New function. (grub-configuration-file)[locale-config]: Use grub-locale-directory and avoid the extra search when eye-candy have performed it. Miguel Ángel Arruga Vivas 2020-10-30system: Fix dependency for grub.cfg generation....* gnu/bootloader/grub.scm (eye-candy)[font-file]: Use the bootloader package provided with the configuration. Miguel Ángel Arruga Vivas 2020-10-30system: Fix grub keymap with store in btrfs subvolume....* gnu/bootloader/grub.scm (grub-configuration-file) [keyboard-layout-config]: Use normalize-file. Miguel Ángel Arruga Vivas 2020-10-18system: Use locale information in grub.cfg....* gnu/bootloader/grub.scm (define-module): Add new dependency. (grub-configuration-file): Add locale keyword. (grub-configuration-file)[locale-config]: New variable with generated locale configuration when locale parameter has been provided. [builder]: Add locale-config. Miguel Ángel Arruga Vivas 2020-09-27gnu: grub: Support for network boot via TFTP....* gnu/bootloader/grub.scm (grub-efi-netboot-bootloader): New variable. (install-grub-efi-netboot): New procedure. (grub-root-search): Update comment. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan 2020-09-14gnu: grub: Support loading files from TFTP if the root filesystem is NFS....* gnu/bootloader/grub.scm (grub-root-search): Set the root to "(tftp)" if the searched-for file is stored on NFS. Stefan 2020-09-07bootloader: Use "define" instead of "define*" for all records....* gnu/bootloader/grub.scm (grub-minimal-bootloader): Use "define". (grub-efi-bootloader): Use "define". (grub-mkrescue-bootloader): Use "define". Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan 2020-09-06bootloader: Add comment about grub configuration files....* gnu/bootloader/grub.scm: Add comment about grub configuration files. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Stefan 2020-06-09bootloader: grub: Fix cross-compilation....This is a follow-up of 536c53d347291dcc75e1073af6e6c5c614e0fff4, that do not use the native version of "font-file", breaking cross-compilation. * gnu/bootloader/grub.scm (eye-candy): Use the native version of "font-file". Mathieu Othacehe 2020-06-09gnu: grub: Support graphical gfxterm on all systems....* gnu/bootloaders/grub.scm (eye-candy): Use gfxterm depending only on (bootloader-configuration (terminal-outputs …)), which defaults to '(gfxterm). This makes the system argument obsolete. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Stefan 2020-06-08bootloader: grub: Add support for multiboot....* gnu/bootloader/grub.scm (grub-configuration-file): Add support for multiboot. Jan (janneke) Nieuwenhuizen 2020-05-29bootloader: grub: Rename the btrfs-subvolume-file-name parameter....Following discussion in <https://issues.guix.gnu.org/37305>, it seems more appropriate to give the parameter a more generic name that better describes what it does. * gnu/bootloader/grub.scm (normalize-file): Rename the BTRFS-SUBVOLUME-FILE-NAME parameter to STORE-DIRECTORY-PREFIX, and always assume this argument to be a string. (eye-candy): Likewise. Default STORE-DIRECTORY-PREFIX to "". (grub-configuration-file): Likewise. * gnu/system.scm (operating-system-bootcfg): Adapt. Maxim Cournoyer 2020-05-29bootloader: grub: Use inheritance to define grub-minimal-bootloader....* gnu/bootloader/grub.scm (grub-minimal-bootloader): Inherit from grub-bootloader to avoid field redefinition. Mathieu Othacehe 2020-05-29bootloader: grub: Do not run grub-install when creating a disk-image....* gnu/bootloader/grub.scm (install-grub): When creating a disk-image, grub-install will fail because it lacks root permissions. In that case, do not run grub-install and only copy Grub modules to the /boot directory. Mathieu Othacehe 2020-05-29bootloader: Add 'disk-image-installer'....* gnu/bootloader.scm (<bootloader>)[disk-image-installer]: New field, (bootloader-disk-image-installer): export it. * gnu/bootloader/grub.scm (install-grub-disk-image): New procedure ... (grub-bootloader): ... used as "disk-image-installer" here. (grub-efi-bootloader): set "disk-image-installer" to #f. * gnu/system/image.scm (root-partition?, find-root-partition): Move to "Helpers" section. (root-partition-index): New procedure. (system-disk-image): Honor disk-image-installer, and use it to install the bootloader directly on the disk-image, if supported. Mathieu Othacehe 2020-05-20bootloader: grub: Allow booting from a Btrfs subvolume....* gnu/bootloader/grub.scm (strip-mount-point): Remove procedure. (normalize-file): Add procedure. (grub-configuration-file): New BTRFS-SUBVOLUME-FILE-NAME parameter. When defined, prepend its value to the kernel and initrd file names, using the NORMALIZE-FILE procedure. Adjust the call to EYE-CANDY to pass the BTRFS-SUBVOLUME-FILE-NAME argument. Normalize the KEYMAP file as well. (eye-candy): Add a BTRFS-SUBVOLUME-FILE-NAME parameter, and use it, along with the NORMALIZE-FILE procedure, to normalize the FONT-FILE and IMAGE nested variables. Adjust doc. * gnu/bootloader/depthcharge.scm (depthcharge-configuration-file): Adapt. * gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise. * gnu/system/file-systems.scm (btrfs-subvolume?) (btrfs-store-subvolume-file-name): New procedures. * gnu/system.scm (operating-system-bootcfg): Specify the Btrfs subvolume file name the store resides on to the `operating-system-bootcfg' procedure, using the new BTRFS-SUBVOLUME-FILE-NAME argument. * doc/guix.texi (File Systems): Add a Btrfs subsection to document the use of subvolumes. * gnu/tests/install.scm (%btrfs-root-on-subvolume-os) (%btrfs-root-on-subvolume-os-source) (%btrfs-root-on-subvolume-installation-script) (%test-btrfs-root-on-subvolume-os): New variables. Maxim Cournoyer 2020-05-19gnu: grub: Allow a PNG image and replace "aspect-ratio" with "resolution"....* gnu/bootloaders/grub.scm (<grub-image>): Remove this record and replace it by ... (<grub-theme>)[image]: ... this field with the default from %background-image, (<grub-theme>)[resolution]: ... this field with the defaults from 'width' and 'height' of 'grub-background-image'. (<grub-theme>)[images]: Remove this field. (svg->png): Rename to ... (image->png): ... and use 'copy-file' instead of 'svg->png', if the suffix of the image file is not ".svg". (grub-background-image): Remove the arguments 'width' and 'height'. (grub-theme-image): Add function. (grub-theme-resolution): Add function. (grub-theme-gfxmode): Add function. (grub-image): Remove function. (grub-image?): Remove function. (grub-image-aspect-ratio): Remove function. (grub-image-file): Remove function. (grub-theme-images): Remove function. (%default-theme): Remove variable. (%background-image): Remove variable. Using image formats different to SVG was not possible. For a <grub-image> to be chosen, the 'aspect-ratio' of it had to be 4/3, as the resolution of any image was defaulting to 1024 x 768. There was no code to determine the proper boot-resolution to make any use of a list of images with different aspect-ratios. It seems to be a better solution to only define a single image with any format, and use a given resolution only for the conversion from a SVG file. This also makes the use of a special <grub-image> record unnecessary. Moving the default values from '%background-image' and '%default-theme' into <grub-theme> makes a customisation easier without (inherit) and allows to remove the undocumented variables %background-image' and '%default-theme'. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Stefan 2020-05-16bootloader: grub: Refer to the native 'grub-mklayout' and font file....* gnu/bootloader/grub.scm (eye-candy): Refer to the native FONT-FILE. (keyboard-layout-file): Refer to the native 'grub-mklayout'. Ludovic Courtès 2020-04-08Merge branch 'master' into core-updates... Conflicts: etc/news.scm gnu/local.mk gnu/packages/check.scm gnu/packages/cross-base.scm gnu/packages/gimp.scm gnu/packages/java.scm gnu/packages/mail.scm gnu/packages/sdl.scm gnu/packages/texinfo.scm gnu/packages/tls.scm gnu/packages/version-control.scm Marius Bakke 2020-04-06system: Allow for comma-separated keyboard layouts....Reported by Florian Pelz <pelzflorian@pelzflorian.de>. * gnu/bootloader/grub.scm (keyboard-layout-file): Replace commas with hyphens in the first argument to 'computed-file'. * gnu/system/keyboard.scm (keyboard-layout->console-keymap): Likewise. * doc/guix.texi (Keyboard Layout): Add example. Ludovic Courtès 2020-03-29gnu: bootloader: Add grub-minimal-bootloader....* gnu/bootloader/grub.scm (grub-minimal-bootloader): New variable. Jan Nieuwenhuizen 2020-03-17bootloader: grub: Refactor eye-candy a bit....* gnu/bootloader/grub.scm (eye-candy)[setup-gfxterm-body]: Define the GFXMODE binding using AND-LET* instead of chained AND=>. Add a comment about supporting graphical mode on other systems than x86. Generate configuration string using FORMAT rather than STRING-APPEND. Maxim Cournoyer 2020-03-17bootloader: grub: Use the all_video module in graphic mode....* gnu/bootloader/grub.scm (eye-candy): Load the module 'all_video' which automatically loads all the available and relevant video modules. Maxim Cournoyer 2020-01-25bootloader: grub: Add gfxmode (resolution) override....* gnu/bootloader/grub.scm (<grub-theme>): Add `gfxmode' entry. (eye-candy): Use it. * doc/guix.texi (Bootloader Configuration): Document it. Jan Nieuwenhuizen 2020-01-07Revert "bootloader: grub: Add gfxmode (resolution) override."...This reverts commit a23091880d4dc6115acbfa3b7ef09d731fc5abb0. It causes ‘guix pull’ to fail: <https://paste.debian.net/plain/1125061>. Tobias Geerinckx-Rice 2020-01-07bootloader: grub: Add gfxmode (resolution) override....* gnu/bootloader/grub.scm (<grub-theme>): Add `gfxmode' entry. (eye-candy): Use it. * doc/guix.texi (Bootloader Configuration): Document it. Jan Nieuwenhuizen 2020-01-06Adjust module autoloads....In Guile < 2.9.7, autoloading a module would give you access to all its bindings. In future versions, autoloading a module gives access only to the listed bindings, as per #:select (see <https://bugs.gnu.org/38895>). This commit adjusts autoloads to the new semantics, allowing Guix to be built with Guile 2.9.7/2.9.8. * guix/build/download.scm <top level>: Remove call to 'module-autoload!'. (load-gnutls): New procedure. (tls-wrap): Call it. * guix/git.scm <top level>: Remove call to 'module-autoload!'. (load-git-submodules): New procedure. (update-submodules): Call it instead of 'resolve-interface'. * gnu/bootloader/grub.scm: Replace #:autoload with #:use-module. * gnu/packages.scm: Likewise. * gnu/packages/ssh.scm: Likewise. * gnu/packages/tex.scm: Likewise. * gnu/services/cuirass.scm: Likewise. * gnu/services/mcron.scm: Likewise. * guix/lint.scm: Augment list of bindings in #:autoload. * guix/scripts/build.scm: Likewise. * guix/scripts/gc.scm: Likewise. * guix/scripts/pack.scm: Likewise. * guix/scripts/publish.scm: Likewise. * guix/scripts/pull.scm: Likewise. * guix/utils.scm: Remove unnecessary #:autoload clauses; replace one of them with #:use-module. Ludovic Courtès 2020-01-03bootloader: Mark "grub.cfg" and "extlinux.conf" as non-substitutable....Suggested by <pkill9@runbox.com>. * gnu/bootloader/grub.scm (grub-configuration-file): Pass #:options to 'computed-file'. * gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise. Ludovic Courtès 2019-12-23bootloader: grub: Add firmware setup entry....* gnu/bootloader/grub.scm (grub-configuration-file): Add 'Firmware setup' entry for EFI platform. Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org> Brice Waegeneire 2019-05-09bootloader: grub: Remove unneeded 'terminal_output'....Fixes <https://bugs.gnu.org/35585>. Reported by Florian Pelz <pelzflorian@pelzflorian.de>. This statement was added in 8d058e7b1b1a409d3d9cc29c5650a98db4e78783 but turned out to be unnecessary. * gnu/bootloader/grub.scm (grub-configuration-file): Remove 'terminal_output' statement. Ludovic Courtès